DaveCT2003 2442 Posted August 25 Share Posted August 25 5 hours ago, PetterWS said: shall the come, more aircraft too msf2020? crj and more ?and sceneries? https://secure.simmarket.com/drzewiecki-design-moscow-landmarks-msfs.phtml Yes, and the Moscow Landmarks is in the process of being added to our shop as we speak. Best wishes! Link to post Share on other sites
JEP795 0 Posted August 26 Share Posted August 26 Mathijs any news on possibly bringing Malaga airport to the new sim? Sad to see it wasn’t even generically modeled by MS. Link to post Share on other sites
masterhawk 597 Posted August 26 Share Posted August 26 Hi, I think by time you will see a lot airport addons for MSFS. But keep in mind. A lot FSX/P3D addons in the portfolio of aerosoft have been developed by independent developers and had only been released via aerosoft. So a lot depends on, if the developers are still active and willing to release for MSFS. And a fast port over for older addons is not what we should hope for. A good insight about the new sim and how and if something should be converted you can get from this interview: https://www.simflight.de/szenerie-design-im-msfs-ein-interview-mit-fsdreamteam-2/ A English version is halfway down below the German version. 2 2 Link to post Share on other sites
billg 2 Posted August 27 Share Posted August 27 As you upgrade aircraft for FS 2020 please consider the PBY Catalina. It is an all time favorite from it's era. Thanks. 1 1 Link to post Share on other sites
Mathijs Kok 33612 Posted August 27 Author Share Posted August 27 Paderborn should arrive in the next few hours. 3 Link to post Share on other sites
wolland 0 Posted August 27 Share Posted August 27 Great job guys, congrats and thanks, Paderborn looks great and it didn't affect FPS, I'm actually getting same FPS as on the default one, which is great. I hope I will be able to say the same for CRJ apropos FPS, because it's evidently looking amazing, I can't wait to get it. One question: will the new CRJ come with Dave, that really useful Ipad thingy on the side of the cockpit? Thank you and best regards! Link to post Share on other sites
Stewart 133 Posted August 28 Share Posted August 28 I have just downloaded and installed Paderborn and would like to offer my thanks for this generous gift from the team at Aerosoft. Your efforts are very much appreciated. Thanks so much Link to post Share on other sites
Er!k 388 Posted August 28 Share Posted August 28 Many, many thanks for bringing us Paderborn for free. It was also very busy at the airport last night with people to try it out. First thing I did was slew to the Aerosoft building 1 Link to post Share on other sites
Stewart 133 Posted August 28 Share Posted August 28 1 hour ago, Er!k said: ....... First thing I did was slew to the Aerosoft building Now if we could just have a little model of Mathijs cycling home from work....LOL 1 Link to post Share on other sites
exlin 0 Posted August 28 Share Posted August 28 Actually I have two wishes that would be awesome to get Helsinki-Vantaa Airport and second is A350-900. Cheers Link to post Share on other sites
mopperle 3411 Posted August 28 Share Posted August 28 15 minutes ago, exlin said: Actually I have two wishes that would be awesome to get Helsinki-Vantaa Airport and second is A350-900. Cheers As serious A350 will never happen. Has been discussed many times in the Aerosoftforum. Link to post Share on other sites
Hauer 10 Posted August 28 Share Posted August 28 Regarding Helsinki - Vantaa Airport, I believe MK-Studios are currently working on it. Looking forward to it too! Cheers - Herman Link to post Share on other sites
exlin 0 Posted August 28 Share Posted August 28 12 minutes ago, mopperle said: As serious A350 will never happen. Has been discussed many times in the Aerosoftforum. Ah, ok. Will search more but if I understood correctly it would be too complex/expensive undertaking and will need to see what other planes with longer range than A320 we get for MSFS. 5 minutes ago, Hauer said: Regarding Helsinki - Vantaa Airport, I believe MK-Studios are currently working on it. Looking forward to it too! Cheers - Herman Thanks, great to hear that someone is working on it already. Can't wait Link to post Share on other sites
Mathijs Kok 33612 Posted August 28 Author Share Posted August 28 Some more news, now about airports... here is the list that we plan to do for starters. Paderborn Brussels Cologne Trondheim Ibiza Hamburg St. Tropez Norsee-Inseln 2 2 2 Link to post Share on other sites
