data63 421 Posted April 12, 2016 Share Posted April 12, 2016 do you use the latest AES (2.41) which should take care of SODE 1.3? from the AES forum------ 2016-03-23: Installer is replaced including all Fixes above and get a new AESHelp to fix the Issues with SODE 1.3.x detection Please download and run the Installer 2.41 again to get the latest version. ------ and did you do a deinstall and afterward reInstall of the affected airports with their SODE 1.3x version? Link to post Share on other sites
idema 0 Posted April 13, 2016 Share Posted April 13, 2016 THANK YOU! I now have LIRF and EPWA fully working. The issue remains at LEVC No loading bridges appear. .. Link to post Share on other sites
Fred Pickering 11 Posted April 14, 2016 Share Posted April 14, 2016 On 4/12/2016 at 22:08, idema sagte: This is the situation today tryng to activate airports reinstalled by AES Help utility: I have installed AES 2.42 have SODE 1..3 and LEVC and have the same error AES is not working Link to post Share on other sites
Fred Pickering 11 Posted April 15, 2016 Share Posted April 15, 2016 I have now got SODE to work at LEVC after downloading new version 1.32 http://sode.12bpilot.ch/ but sadly still cannot activate AES Link to post Share on other sites
data63 421 Posted April 15, 2016 Share Posted April 15, 2016 did you check, that you have the most recent versions for ALL the scenerys? there have been SODE updates for all of them as far as I can recall. Link to post Share on other sites
Fred Pickering 11 Posted April 15, 2016 Share Posted April 15, 2016 Yes all new and I removed older versions of programs SODE is working now but its blocking AES. Link to post Share on other sites
data63 421 Posted April 16, 2016 Share Posted April 16, 2016 maybe you could post your SODE configuration file as it looks there is something in it missing AES looks for. Link to post Share on other sites
Fred Pickering 11 Posted April 16, 2016 Share Posted April 16, 2016 you will have to tell me which file exactly you are looking for As I said SODE is working but AES cannot find or do any changes to this file but it exists Link to post Share on other sites
ugandaone 3 Posted April 16, 2016 Share Posted April 16, 2016 Any help appreciated must be others with same issue Link to post Share on other sites
Developer OPabst 2015 Posted April 16, 2016 Developer Share Posted April 16, 2016 Vor 1 Stunde, Fred Pickering sagte: you will have to tell me which file exactly you are looking for As I said SODE is working but AES cannot find or do any changes to this file but it exists vor 11 Minuten, ugandaone sagte: Any help appreciated must be others with same issue Fixes for this issues here Link to post Share on other sites
Fred Pickering 11 Posted April 16, 2016 Share Posted April 16, 2016 Super Thank. :-))) Works perfect Thank you. Link to post Share on other sites
Felidae 36 Posted April 18, 2016 Share Posted April 18, 2016 Hi, could you be so kind to indicate what is the fix. I have the problem at least with AES(latest 2.42) and Valencia (latest 1.1) The sceneries have installed 12bPilot Sode in Program files (X86) and in Programdata (EPWA and Rome by MK Studios), in Fsx (Sode) and in FsX>Simware>Valencia !! What a confusion! Better said a chaos! We are still waiting on clearing instructions . There is a pdf by Sode called SODE// Filesystem Structure Overview V1.3 + but it's for developpers. Aes 2.42 is still not working . Maybe it would be wiser not to put unfinished products on the market. I would welcome any help Thanks 1 Link to post Share on other sites
harpsi 0 Posted April 30, 2016 Share Posted April 30, 2016 Hi Sorry, this is a big misconfuse. If you want to install Svolvaer + ORBX Global Vector + ORBX Global Base + ORBX FTX Norway Region, what do we need to do in terms of scenery order and other issues like SODE? Tks. harpsi Link to post Share on other sites
