If you want a Honeycomb Alpha for Christma you better order fast because we are quickly running out of stock!

Jump to content

Twin Otter X Repaints (outdated product)

Sign in to follow this  

In this section you will find 3rd party repaints for the Twin Otter created by Aerosoft.

46 files

  1. DHC-6-100 First Air C-FASG

    De Havilland Canadian Twin Otter 100 Wheels - FIrst Air C-FASG

    Author: Peter Rowntree (spike9@rogers.com)

    Place the entire folder labeled "texture.asg" into your fsx/simobjects/airplanes/Aerosoft Twin Otter 100 Wheels folder.
    Then copy the info below and paste into your 100 wheels aircraft.cfg file and replace the "X" with the appropriate number.

    Note: There is a minor paint problem with the bottom of the rudder on the right side this can't be fixed without disrupting the paint on the nose. I figured it is more inconspicuous at the back.

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter First Air ASG
    sim=DHC6
    model=100
    panel=
    sound=
    texture=asg
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=FASG
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-100"
    ui_variation="First Air C-FASG"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"

    542 downloads

    3 comments

    Updated

  2. DHC-6-300 Wheel Ski First Air C-FASS

    De Havilland Canadian Twin Otter 300 - FIrst Air C-FASS

    Author: Peter Rowntree (spike9@rogers.com)

    Place the entire folder labeled "texture.fa" into your fsx/simobjects/airplanes/Aerosoft Twin Otter 300 Wheel Ski folder.
    Then copy the info below and paste into your 300 wheel Ski aircraft.cfg file and replace the "X" with the appropriate number.


    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter FA Wheel Ski
    sim=DHC6
    model=ski
    panel=
    sound=
    texture=fa
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=FASS
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300 Wheel Ski"
    ui_variation="First Air FASS Wheel Ski"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"

    500 downloads

    2 comments

    Submitted

  3. Air Greenland - DHC-6 Twin Otter 300 ski

    De Havilland Canadian Twin Otter Air Greenland
    textures for Aerosoft FSX DHC-6 Twin Otter 300 payware model
    Paint kit made by Aerosoft
    Repaint by Curro Candela Lopez
    --------------------------------------------------

    Installation
    ------------

    1) In directory "SimObjects\Airplanes" in your FSX find subdirectory "Aerosoft Twin Otter 300 Wheel Ski"
    2) Copy there directory "texture.OYPOF" from this archive
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 300 Wheel Ski"
    4) Paste there following text on place above section [General]

    [FLTSIM.1]
    title=de Havilland Canadian Twin Otter Greenland
    sim=DHC6
    model=ski
    panel=
    sound=
    texture=OYPOF
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=OY-POF
    atc_parking_types=RAMP
    atc_airline=Air Greenland
    atc_flight_number=GL792
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300"
    ui_variation="Air Greenland"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"


    5) Replace [fltsim.x] with the next number in sequence

    771 downloads

    2 comments

    Submitted

  4. Twin Otter Trans Maldivian Airways - on floats

    Generic readme for Eagleskinner repaints - AEROSOFT PAYWARE "DHC-6 Twin Otter X" is needed

    Repaint name: Twin Otter Trans Maldivian Airways - on floats

    Painter's notes and Installation instructions.

    This paint has been prepared by Chris Brisland

    web: www.eagleskinner.com

    e-mail: christopher@brisland.com

    This paint is for AEROSOFT PAYWARE "DHC-6 Twin Otter X"

    Original copyright for this aircraft with Aerosoft.

    Original copyright for TMA liveries is with Trans Maldivian Airways.

    Please respect copyrights and intellectual property rights.

    This paint has been created with the kind permission of TMA Managing Director, Mr. Bram Steller. Thank you Bram for the excellent photographs. This paint may not be altered in any way without permission from both myself, Chris Brisland, and Trans Maldivian Airways.

    Please also take note that this permission to paint TMA Twotter schemes is exclusively given to me, Chris Brisland. No permission is given to anyone else to paint either the current TMA liveried Twin Otters nor any older liveries.


    NOTES

    INSTALLATION

    This zipfile contains only those textures actually changed during the painting process.

    Open your FSX aircraft folder for this particular download - it will be something like c://Program Files/Microsoft Games/Microsoft Flight Simulator X/Sim Objects/Airplanes/Aerosoft Twin Otter 100 Floats

    Extract this zipfile there. Make sure the winzip option "Use Folder Names" is checked. A new sub-folder called "texture.tma" will be created.

    Next open the aircraft.cfg file with any text editor program (Windows editor does the trick) and find the last block of text that starts with a line [fltsim.x] where the x will be a sequential number which starts at flightsim.0 and goes on for as many variants of the model are installed.

    The path to the aircraft configuration file will be:

    c://Program Files/Microsoft Games/Microsoft Flight Simulator X/Sim Objects/Airplanes/Aerosoft Twin Otter 300/aircraft.cfg


    Copy and paste the block of text from below into the aircraft.cfg file and change the x in the first line to the next number up in sequence in your cfg file


    Go flying and enjoy!


    [fltsim.x]
    title=de Havilland Canadian Twin Otter TMA - on floats
    sim=DHC6
    model=float
    panel=
    sound=
    texture=tma
    kb_checklists=
    kb_reference=
    atc_id=8QTMA
    atc_airline=Trans Maldivian Airways
    atc_flight_number=007
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-Float"
    ui_variation="Trans Malivian Airways floater TMA"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"
    description="Repaint of Trans Maldivian Airways very first Twin Otter - in recent livery and on floats!\nRepaint by Chris 'Eagleskinner' Brisland\nThis paint may not be altered in any way whatsoever without contacting the author first. /nFSX Model livery © Chris Brisland Feb 2008\nReal World TMA livery © Trans Maldivian Airways


    #########################
    # Here is a small bonus #
    #########################

    While you are in an editing mood, why not scroll down the aircraft config until you find the last entry "[CameraDefinition.00x]" (It will probably be 006 if Aerosoft didn't change the config from the last beta). NOTE: make sure you find 00x and not just the single digit one. You will note in line 3, that this camera definition is a new virtual cockpiut view...

