jewel777 0 Posted October 17, 2014 Share Posted October 17, 2014 OK the same crash on exit happens to me and started with A318/319. The different thing is that the sim crashes now everytime with every aircraft! The crash report is always BEX. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted October 17, 2014 Aerosoft Share Posted October 17, 2014 OK the same crash on exit happens to me and started with A318/319. The different thing is that the sim crashes now everytime with every aircraft! The crash report is always BEX. But if you do not load the A318/A319 that seems more to indicate a general problem (often because of an incorrect ddl.xml btw) Link to comment Share on other sites More sharing options...
mwa05 7 Posted October 18, 2014 Share Posted October 18, 2014 Hi Mathijs, I have a dedicated FSX computer, and a very stable and clean install. My operating system is Windows 7 SP1 and it's an i5-3470. The baby buses are the only aircraft I have installed this year and I was getting the freeze on exit, with the application hang error message. I solved the problem by setting disable pre load to 0. I don't have RAAS active although it is installed. BTW, I was also having McAffee quarrantine the configurator. In the end I had to completely disable McAffee and I reported it. Today, the software is leaving it alone, so they may have actioned it. Thank you for a great product and support. Kind regards, Mark Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted October 19, 2014 Aerosoft Share Posted October 19, 2014 I now have one machine that shows this behavior so we can test! Link to comment Share on other sites More sharing options...
Alu 3 Posted October 20, 2014 Share Posted October 20, 2014 Hi Mathijs, yesterday i made a new attempt. I deinstall the A318 completely from FSX. Then, because of some terrible failures in FSX, i delete my tweaked fsx.cfg and let fsx create a new one. After that and only add Highmemfix=1 and Affinitymask=14 i reinstall my A318. I made some tests and never in the Tests i got a FSX crash so far. I can change the Planes in the Menu and make flights, nothing happened. It works for me now. Regards, Peter Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted October 20, 2014 Aerosoft Share Posted October 20, 2014 Mmmm a clear affirmation of what we see. This happens on tweaked systems, not on 'new' ones. That might fit as many of the 'tweaks' actually cut corners to make things faster. The machine I can confirm it on also was tweaked heavily by 3rd party tools. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted October 20, 2014 Deputy Sheriffs Share Posted October 20, 2014 Rebuilding the fsx.cfg is always a good advice as most people simply tweak their FSX to death by randomly using tweaks from other users or from certain websites, but have no clue what a specific tweak does to their system. Link to comment Share on other sites More sharing options...
hadoken 4 Posted October 20, 2014 Share Posted October 20, 2014 Awhile back I added DisablePreload=1 under [MAIN] when I was fixing some vsync issues after I switched over to DX10. A few things about this tweak. First, you shouldn't need this tweak to have vsync work correctly in DX10 if you have NVIDIA Inspector set correctly. Second removing this tweak from my config file fixed the A318/A319 crash issue on my system. The only other tweaks that I use are the ventubo tweaks, and I have no issues with the crashing issue with just using those tweaks alone. Removing DisablePreload=1 for some people will cause vsync tear issues. Not adding any of the vsync tweaks to my config file, and letting NVIDIA Inspector manage vsync alone eliminates the need for DisablePreload=1 if you're in DX10 mode. I only fly in Fullscreen mode, if you fly Windowed mode I would assume that the same I have mentioned would apply. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted October 21, 2014 Aerosoft Share Posted October 21, 2014 Mmmm a clear affirmation of what we see. This happens on tweaked systems, not on 'new' ones. That might fit as many of the 'tweaks' actually cut corners to make things faster. The machine I can confirm it on also was tweaked heavily by 3rd party tools. On the machine I could identify the issue on I did delete the FSX.cfg, reinstalled the A318/A319 and could no longer get it to crash on exit. For people who use P3D, please activate errorlogging by inserting ContentErrorLogging=1 to the MAIN section of the P3D.cfg. That will create an error log when you shut down P3D. If there is any stuff related to the bus let me know. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted October 22, 2014 Aerosoft Share Posted October 22, 2014 Perhaps nobody that has the error is using P3D, so let's try another approach: Unzip the attached file to a folder, it does NOT need to be installed. It's a debugging tool from MS. 100% save.ProcessExplorer.zip Now start FSX, close it and get to the error. Don't click anything anything away at this moment!!! Start Process Explorer Look for the FSX (or P3D) process Right click -> Create Dump -> Mini Dump Zip the resulting file and attach it here Using that file we can see what is still running and waiting for a connection or something. Link to comment Share on other sites More sharing options...
KAPTEJNLN 237 Posted October 23, 2014 Share Posted October 23, 2014 ok I have tryeid what could cause P3D v2.4 to keep running/crashing by version 1.12B and have no problem by now as i cant cause it at the moment.. Link to comment Share on other sites More sharing options...
flydk 1 Posted October 23, 2014 Share Posted October 23, 2014 Never had the problem before, but know getting this when i end flight with A319/318. Just Highmemfix in cfg Beskrivelse Sti for fejlbehæftet program: C:\FSX\fsx.exe Problemsignatur Problemhændelsesnavn: BEX Programnavn: fsx.exe Programversion: 10.0.61637.0 Tidsstempel for program: 46fadb14 Fejlmodulnavn: FMGS.DLL_unloaded Fejlmodulversion: 0.0.0.0 Tidsstempel for fejlmodul: 543dc01a Undtagelsesforskydning: 3550a20d Undtagelseskode: c0000005 Undtagelsesdata: 00000008 OS-version: 6.1.7601.2.1.0.768.3 Landestandard-id: 1030 Flere oplysninger 1: 19d8 Flere oplysninger 2: 19d83d82a7bc2b2446a88128dd04d113 Flere oplysninger 3: 35c3 Flere oplysninger 4: 35c3175b356808b78831e3c39acab21a Ekstra oplysninger om problemet Bucket-id: 50 Tried the AXE 320/321 and default aircraft no problems there... Link to comment Share on other sites More sharing options...
