Tools/Missions General

Hello all of you Is it a kind of sound test in FSFK ? I am a "ex" new user and during my flights i have the impression i don't hear the differents sounds, ambience, voices, etc .... Thanks for your help Patrick

Hi everyone, I need some help with a problem with Super Traffic Board. I installed the progroamm without any problems. When I started the FSX and STB3, I saw that the default traffic (Pacifica, Orbit, Landmark,...) is visibel at the timetable (have a look at the picture down). Does anybody know to fix this problem? Much greetings for answers! Martin

Hello, I'm having a problem with the traffic lights on my p3d v4.1 and I can not seem to solve it. I've done everything and nothing! They are square, as shown in the picture. I was grateful that someone gave me a tip to try to solve the problem. Thank you very much in advance. Jorge

Hello All, Im using for a while now FSFK and Active Sky Next. Both programs work fine but Im always unable to download the weather to FSFK. As you can see in the attached screenshot I went to options and selected in the weather mode tab Active Sky X and (I think) I selected the correct folder from where to get the weather. In this weather folder there is a file where FSFK should see the current weather. I have also attached two screenshots from my current version of FSFK and FSUIPC. I was hoing someone could help me a bit to solve this issue? Thanks in advance Ray

FSC 9.7 Build 26 July 2017 I have all my paths set up correctly in FSC, yet I always get this "error in writing pmdg plan (9)" error when trying to save with the PMDG box ticked. The dialog box says that PMDG will read from the default P3D folder for routes - but that isn't true. In P3dV4.1, PMDG flight plans are stored in [...]\Prepar3D v4\PMDG\FLIGHTPLANS or [...]\Prepar3D v4\PMDG\FLIGHTPLANS\NGX. Also, PMDG plans are in RTE format - which FSC no longer seems to create (possibly because of the above error) <??>. HELP!! Adam.

Hello, I downloaded the trail version of FSMap, got a trial key and made sure it connects to P3Dv4. It does. Then I ordered FSMap from your shop, got a serial number which allowed me to get the final key for FSMap. Deinstalled trial version (cleaned registry, restartet PC) installed FSMap, inserted registration information (did that more that once!). Got FSMap running fine. BUT it only shows maps of Austria and part of Germany, like in the trial version, no matter what I do. Interesting: I can import maps of France but it does not show the maps that came with the paid software. Thomas Molitor, the developer, has abandoned the project a long time ago, his websi…

Hi I would like to ask the following concerning My traffic 2013 I am running My Traffic Manager see the attachment I press on Download and it asks me for username and password I am giving the username and password witch I am using to enter to my account on aerosoft but it is not accepted any ideas?? Thank you Pericles

I have installed new Flight Commander 9.7 for Prepar3D V4..... I can not get data manager to work I am send u jpg file .... my p3d v4 is on the storage D and the p3d v3 is on the ssd oper system drive C Thank You for your help E Dean

I posted a comment a while back regarding FSC and its lack of ability to save CRJ flightplans A moderator or staff member replied saying that they were testing a new version/update of FSC that has the ability to create and save CRJ plans For some reason I cant find that thread, however Im doing a follow up and asking how that update is going to save CRJ plans ? Could someone please elaborate on the progress of this noting P3Dv4.1 is out, can someone confirm that its in the works to include this ability in the next patch for v4.1?

Hi After installing my "2013 traffic" FSX does not detect it, there are only default GAs, I have my "traffic" folder in the FSX directory and in the scenery base but I do not know why it does not work, knows someone to solve this problem, I have FSX: SE and a few days ago I was doing FSX uninstallation and all the addons

hi I am having a big problem trying to use the database manager for the updated flightsim commander 9.7.1 on my slave pc ,I have placed a copy of my scenery.cfg file from the program data folder and renamed it to scenerycfg.fsc and placed this into the prepar 3dv4 installation folder on my client pc(Figure 0) of which databasemanager cannot find the scenery library (Figure 1) .Also I have copied the program FSCP3DCFG_V4.EXE to the same installation folder(Figure 2) tried executing and I get (Figure 3)displayed any help would be greatly appreciated. Richard sankey

Hi, I utilize the FS2 Crew 2012/RAAS Professional Steam FSX when flying the Aerosoft Airbus 320/21. Is this the latest version? Is there a product that you recommend other than this application? Thanks!