Herman 1029 Posted August 28 Share Posted August 28 2 hours ago, Mathijs Kok said: Some more news, now about airports... here is the list that we plan to do for starters. Paderborn Brussels Cologne Trondheim Ibiza Hamburg St. Tropez Norsee-Inseln Super happy to see that last one. One of my early AS add-ons when first released was the North Sea islands. It included a couple of nice missions that worked really well, such as a movie run (shuttling movie reels around the different islands in a 172 I believe). I'm sure that service is long gone thanks to the internet and streaming video. Fond memories. 1 Link to post Share on other sites
PeSt 15 Posted August 28 Share Posted August 28 Thank you very much for Paderborn. And great to hear that Nordseeinseln is on your list. btw Saitek panels with spad.next runs, but huge frame impact. Link to post Share on other sites
andreas.guther 0 Posted August 28 Share Posted August 28 7 hours ago, Mathijs Kok said: Some more news, now about airports... here is the list that we plan to do for starters. Paderborn Brussels Cologne Trondheim Ibiza Hamburg St. Tropez Norsee-Inseln Hello, any chance for Stuttgart? I‘m asking because it’s completely missing at the moment... Best, Andreas Link to post Share on other sites
Hazza 1 Posted August 29 Share Posted August 29 17 hours ago, PeSt said: Thank you very much for Paderborn. And great to hear that Nordseeinseln is on your list. btw Saitek panels with spad.next runs, but huge frame impact. This is a known issue and is NOT caused by Spad.Next. The problem affects ALL programs/utilities that use SimConnect (VatSim's VPilot, LittleNavMap, etc). MS/Asobo are aware of the problem and have promised a fix when the first patch is delivered this coming week. 1 Link to post Share on other sites
skyen 0 Posted August 31 Share Posted August 31 Looking real forward to this release of CRJ. I am a CRJ airline pilot in real life, but lost my job due current crisis. You clearly have experts working, but I would gladly help out if there is anything I can help with. Link to post Share on other sites
Mathijs Kok 33612 Posted August 31 Author Share Posted August 31 Drop me a mail at Mathijs.kok@aerosoft.com. But do not be surprised if I ask for some proof of you being a real pilot. We have been bitten by 15 year old 'captains' before. Link to post Share on other sites
jolouv 4 Posted August 31 Share Posted August 31 Hi What a wonderfull scenery EDPL ! Great job Aerosoft and developpers. I'm discovering this aera and would love to fly to it's swiss "big sister", Geneva... one day... on a great A320, one day later... Thank you so much. 1 Link to post Share on other sites
kberg 1 Posted September 5 Share Posted September 5 On 8/28/2020 at 1:03 PM, mopperle said: As serious A350 will never happen. Has been discussed many times in the Aerosoftforum. So it will be a A350 XWB then, nice 😁 Link to post Share on other sites
Lord Wukits 1 Posted September 17 Share Posted September 17 It really looks like Aerosoft has a lot of the work already done. and the models look superb. I for one would like to request the PBY Catalina for MSFS2020. In the development roadmap for MSFS2020 it is always appearing on the list given of requests, typically somewhere around the top 3 aircraft. I imagine there is still a lot of work for importing the research already done in to MSFS2020, but I imagine the hardest parts [research] are already done. It appears that there is decent demand for it from the roadmap forums. Previously mentioned, it was indicated that whole new models need to be made. I am an engineer by profession, and use Solidworks, but often need to import other CAD formats. With great models changing[importing] format is practically seamless. Would you be able to briefly cover the pitfalls of taking existing models from one platform[or native design models] into MSFS2020? ❤️ Many thanks! Wukits Link to post Share on other sites
Mathijs Kok 33612 Posted September 17 Author Share Posted September 17 Basically we need more detailed models and way more detailed textures. Importing 8 year old models and resell them is not what we do. Check what is available as aircraft for MFS and you see why. If you want to piss of any low end aircraft developer ask them if they do all the LOD models that Microsoft advises (and that makes a lot of sense, one aircraft without correct LODs can wreck your framerate). 1 Link to post Share on other sites
kberg 1 Posted September 19 Share Posted September 19 Just sitting here... patiently... waiting for the CRJ... so i can fly it to and from the new beautiful Trondheim scenery... Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now