Norcal Bear 0 Posted October 23, 2014 Share Posted October 23, 2014 I too am experiencing the crashes on exit with the A318/A319. I have added my dump file and hopefully it can provide some assistance in the matter. I only experience the crash when using the A318/A319 range of aircraft. fsx.zip Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted October 24, 2014 Aerosoft Share Posted October 24, 2014 I too am experiencing the crashes on exit with the A318/A319. I have added my dump file and hopefully it can provide some assistance in the matter. I only experience the crash when using the A318/A319 range of aircraft. Thanks! Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted October 24, 2014 Aerosoft Share Posted October 24, 2014 Never had the problem before, but know getting this when i end flight with A319/318. Just Highmemfix in cfg Beskrivelse Sti for fejlbehæftet program: C:\FSX\fsx.exe Problemsignatur Problemhændelsesnavn: BEX Programnavn: fsx.exe Programversion: 10.0.61637.0 Tidsstempel for program: 46fadb14 Fejlmodulnavn: FMGS.DLL_unloaded Fejlmodulversion: 0.0.0.0 Tidsstempel for fejlmodul: 543dc01a Undtagelsesforskydning: 3550a20d Undtagelseskode: c0000005 Undtagelsesdata: 00000008 OS-version: 6.1.7601.2.1.0.768.3 Landestandard-id: 1030 Flere oplysninger 1: 19d8 Flere oplysninger 2: 19d83d82a7bc2b2446a88128dd04d113 Flere oplysninger 3: 35c3 Flere oplysninger 4: 35c3175b356808b78831e3c39acab21a Ekstra oplysninger om problemet Bucket-id: 50 Tried the AXE 320/321 and default aircraft no problems there... Please make the dump file so we can check it out! Link to comment Share on other sites More sharing options...
flydk 1 Posted October 24, 2014 Share Posted October 24, 2014 Ok, here you go young sir fsxdump.txt Link to comment Share on other sites More sharing options...
KAPTEJNLN 237 Posted October 24, 2014 Share Posted October 24, 2014 Ok, here you go young sir Have you followed this method with the program, as I can see there are differences between your file and from another user: http://forum.aerosoft.com/index.php?/topic/85493-a318319-crashing-on-exit-combination-topic/?p=624856 Danish version: Har du fulgt denne metode med programmet, da jeg kan se der er forskelle på din fil og den fra en anden bruger: http://forum.aerosoft.com/index.php?/topic/85493-a318319-crashing-on-exit-combination-topic/?p=624856 Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted October 24, 2014 Aerosoft Share Posted October 24, 2014 I too am experiencing the crashes on exit with the A318/A319. I have added my dump file and hopefully it can provide some assistance in the matter. I only experience the crash when using the A318/A319 range of aircraft. That one did not show any error we can trace, it just seems FSX does not unload some stuff. An error they had since FS4. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted October 24, 2014 Aerosoft Share Posted October 24, 2014 Ok, here you go young sir Thanks we'll check that one. Link to comment Share on other sites More sharing options...
Wiseblood 8 Posted October 26, 2014 Share Posted October 26, 2014 Just to let you know that since 1.12b I no longer have the fsx.exe not shutting down issue. It may have been an earlier fix to be honest as I have been constantly selecting a default aircraft before exit since the release, but exiting after a particularly exhausting flight without deselecting the A318/319 by accident I was amazed to see FSX close normally. Repeating this all seems to works fine. I appreciate that probably doesnt help troubleshooting as it was never actually crashing, but I just wanted to say thanks to Aerosoft...for whatever you did! Thank you. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted October 27, 2014 Aerosoft Share Posted October 27, 2014 Other people able to confirm this? Link to comment Share on other sites More sharing options...
BrianT 4 Posted October 27, 2014 Share Posted October 27, 2014 I can also confirm this Mathijs, I had also earlier in the day installed PFPX/TOPCAT and EFB so I can't rule out 3rd part interference but It is now working fine. Switching between the various Airbus and exiting now works as expected. Link to comment Share on other sites More sharing options...
Norcal Bear 0 Posted October 27, 2014 Share Posted October 27, 2014 I just applied the 1.12c hotfix and completed a flight from KSAN to KSFO with no problem. ActiveSky Next was loaded and configured in networked mode and I was able to complete the flight, exit the flight, and exit the simulator without a crash. So far, so good......good job Aerosoft! Link to comment Share on other sites More sharing options...
jewel777 0 Posted October 27, 2014 Share Posted October 27, 2014 As i posted earlier in this thread i started have crashes on exit with A318/319 and then with all aircrafts. Now with hotfix 1.12c i have NO CRASH ON EXIT! Thanks Aerosoft! Link to comment Share on other sites More sharing options...
Dreamflight767 5 Posted October 27, 2014 Share Posted October 27, 2014 Just had a crash prior to dep. in DEN on the A319. FSX (no P3D), windows 7 64. Using ALL hotfix and latest versions. Problem signature: Problem Event Name: APPCRASH Application Name: fsx.exe Application Version: 10.0.61637.0 Application Timestamp: 46fadb14 Fault Module Name: FMGS.DLL Fault Module Version: 1.2.6.60 Fault Module Timestamp: 544d8d3b Exception Code: c0000005 Exception Offset: 000028f7 OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.