Tools/Missions General

Hallo, das Update ist bei mir völlig daneben gegangen. Vor dem Update funktionierte die letzte Version 9.6 Rev. 9 problemlos als registrierte Version (regelmäßig upgedated von der Aerosoft DVD-Version 9.0.0.2). Entsprechend vorliegender Instruktionen auf der FSC Homepage habe ich folgende Version von der Aerosoft Support-Seite heruntergeladen (AS_FSC_FSX-FS9-P3D-FSXSTEAM.zip, vorgesehen für das update der DVD-Version) und anschl. als Administrator ausgeführt (Virenprogramm abgeschaltet). Nach dem Start der Installation wurde die Deinstallation der vorhandenen Version eingefordert und mittels der Systemsteuerung auch durchgeführt. Bei der erneuten Installation wurde d…

As most new flight sim enthusiasts, Whenever I takeoff or land, I like to critique how well I did on my takeoff roll and landing. (I also like watching the mighty 777 takeoff) however it sucks whenever I use the internal P3D replay system because the plane moves but it stays the same as to where I left it. For example, when I takeoff and put the landing gear up, on the replay the landing gear will be up, so the takeoff is just a floating 777. Also, none of the animations work (thrust reversers, spoilers, spinning fan on the engines) and it is not as pleasing to watch. Is there any other replay program I can use, or is there a fix for this. Thanks in advance fo…

Hi, Have got the latest Nav Data Pro Database in FS Commander and my Airbus Bundle. I have created two Flights in FSC and they work perfectly on the Airbus. I did a Flight from Manchester to Zurich in FSC and loaded it into the Airbus FMS. I checked the Plan and it was OK with no discontinuity Got nearly to Zurich and a Kink like a triangle appeared which was not there before. The Aircraft turned away from the Plan about 70 degrees back to try and follow the kink when the next bit off the kink appeared it did not turn back but ignored it an went straight on. I could not get back on the original plan whatever I did. Does this happen often when a perfect and checked F…

Ich verwende eine P3D Version 3 zusammen mit dem A320 und Aivlasoft EFB Die erstellten Flupläne funktionieren innerhalb Europa mehr oder weniger gut. Nun mein Problem: Mein Flugplan von OMAA (Abu Dhabi) nach OMDB ILS Rwy 30R (Dubai) sieht im EFB vernünftg aus: OMAA, MIADA, OSTIN, LOVOL, LADGA, IDBR4, OMDB leider kommt nicht alles im Austauschformat zum flp Format an bzw. wird nicht interpretiert: [CoRte] ArptDep=OMAA ArptArr=OMDB RwyDep= RwyArr= RwyArrFINAL=ILS30R SID= STAR= APPR_Trans=OSTIN Airway1= Airway1FROM= Airway1TO= DctWpt2=MIADA DctWpt2Coordinates=24.85333,54.96000 Der Anflug endet einfach auf dem OMDB locator…

Hi, I have just been to FS Commander's Website and it says you cannot use their full product with Aerosoft. You need apparently to buy it from Aerosoft. As I have several Aerosoft Airports and the Airbus Bundle in FSX Steam Version. I am slightly confused by this. Are they different products? Kind regards James.

Hallo, ich wollte mal fragen wie man bei Super Traffic Board bei seinen eigenen Flug auf Boarding State stellen kann. Da dort wenn ich für Boarding so gesehen eigentlich alles ausgeschaltet habe steht bei Remarks immer ''Final call'' Am besten sagen was alles an sein oder aus sein muss habe den Airbus X Freue mich über Rückmeldung LG Sascha

Hallo, ich habe mir gestern um 23 Uhr bei Aerosoft das Tool Super Traffic Board gekauft. Nun steht da allerdings seit gestern Bestellung wurde noch nicht bearbeitet. Meine Frage wie lange dauert die Bearbeitung ? LG Sascha

Hi, I purchased a DVD copy of Aerosoft's Flight Operation Center a while back, although I haven't even had time to install it yet. I have been getting in to much more tubeliner flying lately, and have updated aircraft databases and P3Ds nav database, so I was just wondering if I can do the same with Flight Operation Center? Does anyone know if and how I can update the database of FOC to AIRAC 1706, which is what I have just updated everything else to? Cheers,

I have a question on the performance table in TOPCAT you get by pressing the 'Compute' button after entering all other data such as weights, fuel on board etc. More specifically I'm wondering how to use the flex (assumed) temp in a realistic way? This since there are a number of temps to choose from where the higher the temp, the shorter the runway margin. Is it simply up to the captain to decide and based on what? Reading the manual it says it's airline specific but I guess most big airlines operating 737-800's (which is what I fly in P3D) use a similar approach to this. Anyone who knows more about this and I'm particularly interested …

Hello together, First of all, my Account on the FsDreamteam forum hasn't been accepted yet but I need support now. When I install GSX and open P3D v3, the Addon Manager and coutl and GSX itself don't appear there. I have the latest installer, have the Antivirus and Windows Defender turned off.l Also I have all the Microsoft Runtimes and .net frameworks reinstalled. I have reinstalled GSX itself a couple times and have restartet my PC too. I looked through the Fsdreamteam forum and Youtube videos, without brining me any solution. Do you guys know anything I can still do? Greetings, Lennart

I recently bought the airbus extended but i did not get the fuel planer or flight planer with it so i can't fly flight plans

Hi, can someone upload the link for v1 callout in aerosoft airbus? Cheers!

