General information (no support)

Hi, as the Airbus Professional was, at the beginning, also for FSX, I would like to know if you still expect to release an update or a new Airbus ? If the info is on another topic, feel free to just post the link :) Thanks !

So when I go into avatar mode in P3d V3, I can't get closer to the Aerosoft A318/19/20/21. It stops me and yet the avatar continues to run, is there a solution to this? Thanks

When saving the flight and the computer is turned off, everything except the configuration and flight plan in the right MCDU is saved. I would like to know if this is so, or do something that I do not know. How you can save the entire flight, including all the parameters entered in the MCDU when you do not have time to finish it and you have to start at another time?. Another question, this version is compatible with Prepar3d.v4

I Know here is maybe The wrong Place do Talk about all My Problems with my recent buy. To start with: The Aircrafts are not there when i Start FSX. and not to find the models in the Aircraft folder, they arejust in that strange DLC Folder,... and my problem is,... when i copy the DLC folder in to my FSX/steam folder FSX crashes when i start the aircraft. Is there any method to get that product running i thing i almost tried everything possible. 😕 Im at a point that i wished i didn't buy that product via steam, that was a fealure i just make once. 😕 Thanks for Help LG Ines

I know you guys probably get this question a lot but will the Airbus A320/A321 be ported over to P3Dv4?

I can change between selected and managed modes only on the FCU. I absolutely cannot change, for example a heading or an altitude etc. Please can anyone help?

I am getting a new computer and transferring my FSX including Aerosoft aircraft to the new computer. Do I have to do anything to transfer the license?

Having issues. When the flight loads up the cockpit is cold and dark. I try to get electrics to fire up and start APU but it wont start. Can someone give me a quick run down on what to do and to get the MFD up and running? Thanks Darren

I would like to know the rudder and axle controls of A320. I have already searched everywhere but i couldnt find it in freeware aircraft it is NUMPAD 0 AND ENTER but in Aerosoft A320 its not working i already tried many time please help me to find out the rudder and axle control of airbus a318.a319,a320 and a321

What is mine problem help me please :((( I check all topics about that but I could not find any answer on my problem

Hello all, I purchased the DLC Aerosoft A320/321 package from steam today I have installed the plane, everything seemed really well, I then loaded up my FSX SE from my toolbar as i normally do, then loaded the A320 which loaded however, it takes ages to move around the cockpit it's un-usable at the moment i have no other issue with any other add on aircraft just this one, my machine is good could aerosoft please send me a step by step resolve for this problem. Or anyone else who has overcame this issue. I have gone as far to try each of the variants from the installed aerosoft planes all have the issue. Package details: Aerosoft DLC FSX Steam Edition…

It complains about that SharedConfig again and as you know. The Steam Edition already is 1.31. So please fix. The Plane does not work properly without this it seems.

My Windows 10 PC has stopped printing any Aerosoft Airbus Manuals. The Manuals will open but are now marked secured. It is not a fault with my printer. I have tried signing in to Adobe but that made no difference. Does anyone know how to Un-Secure the PDFs please. (Adobe are not much help). Thank you for reading this.

Hi. I have a question. I was planning on downloading the Aerosoft Airbus X IAE sound enhancement, but I noticed it was no longer on media fire. Did you guys move it somewhere else or did media fire just drop it?

Good Morning All, I have just purchased the A32x set - what a machine, I am just getting to grips with the aircraft, ensuring I have all the correct assignments etc - however I am struggling with ground steering the aircraft currently - my setup is P3D V4, Saitek Flight Yoke and Pedals. The rudder works fine during take off and in-flight - but while I am on the ground, I don't have any steering at all - its almost like the steering pin is still in - but I can't see a way to remove it, if it is! Am I missing something? Thanks

** Moved to Correct Forum ** Hi All, I was flying the A320 yesterday out of Prague, and I was offered the Stat Checklist and Taxi checklist - then all the checklists went blank and I had no more for the rest of the flight. I've seen multiple issues with the checklists being grey at different parts of the flight - is there any way to re-enable them without quitting the flight? Thanks

Hi All, Absolutely LOVING the A320, it's flying like a dream - however I noticed today in one of my outside shots, that the flaps are not showing extended externally, where as inside, they are showing as deployed. Is there an issue with modelling the extended flaps? Running P3Dv4.4 Thanks

Hello! I installed v3 of EZDok after upgrading to it in my installation of FSX:SE. Once I did, started the sim and selected an A320 aircraft I noted that two of the "view system" pullout choices had been "hijacked" by EZDok to display certain camera views. Struggling with how to change these wasn't proving fruitful so I removed the EZDok installation and restarted the PC. After restarting FSX:SE and reselecting the Airbus I note that the two "view system" choices are still linked to EZDok views although it is no longer installed. I'm guessing that those selections are buried in a .cfg file somewhere and am wondering what the best way is to reset them to Aerosoft's or…

Hello, There's a problem with the MCDU A320 pro. Inserting a flightplan make troubles. The waypoints do not come in order but are mixed up when I insert a following waypoint. Sometimes in order but vice-versa. The STAR is mostley or in the middle or in the start. What can be wrong with this? I hope for a solution. With regards Joop PC.

Hi, I am facing a new problem now. I recently bought a joystick without pedals and I use it to fly the Airbus. However, I noticed that when I am performing the After Start Checklist and come to the control check, I cannot move my rudders with my keyboard commends(even without the joystick and using mouse and keyboard only) when the fly-by-wire system is on. However, when I disconnect the Fly-by-wire system, I can move it freely. This also causing me lose the direction control when on ground and unable to use the rudders on final approach with the fly-by-wire system on. Any solutions for this?

I have just bought the Steam version of the Airbus. I am fairly new to flying airliners. I noticed that the step by step guide will not print out as it is password protected. I only have one small sreen and it is not really possible to have 2 widows displayed, one with FSX and one with the manual. So I am unable to access the manual practically without printing it. This is spoiling my enjoyment of the software. Does anyone know if there is a way to print out the maual, or if there is a printable version out there? Many thanks

Hi there I am sorry this is the first time to write In a forum I do not know whether this is the right place or not So my apology forgive me I used to play aerosoft airbus x on FSX it was amazing especially in config there was other settings where you can choose between several first officers voices But when i get upgraded feom FSX to P3dv4 I bought airbus professional But i could not find other settings tab in config So only 1 pilot voice and 1 female first officer voice I love and i used to use the British accent pilot and first officer Am i the only one who have this problem Or do all aerosoft airbus professional owners have the same issue? Thank you so…

Steam have advised me that updates to the A320/321 are now available, I bought my sim through Aerosoft and can't find any such updates. Can anybody assist?

Hi developer from aerosoft, is it possible the "Option MCDU" (MCDU 3) to show on the tablet via the A3XXX ConnectionPro? Airplane A 320/A321 professional. Greetings Martin 😊

Im sure this has been asked before... Will we have an NEO model soon? I havent used my system since I moved house 10 months ago, and im thinking on buying a new one but i dont really want to unless there is a NEO project on the horizon.