Step by Step guide / Checklists

Hi, I am missing the first page in the EFB, the "Cockpit Preparation Checklist". The display is just blank. If I go to the next page - Before Start + PB everything is completely in place. But I can't jump back because the page is missing. Where is the folder with the checklist hidden, or what should I do. Thanks CFG874 Bernd P3dv4.5 last version and Airbusse also up to date. Hallo, Bei mir fehlt im EFB die erste Seite, die " Cockpit Preparation Checklist " . Das Display ist einfach leer. Wenn ich auf die nächste Seite gehe -Before Start + PB ist alles komplett vorhanden. Ich kann aber auch nicht wieder zurück springen,da die Seite ja fehlt.…

Please, would it be possible to have a complete written list in order during the checklist for the A330 (I do the check without the copilot). Sometimes there are some terms that I can't understand. I know that in this case there is the Skip function. Problem using this function sometimes blocks the script... Maybe there is one but I haven't found it. Thank you and Regards, A330 v1.0.4.2 P3Dv5.1 Richard.

After the engine starts 2 and 1 the check list stop 2 work. Thanks Atti

Hello, on Avsim.com and other sites, there is modified American and other sounds for the Cabin crew and flight attendants for the A320 series. Does anyone have or will make different crew/cabin soundest for the A-330? Thanks Nikita

The checklist is rather a little slow, much slower than last gen, is there a way to speed it up? Also got stuck after takeoff using co-pilot

I was just wondering if there was a tutorial for this beauty in the works? If so an estimated release date. I have found your tutorials very useful in the past and hope to have one for this aircraft too.

Hi. This is aa new problem for me, and I've never had it before. If I am in the Cockpit and start the first checklist off from the MCDU, the views I am getting constantly change! I normally have the aircraft start at point 2, so I have power, and I want to run checklist 1, and it starts perfectly, but the view in the cockpit switches when each call is made. How do I turn each call off? Gaz

Hello. I have updated A320 to version 1.4.2.0 and on my checklist the views switch in a circle and at some point Prepar3D freezes and turns off. This was not the case before the update. I have EZCA installed and without it the same thing.

Hi I have a trouble on checklist and pushback after update to 1.4.2. My sim is P3d V5 HF1, and a320, a321 pro. I had the problem on airplane of a321 IAE and a321CFM . I did not check how of a320. In the menu of MCDU3, I do not select GSX as for pushback. I did not have such a problem on former version. Problem is; Start sim, select a321, power on, set load and fuel in MCDU3, set flight plan in MCDU1, power on APU, then start checklist in MCDU3. Start cockpit preparation checklist without FO's help, this goes well till the end. Then push the key in MCDU3 of pushback way of AS PUSHBACK in ground service. Nothing changes or h…

Hello, The communication between co-pilot + pilot with the checklists is too slow. I have the impression one of them is flirting with the stewardes in the back of the galley and each time I have to run to the front of the cockpit, it takes that long. Please look again. Thanks CFG874 Bernd Hallo, Die Kommunikation zwischen Co Pilot + Pilot bei den Checklisten ist zu langsam. Ich habe den Eindruck einer von beiden Flirtet hinten in der Galley mit der Stewardes und muß jedesmal erst nach vorn ins Cockpit rennen, so lange dauert es. Bitte nochmal ansehen. Danke CFG874 Bernd

I am using the Checklist without the Copilot (Checklist = ON, Copilot= OFF). In the „Before Start“ checklist, the call „External Power Off“ does not react the first time around. It waits for the second call and only then confirms External Power is off. I also find the checklist is very slow, especially after landing. I know it was your intention to slow it down analog to the A330, but with time I know what I am looking for and it just takes too long and breaks down the „flow“. After landing, especially on short taxis to the gate, I have sometimes reached the gate and its still going through the After Landing checklist. I really prefered the speed as it was …

On three flights so far I have had the problem that the Checklist hangs after Take Off. It doesn't make a call when passing 10'000ft and stays in the "After Takeoff" mode. I have checked off all the necesarry items and its not repeating any calls. In the attached screenshot I have been cruising for at least 20 minutes.

