General questions and discussions regarding Controllers

hello I tried like some other users to launch the honeycomb configurator i get this error: Failed to initialize SimConnect to the line didn't come accross any solutions bu now and i really would like to customize my led on the bravo quadrant for example: that the nav led will light when nav mode ( GPS ) is engaged

Hi. I have an issue which has been frustrating me for a while. I have emailed Microsoft and have not had much meaningful support so thought I would come and try my luck here. I fly in the HR Reverb G2 and mid flight when I access the in game panel and open up a window such as the VFR map, my throttle levers stop responding in game. If I click outside the window sometimes they start to work again or if I close the window, they will eventually start to respond. This is so frustrating. Does anyone know if this is a known issue or if you can provide me with some suggestions, I would be much appreciative. …

Dear community, i just bought the Honeycomb Bravo Throttle and i was doing some tests with the CRJs all working fine except the altitude knob plus and minus. This is not responding. Is there any workaround for this problem? Thanks in advance!

Hello, und moin, is there any affordable overhead panel (VRInsight, FlightSimPM, etc.) working with the CRJ actually? Further has anyone managed to get any overhead linked (even the bigger ones CPFlight, Opencockpits, etc.) without PM or Prosim? I'm just building up my full style B737 homecockpit and am looking for an overhead panel to be used with upcoming PMDG 737 <- but I would also use it for the CRJ and (if possible) Twotter Looking forward to your informations Best regards Christian

I located a profile here that correctly set many (not all) of the other Bravo controls (and got the lights working), but, after mucking-around with the current Honeycomb Configurator for the past two weeks—doing little beyond completely mucking everything up and having to repeatedly start over, I'm completely confused and frustrated. Primarily, I just want to figure out how to use the Bravo's second, third and fourth throttle levers as throttle, prop and mix for the A2A Bonanza in FSX/Acceleration. I've spent the past two days searching through the forums, but most of the answers either reference the 2020 version of Flight Simulator or just refer people to the curren…

I've noticed after a few iterations of MSFS as well as my reinstalls that when honeycomb software is installs, it overwrites the exe.xml and obliterates whatever else was in there: FSUIPC and realsimgear interface. Once this happens, it is very difficult, from a user standpoint, to rebuild the exe.xml so that everything works. Here's what I've rebuilt, but I'm not sure it will allow both components to work unfortunately. <?xml version="1.0" encoding="Windows-1252"?> <SimBase.Document Type="Launch" version="1,0"> <Descr>Launch</Descr> <Filename>EXE.xml</Filename> <Disabled>False</Disabled> &…

I've had my Bravo Quadrant for about a month now and use it with MSFS 2020. I have downloaded and successfully installed the LED option and it works great! I also resolved the issue with the error on startup by downloading and installing the Visual C++ 2015-2019 redistributable. The one thing I have been unable to resolve are the default switch assignments that it is setup with in MSFS 2020. They are setup out of the box as follows: 34/35 - Beacon Light 36/37 - Landing Lights 38/39 - Taxi Lights 40/41 - Navigation Lights 42/43 - Strobe Lights 44/45 - Pitot Heat 46/47 - Avionics Master Out of the above the Landing Light…

I just purchased the PMDG DC-6 for MSFS 2020 and I am looking for anyway to configure my Alpha and Bravo to use it with this aircraft? I know the 737 is also coming so I am sure this will be a big topic. I have it working perfect with other aircraft within MSFS 2020 but the DC-6 is a different animal.

Flying MSFS 2020. Tried with Beechcraft Baron and the Cessna 172 with G1000 loaded. Using Honeycomb Yoke amd Honeycomb Throttle Quadrant. Either soon after take-off or after a while setting up on the ground the Avionics displays turnoff and seem to have no power to them. When initially started the AMPS reading seems to be negative 146 AMPS! All other flying controls seem to work OK. Alternator appears on, BUS 1 and 2 on. Thinking there is either a conflict between MSFS and Yoke switches, or software corruption? Any ideas experts?

Dear community, I have bought the 'Bravo throttle quadrant' and would like to use it. In x-plane all went well :-). In MS FS 2020 going to the controllers the 'Standard' profile is completely empty. I do not think it is normal, I presume. Can someone please send me a standard profile and / or give me some hints where to copy that file? Thank you and kind regards. SM

Hi guys, I have a hard time making the switch (NAV LIGHTS) to work with a physical switch via Mobiflight wasm events I see the event in the list, but cannot manage to get it work. I test the Master Warn Button, its ok.

