Systems

The current profiles for the CRJ are excellent. I would like to bind a button (on the Alpha) to toggle the VNAV switch on the console. It seems like it needs more than one variable. Has any one determined the variables and values needed? Thanks!

Good evening, I have a problem: every time I try to use an ILS approach, when I push APR, my plane turn to course 360, and this, whatever I choose FMS or VOR/ILS as nav source. Everything works well EXCEPT the APR! (the same approcach works well with airbuses (A318-19-20-21 and 330). I have uninstalled/reinstalled the plane 2 times (with total clean of all CRJ folders each times), did a Ccleaner. I have uninstalled the CRJ, uninstalled/reinstalled P3D client (but my P3D was already up to date) and then reinstalled the CRJ (each tim without antiviruses and computer restart between each uninstallation/reinstallation ....). Can you help me please ? (I did…

Hello, Is there a way to set the parking brake by default at startup? I always seem to have to make an adjustment to weight/fuel and it won't let me unless parking brake is set. Thanks, Marc

Good Day Everyone, I recently installed the CRJ Pro and bought a Navigraph subscription. I tried to load the charts onto the EFB, but each time I type in an airport, literally no charts pop up for me, almost as if the buttons aren't working. I can type any airport in, but it wont access any of the charts. Thanks for the help!

I'm encouraged that this product is still receiving work and upgrades after almost 4 years. I've definitely logged some great flights in it in that time. But as a real CRJ pilot, I was a bit disappointed to see in this latest service pack, the flap extension/retraction logic is still wrong, and really detracts from the product. As I believe it's already been addressed, when extending, slats move first, lock, then flaps move after about 3 seconds. Upon retraction, flaps retract first, and slats last. I can provide further detail from CRJ manuals, but I think this is known about, and I'm just wondering when we're going to see it simulated.

https://streamable.com/q7hv1x For some reason I am getting crazy stutters in the CRJ when the systems are powered on. Does not happen in any other plane on my system (not even A330). I'm on CRJ version 2.2.0.2. Any ideas? AMD Ryzen 5 5600x GTX 1070ti 8GB 32GB DDR4 3600MHz Latest P3D v5.1 on an M.2

I want crj professional p3d v5 with Honeycomb Profiles bravo throttle quadrant and Alpha Flight Controls? Someone who has it? Please regards Benny

Hello, I have been trying (both manually and through the updater from NAVIGRAPH) to update my AIRAC cycle and I can't seem to figure it out... Right now, the path is the following... C:\P3Dv5 Addons\Aerosoft CRJ Pro v5\Data\NavData\Aerosoft CRJ Professional\Data\NavData\Aerosoft CRJ Professional\Data\NavData Even if I delete the folders from the First "NavData" onward (C:\P3Dv5 Addons\Aerosoft CRJ Pro v5\Data), it still keeps making this long path.... and my main concern is i don't think its updating because I am missing several airports I try and fly to in the US (tried 47N, KDXR, for example). The MCDU will say it can't find that poin…

I am hoping someone can help, I have just removed my early version of the CRJ and the Pro version so I can install the latest CRJ pro update. I ran the installer in admin and when I loaded the airport all the screens are black and the yoke is all the way turned to the left. I have un installed and reinstalled. But nothing seems to work. I have not really used the Pro version but the early non pro version worked fine. Anyone have any ideas as to the cause or more in importantly a fix ?

Is there a way to increase the contrast or resolution on the CRJ HGS? Using P3D 5.1 Thank you. Martin

Hello every one i found that the thrust reverses are not working using the FSUIPC with my ch throttle quadrant reverses range so wanna share with you my own experience on how i managed this...but i wonder if there is another way so i can activate the reversers from my Throttles levers. And here is the link on step by step how i set my throttles specifically for the aerosoft crj 700/900. https://youtu.be/NemSFNfwiHs

Good Morning, I have the following problem with the display resolution of the CRJ prof DAVE / EFB P3D v5.1 (5.1.8.26742) CRJ prof Version 2.2.0.2 (Aerosoft updater) Did I overlook somethimg in the manuals? Can somebody help me? Manfred

