General information (no support)

Hi First, I just want to say I love this aircraft! I'm only learning, but I got a quite a way. The one thing I'm waiting for is a good video that shows a cold & dark startup with commentary! My big problem though, is looking around with my joystick hat. I'm afraid I don't have much hardware, and normally this is fine, but in this aircraft it is very slow! If I want to look left or right for example, it takes ages. It's easier to use the space bar +right mouse button, but I like the joystick hat as well. Why is it so slow to look around on this aircraft? Gaz

Good morning, I have a question, I fly usually the Project Airbus A319 in my FSX-SE. I Have a lot of addons in my FSX (GSX, FTX Global, Active Sky 2016, Ultimate Traffic Live, Pro ATC-X, REX Sky Force 3D, and many many Airports Aerosoft, FSDT, Justsim etc), so my PC (AMD overclocked to 4.2 GHZ) ist working at his limits. When I take off in EDDH (Addon Justsim) at a rainy day, so I have round about 15-20 FPS, at FL 320 50-70 FPS, landing in LSGG (Addon FSDT) 20-25 FPS with my Project Airbus A319. I would like to buy the Aerosoft Airbus. Does anybody have experience about the FPS-Impact of the Aerosoft Airbus in relation to the Project Airbus in FSX-SE? So …

I am getting ready to switch over to P3DV4. I see the CRJ and the twin otter can be used with P3DV4. Will the A321 work with it as well? I am going to buy the A321 but will only switch over if it is compatible. If not I will wait.

Hi I've just bought the A320/A321 and have checked that is in the FlightSim, and looks good. However, before I start training I have downloaded the British Airways livery (see below). I followed the instructions and tried to use the livery manager, but the livery does not appear alongside the other (out-of-the-box) Aerosoft A320s that ARE in there. So it's clear the main aircraft install worked, but not the downloaded livery. Looking in the file system in can see a number of aircraft.cfg files, and there's two SimObjects folders under the FSX folder: FSX\DLC\500201\SimObects\Airplanes\ (I can see that this folder contains 5 subfolders, one f…

I have P3Dv4 and Will there be a compatible patch or and update for the people the already have Aerosoft A318/A319/A320/A321 Bundle software why pay for it again like from P3Dv3 to P3Dv4

Hi, I have a compatibility problem with the airbus. The problem originates because before I used the FSX Steam edition and bought the Airbus A318 / A319 / and A320 / A321 family package and I would like to know if I can use this same package in the Prepar3d v4, someone knows if it can be done and how ?

When will the airbus A318/319 professional be ready

I am looking at option for purchase of aerosoft airbus . I have a query related to it . The system specs posted for a320/a321 in aerosoft shop and in steam shop both are different. So is there any difference between the. Two version ? Please find the link below Aerosoft airbus shop https://www.aerosoft.com/en/flight-simulation/flight-simulator-x-steam/aircraft/1054/airbus-a320/a321 Aerosoft airbus steam edition : https://store.steampowered.com/app/556212/FSX_Steam_Edition_Airbus_A320A321_AddOn/ Please advise on above at earliest as a sale is going on in steam edition which I would like to avail . Many thanks ,

Hi can someone help me ? i have PFPX & topcat to use for planning my flights. i tryed to look for the WEIGHT_AND_BALANCE in the Airbus CFG but i can't fine them. so pfpx & topcat work together with the Aerosoft Airbus, i can only fine this Operating empty weight 39,500 kg (87,100 lb)-Aerosoft A318=87100 Maximum zero-fuel weight (MZFW) 54,500 kg (120,200 lb) Maximum take-off weight (MTOW) 68,000 kg (150,000 lb)-Aerosoft A318=150000 Maximum landing weight (MLW) 57,500 kg (126,800 lb) Cargo capacity 21.2 m3 (750 cu ft) Fuel capacity 24,210 L (5,330 imp gal; 6,400 U…

Hi there On landing the airbus 319, when I am operate the thrust reverse by press the F2 sometimes it work and sometimes it dosn't. in replay (by chase plane camera) the thrust revers doors flipping on and off (open and close) and the engine sound is very low. from the cockpit it looks that the N1 Indicators work well (almost 90%) any kind of solution? regards Flc

