Tools/Missions General

Hi just wondering I am bored up entering each waypoint any solution available?

Hi, I have a problem my AS updater have a problem, when I would open it, it's say it missing produckt folder or file. Can some help me, how can I fix this? Best Jammin16

Hello, I get the message, that P3D V5.2 HF1 cannot be found. However, it is installed as I can prove. Furthermore, Sim-Wings EDDM is not working. Can anybody tell me, where I can get support for that? Thans in advance

I have my throttle and yoke configured using the downloadable profiles from Aerosoft. My first attempts to use them, with the Aerosoft Twin Otter X extended, were a not very successful, as when I operated the brake pedals, on the C H rudder pedals, the throttles advanced proportionally to the pressure applied to the brakes. On checking the control allocations for both the throttles and rudder pedals both use the same axes. I am using the latest version of P3Dv4. Can anyone please help me to find a solution, as this is the first time I have managed to get the Honeycomb products to work in the sim, and fear it may be the same with my other add on aircraft? Do I also h…

Hi, After installing the latest Navigraph 2014, launching MSFS, the AIRAC shows correctly in content manager like normal, when checking the CDU it shows correctly the new 2014 cycle dates like previous cycles etc, then closing MSFS and launching FSFK to rebuild navigation database, looking at the progress bar at the bottom it goes through all the packages until it reaches navigraph-navdata where it hangs for 5 s or so then shows this error then after few seconds FSFK windows closes then FSFK relaunches by itself to default view... Is there something with the new AIRAC 2014 that FSFK won't do?

Hi there. I just installed configurator version 2.1 however every time I launch the tool it simply shows a grey box and I'm not able to get past that. I'm running Windows 10 and any help would be appreciated!

I have followed the instructions on set up for the aerosoft airbus A318-321, including axis and key assignments and ticking the box in the configurator.i have also calibrated by pushing the throttles forward and back . When I load up the Airbus the throttle fails to correspond to the climb indent or the idle indent , the only way to get it to the idle indent is to put the hardware to reverse thrust, so I don’t have any reverse thrust . How do I configure so it works please this is driving me insane!!! thanks Martin Littlemore

Hi! I can't update my airbus a320/21 pack. I bought it last week, it has some strange buggs tho, so i thought that i'd check that it is up to date - but when i run the aerosoft updater it says that i have neither of their products installed?! What do I do?

Hello I used FSC from 2012 and was very happy. Now i had to use a new drive and wnat to install it from my account but doesn't take it. Want to upgrade to 9.7 rev9 but no joy. Can you help me ? Frans Gehl

@mopperle : I can't believe what you have just said - it is hardly professional if I put a need for help, in the wrong forum and you being the professional that effectively simply says 'go away'.. Perhaps you don't take into account that it is a single airport that is not cheap to buy, yet doesn't seem to be able to point me in the right direction.

I have an issue here. I use Aerosoft Heathrow, and in the install (like many airports), it asks what runways you may are likely to use. I usually use without a problem, but now it ignores what run way you want. In this image, you can see that I want Takeoff North, Landing South. That used to work but it doesn't now at all - the aircraft come in randomly. If this not the right place to post, let me know where. Thanks

I have A320/A321 Pro running on P3D v4.5 which has been functioning well for the past year. Three weeks ago I launched the Aerosoft Updater and was informed v1.4.2 of the A320/A321 Pro was available. I therefore performed the update and the product launched within P3Dv4.5 with no problems. However a week later when I attempted to perform an actual flight I noticed the Nav Data had been switched to NavDataPro instead of using Navigraph data as I normally do. Went I attempted to run the A3xx Configurator to select Navigraph I received the following errors: Since I do not have the A330 a/c or the EFB option, Configurator can't find these…

when i buy the trustmaster tca , for the airbus pro , works this only/ exclusief for the airbus and not compatible for other addons? As iI own also the mjc dash ,aerosoft crj X and feel there ERJ V3 kind regards wil de boer

Hi, is there a guide on how to set this up? Ive installed the Honeycomb P3Dv5 software but even in that pressing buttons does nothing. In the sim all axis act like buttons instead of actual axis. I just cant get it to work at all. Any ideas? Works totally fine in MSFS. The Honeycomb Bridge DOES appear in add-ons.cfg Its been a while since I used P3D and that was V4, but im sure the configurator had profiles installed for planes, the new configurator only has default profile and I cannot even change any of the buttons. Im sure its user error but I cant find any documentation to help/.

Every time I attempt to use Aerosoft Updater my Malware software pops up telling me it's a Trojan. What's the problem here?

Hi Folks, Just having a problem with the Flight Data viewer..... The problem is outlined in red .....

Hi, please guide to where i can download the Livery Manager, thanks

Hi Guys, i’ve just bought the Ultimate Traffic Live for fsx but in the sim i cannot find any eurowings aircraft i can’t even find the old germanwings. But if i go on the UTL.exe Programm and when i’m looking into the status board, i can see that there are Eurowings aircrafts for example at Duesseldorf (EDDL) but in the sim not! please help me!!! best regards

I believe that others have had a problem with this as well, but their solutions (at least to me) weren't all too clear-- I hope someone who has previously had an issue with this can give me some insight. When trying to run WinchX.exe in P3D v4 I get an error: "This application could not be started because the side-by-side configuration is invalid, see the application event log for more information." In the exe.xml file, I have added: <Launch.Addon> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <Name>WinchX</Name> <Path>C:\Program Files\Lockheed Martin\Prepar3…

I buyed this software 5 days back when i am trying to install prepared v5 its showing this error(ERROR PICTURE ATTACHED BELOW) i am trying to contact to aerosoftt regarding this issue but there is no solution.i request you to kindly solve the issue immediately.

Current version for P3D V4/V5 is 3.3. When will you have this version available? Ruediger

I noticed that when updating scenes, your tool checks the date of the files and if any have been changed by a newer date(I often make changes to AFCAD for myself) then it does not change them, but reports that the update is successful and it will not be possible to update again and you have to do a complete reinstallation of the scene...😟 it seems to me it was logical to force update all files if the name matches🤗 Any ideas, suggestions?

Hello Gentz; I have looked through the forum to see if there an area to post this question but so far I do not see one yet. I have run into an interesting application called "Lufthansa Pilot & FO Avatars" and installed in my system but cannot find a more clear instructions on how to correctly employed on the splash screen as seen on the screen shot attached? The installation did came with a PDF of how to operate them at the key board but no clear instructions how to employ it in the splash screen with the a vehicle selected. Its there a video or PDF that will show how to totally employ it??. The video available on youtube does not cover those details. …

I’ve bought a new PC, a fresh installation FSX and the FSC 10. but it won’t work. What am I doing wrong?

Hi, I just learned on the the FS2crew-site that there is an update (v. 4.1) for the a330 pro. As I purchased this tool on your site I have to download it directly from here. Please tell your product manager about this change. Thank you in advance. cheers Bernd Schwarz