Hi there, The stab Trim always goes off beyond the limit to maximum if I use the HDG knob to manually intercept the ILS for example Has someone noticed that correlation between HDG in curves and Trim? Greetings Manfred

Pls Ignore

Hi, I am using Aerosoft CRJ 700 (v1.2.3.0) on FSX:SE and I have three issues I cannot manage to resolve. Maybe someone have the solution. 1. When I start cold and dark, I put batteries and APU ON then when I want to start engines, the left or right button "Engine start" does not react when I click on it, even the ignition button. I must use the panel state "Ready to taxi" then back to "Cold and dark" and now it works fine. 2. When I am going up in the sky and I reach the maximum speed, which can be seen with the red dotted vertical line on the instruments I hear an alarm sound which it seems I cannot turn off even if I stabilize my spee…

Using the very latest update of CRJ. Noticed that the airports do not display on the ND screen when selected in the FMS. After cycling through OFF, ON, COMP a few times, they then appear. I think this was listed as one of the new fixes but it is not working properly.

Good afternoon forum. I am flying the P3Dv5 variant of CRJ Professional (version 2.2.0.1). Upon load of the aircraft I noticed the Ice Detection on overhead panel was illuminated. Weather conditions were not conducive for ice conditions (OAT approx 81 degrees F). I have been unable to clear this indication thus far using the troubleshooting procedures below: -Restart of simulator -Load differerent livery, default livery, model -Load of default aircraft and then load of Aerosoft CRJ -start at different airport -Click set payload in Simulator -Click Copy perf init data to FMS All troubleshooting efforts have not resolved the abili…

I recently switched to navigraph and was trying to logon through the EFB and get errors after authenticating. I have posted over in the navigraph forum but was wondering if this was a problem within CRJ or Navigraph. Has anyone successfully logged on through the EFB on the CRJ pro to navigraph and had the charts displayed? Thanks in advance for any replies. John

Hi, I tried to activate the NavPro in the DAVE. But the mouse does not seem to work on this page?

Hi Hans et all, Using the CRJ Pro v2.0.0.3 on Windows 10 in P3D v4.5, my location is not displayed right on the EFB charts provided by NDP. This happens all the time and at all locations. Sometimes it even shows me flying backwards :). Here I'm still at the gate at Schiphol: As you can see, Im perfectly aligned on the SID, but the chart shows otherwise: Side question: is the cockpit supposed to be this dark? Especially the overhead panel is hard to use/read, even during daylight. Best regards, Stefan

Hi there. As said in the titel, when i spawn in with the crj i have no power whatsoever, engines are running, but i cannot do anything and the flight controls are turning left. I have read some other reports with same issues and i have tried to fix it that way, but nothing seems to work. I am using the absolute latest version v2200.

I just installeed the CRJ Pro and after starting it, I detected that I could not start the Battery Master - the button works but with no consequence. Further I noticed that I could not switch on the EFB. On the image below one can also notice the Yoke in the extrem left position. Here are some important details: OS: Windows 10 SIM: P3d Version 4.5.13.32097 Virual C-++ 2015-2019 Redistributable x64 installed and active Failure does not occur with other AS products (A320 fam, A330). Also the previous CRJ version works without a problem. Also tried with following scenario: previous CRJ uninstalled - only…

Sorry, if this question appeared before, at very flight with the CRJ Professional, I get multiple "Minimums" callouts, from MDA or DH till touchdown. Any ideas or informations? Thanks and kind regards, Herbert

I downloaded the NavPro software over the weekend but I still do not see it on the DAVE Charts section? Installed to C:/Lockheed Martin/P3d folder, I assume that is the correct landing spot? Via the GUI that comes with software selected the proper P3D version and folder, and I have an excellent internet connection. So what am I missing?

I have the 2.0.0.3 version. On the DAVE in the Charts section it does not seem to react to attempt to toggle buttons. I think I am missing something as in some videos it appears to be working. I can go to the other sections and select functions it only has problem with Charts?