Hi, How can I reduce the smoke tires on landing, in airbus 318/319 fsx se? is there any solution? regards Flc

Hi Quick question. On the a320, I can disengage autopilot by pressing z. How do I engage it after takeoff? The z key doesn't seem to work for engaging the autopilot. Thanks Gaz

Hi In RNAV GPS approach, the aircraft airbus319 arrived to the threshold and continue at 340 ft above the threshold can someone help me? Aviv1959

Someone posted this in this forum a few months ago, and it came about that there was a problem when you try to reload something that you saved - the panels all want to go back to their state that is the default state. Is there any update to this as it is a real pain when you're in training? If not, is there a go-around we ca use at the moment? Thanks, Gaz

Hi, Still new to this and having a great time with the a320, but I'm having a bit of an issue with knowing and setting the ILS frequency. When the standard ATC tells me what runway I'm landing at, I need to set the correct frequency and start preparing for landing. Can sometime either give me advice or tell me roughly where to look? I would really appreciate it. Thanks, Gaz

Afternoon all some of my A321 IAE aircraft I have downloaded wont rotate from the runway where as the CFM versions seem to work fine any ideas maybe I am doing something wrong

Hi I'm learning how to fly the A320, and I'm following the instructions given to me by the FSX ATC. I have found one of the problems is that I can't increase/decrease the altitude on the autopilot panel to 100 increments - they can only be done by 1000 increments. When I last landed in my training, I was told to approach the airport from 2300ft, and I had to do it from 3000ft because I couldn't set the altitude to anything but 3000 or 2000. Any help would be greatly appreciated. Great product, btw - I love it! Gary

Hi I'm finding a bit of a problem when I try to look outside the cockpit. I'm aware of the buttons in the top-left to get me around the cockpit, but when I use my joystick, I find it difficult to turn my head, and look out the side of the windows, my head turns really slow! Is there a way to speed it up, so I can turn my head faster? It's not a problem on other aircraft. Thanks Gaz

I have the Aerosoft Airbus and DA CRJ 700-900, and while awaiting the Airbus professional version release, had a question about the livery downloads. Is there an easier way to find a specific livery for an aircraft other than scrolling through numerous pages of aircraft, panels, sounds, profiles that have been uploaded? For example, I want to search for Air Canada liveries for the Airbus series. It appears liveries are dumped into the downloads in no particular order that I could figure out. Is there a way to search for a specific airline livery, without having to go through a lot of pages to find it? It might also be helpful to have …

I downloaded an Airbus 320/321 but I can not turn on or better to brighten the navigation screen. Could you help me?! Thank you

I didn't know where else to post this. Does anyone else have problems with the Aerosoft A318/319/320/321 series with FSX on Windows 10 machines? Mine starts out OK, but after a few hours the graphics start going white-out. Then my flight controller stops working. I have renamed the fsx.cfg file in the %APPDATA% folder and let FSX repopulate it. I don't know what else to do. It's a lot of money to just deal with such crashes!

Sorry, for my English. I have noticed in my Airbus that the panels in the cockpit are serrated where you can not see well just by focusing very closely. I have the NvidiaInspector and I do not know how to solve it. Use FSX-SP2, Windows7. Can you give me a tip please. (on the outside everything is OK). João Peralta

Hello I was looking for an airbus a320 but i'm confused with all the versions evolution, extended.. what version do you recommend?

Just installed the AirbusX Extended bundle and the fuel planner won't launch,says "stopped working looking for a solution" .The AS Recorder Manager won't launch too,says "we are sorry,but you might have found a bug.Error message:attempted to read or write protected memory,this is often an indication that other memory is corrupt" Previously I installed the Falcon but the displays were black,only the HUD was on.,,,any help especially about the fuel planner would be great Ian

Hi, I'm using p3d v4. There is a problem with the top-down view. The view is in the aircraft's belly and doesn't show the original view of the overview of the particular area the aircraft is in. Could you please help me on how to fix this issue. Since it's hard to navigate or look around the area without it. Thank you.