From one day to the next the Spoilers axis stopped responding to me in the BTQ, I have the A320 Professional profile installed, but this axis is not programmed, I had it programmed with the P3D 4.5 axes and it worked well, I don't know what happened. soon stopped responding. If anyone can help me solve it I would appreciate it. Jose Bieletto

I'd like to get a view of the captain's controls on the left (wiper, baro and such) without the yoke in the way. Is there any way to pull that off? I know I can hit the nametag to lower the yoke, but I can't do that zoomed into those panels and scrolling back and forth costs time. Thanks!

Received the Bravo yesterday and flying is now so much more fun Today i figured out that there seems a bug when i use the AFC Bridge. When it is loaded the TBM will shut down the Engine every few minutes by itself. I then disabled the bridge via Taskmanager and after that the Engine stayed on for the entire flight. Don't know if it's the same with the stock TBM, because i use the TBM Improvement Mod by Mugz

Good evening to one and all. A complete newbie to the Honeycomb range and having taken delivery of the quad throttle today, I have been trying to understand the config route for various aircraft I intend to fly. I wont be interested in the 4 engine option, but primarily twin engine varieties from CRJ to Air King and Brittany. Does anyone have a generic profile that I could import into MSFS 2020 to save time ? Or is it simply a case of plug, play and adapt as I go. Thanks in advance. Chris

Since the mandatory update I cannot use Bravo AP function correctly. For example I cannot use the VS selector button to set my vertical climb speed - won't react. I verified button 20 is set in the profile. I also notice that the AFC Bridge is missing from my community folder. I tried reinstalling the Honeycomb support software but the install fails because it cannot find a .cfg folder. I use AP a lot and I cannot use it. Please help me.

Hi all, I just wanted to see if anybody else who just received their BTQs have the same issues. Unfortunately i have seen this now with two units in the course of two weeks (one purchased locally and one received yesterday directly from Aerosoft). The later one has it across multiple axis levers. What happens is that some of my bravo throttle axis jitter when doing fine movements around the center position (50% of thrust). This is especially noticeable on the middle axis levers and visible in the cockpit itself which is quite annoying when you see the thrust levers jitter in the cockpit. This is how it looks in Spad.Next for example: h…

I received today the Bravo Trottle. Installed everything, connected to the Sim and only Throttle are not working. Mixture is OK, Propeller is OK, Throttle 1 start from 0 but at half way jump to 100%, Throttle 2 give no power up to 50% of the way then go progressively to 100%. Trayed every calibration as suggested in the forum but seem to be an HARDWARE PROBLEM of the Bravo. Leds not working too. Trayed with default planes and with Seminole. Please tell me what I have to do. Thank you. Vincenzo Lofaro

Previously, the Bravo worked fine with the DC-6, using a profile that I set up for mostly just the throttles, with the spoiler axis as the propeller control (the DC-6 has only one prop lever for all 4 engines). I had to send the Bravo back to Honeycomb last month for a replacement (which they very quickly provided, good on them!) due to a broken wire in one of the thrust reverser connections. The new one worked fine when I first installed it, but today it is all messed up, possibly as a result of one or the other of the recent updates from MS/Asobo that appear to be wreaking havoc all over the simulation world. Specifically: - The throttles are all way out of …

I’ve had the honeycomb bravo since release, had all the lights working and everything configured for various planes. For some reason now, when I start cold and dark OR starting powered up at a gate my lights on the device don’t come on. If I start powered on at the runway lights come on fine. Not sure what I’m missing or doing wrong.

Hello everyone. Does anyone know if finally the products of vrinsight cdu ii and combo fcu for airbus will be compatible with the fs2020 or did we finally invest unfairly? Thank you very much Lefteris

Hi all, I'm unable to install the honeycomb bravo configuration prog. for the Microsoft FSX. The flightsim software is not installed on the standard "C" disk due to lack of space. The location is on my D-drive. In my D-drive i found the "hidden" and protected folder and the Microsoft Flightsim. I referred the installer to this location but given the write protection it is not possible. Any other location will not be accepted by the program. Any idea how to proceed? Thanks

Hi There! i have saitek multipanel autopilot. When I switch gear down before landing on crj autopilot is off too with g/d. And i need to switch on AP. dont understand why… Could You please give me advise? thx

Hi There, I am having an issue with the Honeycomb throttle quadrant on Microsoft Flight simulator, where the throttle will only be at 50% or 100% it won't go anywhere in-between when I adjust the throttle on the quadrant. It works fine on all the other flight sims it just seems to be an issue on Microsoft Flight Simulator. Any suggestions would be much appreciated.

Hi, I purchased the Bravo and it finally arrived. When I try to install software update 2100. I get the messages that are attached. After seeing that it is required in other posts I attach my xml file. Thanks in advance exe.xml