WebMaximus 267 Posted May 15, 2016 Share Posted May 15, 2016 Up until now I have disabled SODE all together to avoid issues but thought I would give it a fair chance now that hopefully some of the initial issues have been solved. I'm using P3Dv3.2.3. First question I have is what of the below Aerosoft airports make use of SODE and what version of SODE they support? - Heraklion - Thessaloniki - La Palma - London Heathrow - Mallorca - Rome - Split - Svalbard - Tromso - Zurich I know Rome is using SODE and I believe it supports version 1.3 but please correct me if I'm wrong. In order to have that one working with SODE do I need to do anything else but installing the scenery and making sure I use the latest installer found on my download page? Link to post Share on other sites
Cargostorm 98 Posted May 15, 2016 Share Posted May 15, 2016 From the airports you mentioned, I can only identify Rome that uses SODE. It supports recent v1.3.2. No need to disable SODE alltogether. Even old v1.2 airports can be used with the current SODE version, then though without jetway functionality. And you would need to copy files. Not for everbody. But I think that most airports have been updated by now to v1.3. Link to post Share on other sites
Speedbird ATC 91 Posted June 12, 2016 Share Posted June 12, 2016 Hi, I have managed to get the SODE jetways on Rome and MYNN showing, but when I press TAB-S, it says no triggerable objects within 12km. GSX does not toggle the jetways either. Full details in this thread: 1 Link to post Share on other sites
FlavioSSA 21 Posted July 10, 2016 Share Posted July 10, 2016 On 11/12/2015 at 9:36 AM, Fabian Boulegue said: Bonaire Flamingo Airport X Hi! I just installed SODE 1.3.3. Is the airport above compatible with this version already? Do i have to download the installer again? Thanks! Link to post Share on other sites
flightmanager 12 Posted July 16, 2016 Share Posted July 16, 2016 SODE 1.3.4 is now released. i want to know if this cause any problems to addons, like Valencia, Rome etc.. Thanks in advance. Link to post Share on other sites
Developer 12bPilot 43 Posted July 16, 2016 Developer Share Posted July 16, 2016 Vor 1 Stunde, flightmanager sagte: SODE 1.3.4 is now released. i want to know if this cause any problems to addons, like Valencia, Rome etc.. Thanks in advance. No. Link to post Share on other sites
ca210270 4 Posted July 17, 2016 Share Posted July 17, 2016 Hi, I read that SODE would include a visual docking system in a next update. Is it still long to go? Thanks. Link to post Share on other sites
data63 421 Posted July 18, 2016 Share Posted July 18, 2016 please keep in mind, that this new feature of SODE will have to be included by scenery developers to be of use for you. For existing sceneries nothing will happen (without an update of the scenery) Link to post Share on other sites
Benny96 111 Posted July 21, 2016 Share Posted July 21, 2016 Does anyone have a list of what payware products that uses SODE? Link to post Share on other sites
yakyak 19 Posted July 22, 2016 Share Posted July 22, 2016 EETN LIRF HTKJ TNCB LOWL LOWS ULLI UWGG LBWN To name just a few. Other will be able to add to the list I'm sure. Nick 1 Link to post Share on other sites
ca210270 4 Posted July 23, 2016 Share Posted July 23, 2016 One thing I don't like in SODE jetways: I noticed that all SODE jetways, at least in the sceneries I have (LIRF, EPWA, LEVC), when docking to the airplane (in my case 737 NGX, P3D v3.3) have the foremost part, that is the part that docks to the airplane, that disappears when seen from inside the virtual cockpit and you see pieces of inside the jetway and the background scenery, and the front part of the jetway is invisible, really a mess. This doesn’t happen with normal CTRL+J jetways and Aerosoft AES ones. Is it possible to improve the visual model of the jetway, so that it’s seen correctly from the VC? Thanks. 1 Link to post Share on other sites
HardrockCafe 69 Posted July 23, 2016 Share Posted July 23, 2016 Can you post a picture? I can't imagine this. For me SODE Jetways seems to work perfect. Link to post Share on other sites
.png.59d17117dc1c821077c542002631cb0e.png)
Recommended Posts