Hello sir, after updating A318/319/320/321 to version 1.4.2.0 i have some problem with checklist stuck at A318/319/320/321. (A330 is fine) Im not using GSX, so i have in GND SERVICES set GSX PUSHBACK to NO. BEFORE START checklist is going fine, after that there is two options - STAR PUSH or START. When i choose START, checklist went fine, but after that i dont have green information "START ENGINE 2" like it was in previous version. But doesnt matter, i have started ENGINE 2, after that there is information "ENGINE 2 is stabilized" and now green information "START ENGINE 1" works fine, after that there is "ENGINE 1 is stabilized" informa…

The checklist seems to be stuck on initiate taxi after built in push back is complete and the 'before taxi checklists' are completed. It doesn't seem to sense the taxi speed. A330 1.0.3.1 P3D 5.1 HF1 (5.1.12.26829)

Checklist A330 inactive Hello, I have owned the A330 with the P3dv4.5 since its release, but I flew it for the first time yesterday. Otherwise I prefer to fly short distance. All programs have the current status. The checklist function does not work for me, although pilot and co-pilot " ON " is activated, nothing happens. In the A320 I start the checklist function with the " 1 ", this is missing, also all fields in the A330 are light grey - inactive. Am I doing something wrong ? Thanks CFG874 Bernd Hallo, ich besitze seit Veröffentlichung den A330 mit dem P3dv4.5, bin ihn aber gestern das erste Mal geflogen. Fliege sonst lieber Kurzstrecke.…

Hello, I have installed the new NVDIA drivers as usual and no problems. But now the aircraft sound is still available. But the souns from the checklist is not hearable anymore? Only the message appears on the screen. Alos the command of the rudder movement during the checklist is not there. So no sound during the use of the checklist. All other aircaft sounds are fine. Any Idea?? Frans van Zantbeek

I had opened a post, but it was quickly dismissed as solved and caused by Fsuipc6! I still use the V4.5 HF3 with the latest Aerosoft updates of A320/321 andd A330. Whenever I call a notch of flap, either from the automatic checklist, or from the button assigned or directly with the mouse by the flap lever on the central pedestal, both the A320 and the A330 always insert full flaps. I have already tried to reinstall the latest version several times but without solution. In addition, I also noticed that when I completely retract the flaps, they never go completely to zero, am they remain in a middle state between 1 and 0, so I have to intervene again to bring the fla…

No approach checklist after goaround .No matter which airport. Problem not solved. Brgds Dieter Goaround.abx goaround.asc goaround.fms Goaround.fxml Goaround.pnl Goaround.wx

Hi, Is there a step by step guide for the A330?. Thanks Real Deraps

Always the same problem. After a successfully GOAROUND I get the info "Climb or continue for new approach" But afterwards I never receive the Approach Checklist and the Flight Crew became siilent. MfG Dieter

Hi, today I made a flight with A321 (Lufthansa) using checklists. Everithing was good since after takeoff. At this point the aircraft was climbing to the final FL but no checklist was working after "After Takeoff CL". I've finished my flight without CLs. I'm using Airbus professional experimental version on W10 64bit, P3D v4.5 HF3. Is there a "reset CL" option in order to restart checklists flow at the current flight phase? Thanks in advance, Alessandro

Gents, Is the checklist script ( from the FMC "checklists") available anywhere, as I need to memorize the actions, and I find already doing a two man job in the cockpit, and trying to read four columns in the EFB a bit too much for my old bones. If is could me made available in a text format for printing, then I shall be very happy ! rgds Carey

Airbus Pro A319 after GO AROUND I get the message CLIMB or NEW APPROACH. Up to this point everything works fine. Afterwards I don't get any further checklists. Brgds

Hi, yesterday i did a short ride from ENBR to ENVA using (as usual for me) ProATC-X. In flight plan the cruise flight level was 350 and I set this on MCDU. I was on CLIMB phase and everything with checklists was going fine. Before reaching FL350 ProATC (altitude was about 31000 feets) asked to descend to FL240. I did so but checklist was stuck on CLIMB phase so I did the rest of flight without CLs. Is it a normal behaviour or did I something wrong. I was not able to "reset" CL and start then BEFORE DESCENT one. I use P3D v4.5 HF3 and experimental version on Airbus Professional A320/A321. Thanks in advance, Alessandro

Gents, would like to point out some issues I'm having post the latest update With the checklists & copilot enabled, these items below are not being completed properly as they have in the past: after pushback, flaps are called to the setting in MCDU. Copilot audible confirms correct flap setting, but flaps are commanded to full. I have to manually adjust to intended setting. Repeatable on every flight after takeoff, flaps are called to be retracted. Copilot commands flaps retract. ECAM indicates '0', but flap position indicator (directly above '0') remains set. I have to manually push F6 to physically retract flaps. Repeatable on every flight …