Gentlemen, at the moment, I am using FSbuild for my flight planning needs. FSBuild is not the most modern program and doesn't export to AS Airbus. The user Interface is pretty basic and can be a little tough to get around. I have been looking at Aerosoft's store website and caught my eye on FlightSim Commander 9.x and PFPX. I played around with the demo version of FSC from Volker's website and was impressed. I haven't seen the same for PFPX, thus I have a few questions. 1)Essentially, what is the difference between Aerosoft's version of FSC and that available on FSCommader.com? 2)As for capabilities, what advantages does PFPX give the user…

Hello, I try to update the database manager of FS command but it is impossible, it looks like it misses a file. an idea? update airport from prep 3 d does not highlight (bottom right) sorry for my English Thank you!

Ich habe die o.a. Texturen gekauft, kann die Zip-Datei aber nicht entpacken, weil bei rextd6.cab nach einem Passwort gefragt wird. mit freundl. Gruß

When I load my JustFlight Piper Warrior II aircraft into the Prepar3D v3 Simulator, with my everyday, never-failing, ChasePlane software, it doen't want to remember the countless times I've reinput the various camera angles! It lists the JustFlight aircraft, but it has no camera angles/series. I have my Flight1 GTN750 installed, but I've got a lot of other makes of aircraft with GTN750s installed too; and they work fine. It's just the "JustFlight" aircraft that doesn't want to conform. Is there an update/patch that fixes this problem? I couldn't find anyone else in your FAQ section with an answer. If I click the little curled arrow at the bottom (for finding similar…

Hi there! I recently got African Airstrip Adventures. I've installed it (FSX SP2+accel / W7 64 ultimate). I loaded the mission, saw the introducing video, and flew the initiation flight without problem. After that I've "switched" the aircrafts using the procedure explained here http://forum.aerosoft.com/index.php?/topic/26895-aaa-tipstricks/ I've set Carenado C208, Dodosim 206, Carenado C185 and PMDG JS41. I've made no error, and there's no duplicate immatriculation error message when I open FSX. The problem is: after the initiation flight, I park the Caravan at HQ, stop all, the I save the career using the appropriate saved mission ("AAA career...."…

Hi I have a similar problem as the other topic but despite logging off, clearing cache and downloading from all 3 servers I do not get version 4. I access via the old downloads order if that is relevant. thanks Peter

Hallo, ich wollte heute meinen Throttle Quadrant auf den neuesten Treiber bringen. Habe den Treiber installiert. Nun wird jedoch mein Throttle Quadrant nicht von meinem Pc erkannt und in dem Fenster zur Programmierung wird mein Treiber ebenfalls nicht erkannt. Hat irgendjemand eine Idee? MFG Josias Horn

I have the key to start the FSC installation, because I bought it on this site. After installed fiaca request to register and I do not have a serial. How to proceed?

Hello everybody, After seeing a picture of a great night lighting in P3D v4 around the airport of Frankfurt Professional, I wonder why my night lighting with Orbx Global, Orbx Vector and OpenLC Europe/OpenLC North America is so yellow, far too bright and why the lights are so big despite the fact that I have set them to "very small" in the light configurator. Is there a way to get them more white and decent as they look on Orbx' website? Thank you for your help. Regards, Daniel

As an owner of STB v3 for P3D v3 I understood that STB for v4 is a free upgrade. But I don't see it in my account. The newest version for P3D v3 is available but now the one for v4. Thanks, Ivan

Hello, REX Simulations has released the free update for REX4 Texture Direct users. I bought this product in the store of Aerosoft but to day I have verified that it is not yet available that update in my files of download. Would it be possible to know if the update to REX4 Texture Direct Enhanced Edition will be available soon? Thank you very much

Hallo, das Update ist bei mir völlig daneben gegangen. Vor dem Update funktionierte die letzte Version 9.6 Rev. 9 problemlos als registrierte Version (regelmäßig upgedated von der Aerosoft DVD-Version 9.0.0.2). Entsprechend vorliegender Instruktionen auf der FSC Homepage habe ich folgende Version von der Aerosoft Support-Seite heruntergeladen (AS_FSC_FSX-FS9-P3D-FSXSTEAM.zip, vorgesehen für das update der DVD-Version) und anschl. als Administrator ausgeführt (Virenprogramm abgeschaltet). Nach dem Start der Installation wurde die Deinstallation der vorhandenen Version eingefordert und mittels der Systemsteuerung auch durchgeführt. Bei der erneuten Installation wurde d…

As most new flight sim enthusiasts, Whenever I takeoff or land, I like to critique how well I did on my takeoff roll and landing. (I also like watching the mighty 777 takeoff) however it sucks whenever I use the internal P3D replay system because the plane moves but it stays the same as to where I left it. For example, when I takeoff and put the landing gear up, on the replay the landing gear will be up, so the takeoff is just a floating 777. Also, none of the animations work (thrust reversers, spoilers, spinning fan on the engines) and it is not as pleasing to watch. Is there any other replay program I can use, or is there a fix for this. Thanks in advance fo…