Hi, I would like to know if you can use PFPX, also Aerosoft Professional Flight Planner X for fsx steam

To whom it may concern. My name is Frank and purchased Professional Flight Planner X from Aerosoft store and the transaction froze and left my browser hanging for well over 20 minutes. I logged into my bank and found that the transaction had been successful but no confirmation email was sent from aerosoft confirming the purchase. Hence unable to obtain an order number. I decided to open a ticked with support. After hours of waiting for a reply I finally received an email from support and was told to order the product again and select 'press copy' and add in the comment that it was approved by Andreas so that a copy can be unlocked for me. I did as instructed immediately. …

Hi...The giraffes are walking in place and not moving around the area...Do I need SDK installed for them to walk around?

I have downloaded and installed FS Map in FS2004. Everything is working ok but there is no map showing in fs map in the aircraft. Any help would be much appreciated regards Brian

Hi all, I need some help here. Recently I purchased Spad Next to use it with my saitek switch and multi panel for the Airbus Extended. The problem is that the in-game menu of FSX doesn't show the Spad Next add-on! I'm not able to use my saitek panels, they don't work...only some buttons of switch panel work. The weird fact is that with other aircraft like PMD* NG* spad next works perfectly well! Also without the Spad Next add-on in the in-game Fsx menu. It's really strange...Could you please someone help me? I'm desperate! I spent 4 hours yesterday to find out the solution, with no results! I also tried to insert manually the "launch add-on" string into the dl…

Hi all, in Aivlasofts EFB I get now an error-box every time I open the approach page stating "Could not draw the profile view procedure XYZ bedause of elements count <2" It never happend before 8-( Any idea what could have happened? Cheers, Heinz-Peter

The 1st MCDU opens up to the Aircraft Information. It lists the engine types and such, and on the same page, it lists the first and second Nav Data Base. For people without my problem, it would display 1511, the default AIRAC data the Aerosoft A320 came with, and your main nav database would be 1703 or 1704, the updated one. There's one problem. Both slots don't display either database. It is just blank. I've tried restarting the sim, restarting my computer and I don't know if I want to reinstall the plane just yet. Operating System: Windows 10 Simulator: FSX:SE

Very little traffic at big airports any help? thanks oliver

Hello all, For some reason my aerosoft launcher did not update correctly. The menu is all messed up and it doesn't show any new news or photos. Can you help me with this problem? Check out my attached file and let me know please.

I just bought and installed Lukla X and it's Mission package a few days ago. Today I flew the Mi-8 Helo rescue mission using the Caravan. The mission went quite well; however when I reached the rescue site there was no MI-8 to be found. I flew over the area for an extended period. I'm thinking that perhaps there is an FSX setting that needs changing or that my Mission package may be missing something, etc. Any tips will be appreciated. Thank you, Ken

Well guys, After a very long time i decided to install FSX again ( after 8 years hahaha) and as expected I got my first error. Other then FS9, I need too activate some airports in FSX trough the Aerosoft Launcher. I put in the credentials hit the activate online button and it's a winner, my Aerosoft Launcher crash each time. Maybe some of the FSX users can help me with this. I made an image of it. Regards and thanks

Hello ! I use FS9 Commander ver 9,6 with P3D ver 3,4,22 and got problem finding the database path ? Used FS9 Commander before under P3D ver 3,1 with no problems. Unfortunaly I needed a complete new installation of my P3D thats why ver 3,4,22 Under install FS9 Commander the installer can't find a simulator but I can choose it under path finding to my sim but I cant find the scenery path. My P3D install is in the D: My FS9 Commander in the c: Any help would be presiated. Regards Carsten

Hi, Before we begin, I would like to state that my geographic expertise of Kenya is lacking, though ti is not based entirely on AAA's map, and furthermore I understand that a simulation is precisely that, and that a mission map within an adventure depicted in a simulation is perhaps never going to be enriched with absolutes. Thus, I may be entirely wrong, and since I am quite tired of searching for an answer, I felt the need to refer to the experts, this being Aerosoft who brought the product to market. The broadly generalised airfield map that is provided with AAA shows Laikipia Air Force Base HK0G and Nanyuki HKNY to be two separate airstrips, an…