Hardware with any other simulator

When attempting to remove the throttles out of reverse in MSFS2024 (only), the #2 axis does not come out of the reverse detent unless manually removed by the mouse in game. I've checked my controls and they seem to be aligning in game, so i'm not sure what the issue is. This also happened with the iFly 737-8 MAX and other aircraft in MSFS2024. This issue only persists in MSFS 2024. I am happy to share a screenshot of my controls if needed. Any ideas as to what this could be? Fenix A320 Reverse Avis (HC Bravo).mp4

I am using X-Plane 12 with the Real Sim Gear G1000 on a Cirrus SR22T from Torquesim. There wasn't the possibility to fly a hold for a long time. Meanwhile it has been added. In real life when being in a hold and required to exit there is a menu item "Exit hold". This does not exist in the simulator. Does anyone know anything about this, especially about plans to add this functionality?

I am new to the forum and new to Honeycomb hardware. I have the Honeycomb Yoke, Throttle, and Pedals. I have MS Flight Simulator 2024. I typically fly single and twin prop and twin engine jets. The problem I am having is I can not get the all the switches, throttle levers, flap lever, and spoiler levers to work correctly. At this point I feel I have the control assignments so screwed up I am not even sure how to start over. Couple questions: 1) How can I "factory default" all the controls for all planes in MSFS2024? 2) Is there a good tutorial to understand how to make control assignments in MSFS2024, I have yet to find a good one? 3) Are there any pro…

Hello, I just bought and installed the Honeycomb Alpha Yoke. I also downloaded and installed the configuration tool. However, when I start FSX, the activated Profile (default) is not initialized. The Yoke itself is recognized by FSX (I can assign buttons to functions) but the toggle switches are not working. I also do not have the Honeycomb sub-menu in the Add-On menu. Any idea, how to get the thing working? (It works perfect with P3D). Thanks

Hello everyone, I know maybe this will be super simple but between work, family and life I cannot get this straight, sorry I was able to download yesterday the honeycomb tool for my xplane 12 and probably added the zibo 737 profile from the forums here, but my question is what I do next, I have to still go into xplane 12 and set all my controls? i did some but none of the buttons work still so again Im completely lost, can anyone please take the time to explain me the steps on what to do? thanks for any help

Hey Aerosoft community, I’ve been flying in MSFS 2020 and X-Plane for a while now and I’m looking to upgrade my setup. Right now, I’m using a basic desk and chair with a solid rig (Ryzen 7 5800X, RTX 3070, 32GB RAM), but I want to move to a proper cockpit for a more immersive experience. I’m stuck between building a DIY cockpit or going for a pre-built solution. I’m looking for something sturdy and comfortable for long flights, but I’m wondering if the time and effort of building my own is worth it or if a pre-built setup would be better. Has anyone here made the jump? I’d love to hear your thoughts or experiences on which path is the best choice. Than…

Relatively new to anything computer, so please forgive stupid questions, but I cannot for the life of me assign autopilot functions for my F33 Bonanza. All my other payware have working profiles, both in the Configurator, and in X-Plane 12. Any ideas what buttons I need to push? This is for the Carenado version, btw.

The Low Hyd Pressure light never goes out. The door open light never comes on. The rotary selectors only work for HDG. In the ALT position if the display is in ft/min the panel display knob spins but the number display is unaffected. If the display is in the feet position, the numbers and knob just flicker unchanged. All the other rotary positions do nothing. As the plane does not have an IAS, nothing is what would be expected for that position. I have tried the configurator then the entire bravo lights and auto pilot would not work. I had saved my files and restored them, so at least I am back to where I was. I really like the Bravo, but need help with this. I h…

Hello, I am flightsimosaurus still flying with FSX, and I have just bought the Honeycomb Alpha and Bravo for my PMDG 737 and 777. It seems that the "activate PMDG" option should be enabled when using PMDG addons, but I can not select FSX, the only choices available are P3D v4 or V5. So I would lile to know I really have to enable this option or if the Alpha and Bravo can not be used for PMDG on FSX (I do hope not). Thanks for your help!

Good morning, I'm not an advanced user and I want to assign datarefs on my bravo throttle Honeycomb hardware, like for example: - I would like to configure the Concorde Heritage. The developer offers me these datarefs: the reheats uses now different datarefs, here they are: Gastonreif/Heritage/switch_cty1_overriden Gastonreif/Heritage/switch_cty2_overriden Gastonreif/Heritage/switch_cty3_overriden Gastonreif/Heritage/switch_cty4_overriden Where value of 2 is reheat off, value of 1 is CTY and value of 0 is reheat ON. VS works in combination of FD1 switch on autopilot, use this VS slider dataref> Colimata/CON_CC_APCTRL_nose_u…

Hello, I read the Aerosoft a320/321 Manual to set up my Thrust Master Hand stick and Throttle but the Throttle quadrant would simply not work. Its very sensitive and the reverse thrust wouldnt work and also the handsticks AP wouldnt switch on even though its enabled in settings same with the auto thrust i press nothing happens can you please help me i dont want to spend 250e for nothing (FSX) Steam edition because they sometimes work well sometimes they dont.

hello, after reinstalling windows, i lost the configurator for FSX (for the honeycomb yoke). I tried to download it again, but the link isn't working. I know im not alone, and i used the workarounds but still impossible : I successfully downloaded the profiles for FSX (the second link) after creating an account on this forum (i wasn't allowed to before). But the first link wich should point to the configurator executable give me a : "oops, something went wrong" with firefox / chrome and microsoft edge. it comes with an error code : 2S119/1 I don't get a "you don't have the right to..." in the page but the title of the page is "sorry, you do n…

I have read the various threads on this discussion topic and attempted several times to reassign/map my Saitek Cyborg controller and keyboard. Changes made are not accepted. The default settings allow xyz axis control and a small number of buttons to function e.g view, camera position. However the commands shown in the manual for a Simple Controller do not work with my old Saitek. Not all keyboard functions work either. e.g. No Flap or spoiler movements can be controlled. Before spend any more time trying to assign actions, would you confirm that a new controller is probably required to gain full function of critical controls. Best regards.

My X56 is not working in game. The game detects the axis for the X56 in the setup menu but do not work in game. I have tried original X56 setting. I have tried both lanes for controls in the setup menu. Also my TrackIR is not detected. Even if I "activate" it with the key selected in input menu. It works in other games.

Hi, If I make a small input with my joystick, a maximum input is made in the game. here you can see the bug in the video. https://www.youtube.com/watch?v=-LWodhqjtBU Hardware: Joystick: Speedlink phantom Hawk Throttle: Speed quadrant

Hallo zusammen, suche profil für Warthog Hotas und Pedale beste Grüße klostie

When I try to assign a control to one of my joystick buttons I get this incomplete mapping message- not ok. Why is this happening?

i downloaded 'world of aircraft - glider simulator' through steam , i open the game and all i get is the main menu nothing works no keyboard or mouse clicks work no contoller or joystick works - am i missing something ? please help

hello guys having trouble setting up a profile for thrustmaster tca sidestick none profiles work and it wont let me input controls to create my own

If so contact me on mathijs.kok@aerosoft.com!