    Just copy/paste the lines here to after the last existing camera definition entry and change the sequential number to the next in line - as I mentioned above, the last one may be 006, so this one will be 007...

    So next time you go flying, flick through the virtual cockpit views (key "a" when in VC mode) and the new view will show as "Window seat stbd Row 2C" giving you a passenger's eye view of the starboard engine...

    Just a spot of fun...

    [CameraDefinition.00x]
    Title = "Window seat stbd Row 2C"
    Guid = {03710088-6EE0-42ba-80B4-1E92E5700A9A}
    Origin = Virtual Cockpit
    MomentumEffect = No
    SnapPbhAdjust = Swivel
    SnapPbhReturn = False
    PanPbhAdjust = Swivel
    PanPbhReturn = False
    Track = None
    ShowAxis = FALSE
    AllowZoom = TRUE
    InitialZoom = 0.40
    SmoothZoomTime = 2.0
    ZoomPanScalar = 1.0
    ShowWeather = Yes
    XyzAdjust = TRUE
    ShowLensFlare=FALSE
    Category = Cockpit
    PitchPanRate=20
    HeadingPanRate=60
    InitialXyz=0.95, -0.33, -1.73
    InitialPbh=-1.5, 0.0, 86.0

    1665 downloads

    193 comments

    Submitted

  5. AeroSoft/Dehavilland Twin Otter Seair Pacific

    De Havilland Canadian Twin Otter - "Seair Pacific"
    textures for Aerosoft FSX payware model
    Author: Thierry Lustremant (thierry@titus59.info) 21/08/2008


    Installation
    1) Extract all the files to a temperary folder
    2) Copy there folder "texture.VH-TZR" into FSX directory "SimObjects\Airplanes\Aerosoft Twin Otter 300
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 300"
    4) Paste there following text on place above section [General]

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter Seair Pacific
    sim=DHC6
    model=300
    panel="org"
    sound=
    texture=VH-TZR
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=VH-TZR
    atc_parking_types=RAMP
    atc_airline=Seair Pacific
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300"
    ui_variation="Seair Pacific"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"
    description= Aircraft first registered in Australia: 18 September 1989. Model: DHC-6 SERIES 200. Serial number: 145. Based at Coolangatta on Queensland's Gold Coast. Seair's Great Barrier Reef Daytrip is the only one of its type in Australia. This tour also departs from Maroochydore Airport on the Sunshine Coast.

    5) Replace the X in [fltsim.X] with the next available number in the aircraft.cfg file i.e if the last entry is 6 change the X to 7



    This is my second repaint, so any comments or suggestions are welcome.
    I've tried to reskin the interior of the plane a little bit too. Hope you'll like it !

    Thierry

    568 downloads

    5 comments

    Submitted

  6. Vista Liner (Grand Canyon)

    Place the folder [texture.n227sa] in the folder [simObjects\Airplanes\Aerosoft Twin Otter 300] and add these lines to the aircraft.cfg file for that folder.


    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter Canyon
    sim=DHC6
    model=300
    panel=org
    sound=
    texture=n227sa
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=N227SA
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300"
    ui_variation="Vista Liner"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"

    I know the windows are not big enough - but it gives you an excuse to fly around the Grand Canyon...

    Geoff Shipton

    geoffrey.shipton@sbcglobal.net

    581 downloads

    0 comments

    Submitted

  7. FSX Air Seychelles DeHavilland DHC-6 Twin Otter in "Selebre Sesel" livery

    Generic readme for Eagleskinner repaints - AEROSOFT PAYWARE "DHC-6 Twin Otter X" is needed

    Repaint name: Air Seychelles "Selebre Sesel" livery

    Painter's notes and Installation instructions.

    This paint has been prepared by Chris Brisland

    web: www.eagleskinner.com

    e-mail: christopher@brisland.com

    This paint is for AEROSOFT PAYWARE "DHC-6 Twin Otter X"

    Original copyright for this aircraft with Aerosoft. Please respect copyrights and intellectual property rights.


    NOTES

    INSTALLATION

    This zipfile contains only those textures actually changed during the painting process.

    Open your FSX aircraft folder for this particular download - it will be something like c://Program Files/Microsoft Games/Microsoft Flight Simulator X/Sim Objects/Airplanes/Aerosoft Twin Otter 300

    Extract this zipfile there. Make sure the winzip option "Use Folder Names" is checked. A new sub-folder called "texture.s7aaj" will be created.

    Next open the aircraft.cfg file with any text editor program (Windows editor does the trick) and find the last block of text that starts with a line [fltsim.x] where the x will be a sequential number which starts at flightsim.0 and goes on for as many variants of the model are installed.

    The path to the aircraft configuration file will be:

    c://Program Files/Microsoft Games/Microsoft Flight Simulator X/Sim Objects/Airplanes/Aerosoft Twin Otter 300/aircraft.cfg


    Copy and paste the block of text from below into the aircraft.cfg file and change the x in the first line to the next number up in sequence in your cfg file


    Go flying and enjoy!


    [fltsim.x]
    title=de Havilland Canada Twin Otter Seychelles AAJ
    sim=DHC6
    model=300
    panel=org
    sound=
    texture=s7aaj
    kb_checklists=
    kb_reference=
    atc_id=S7AAJ
    atc_airline=Seychelles
    atc_flight_number=010
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300"
    ui_variation="Isle of Desroches"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"



    #########################
    # Here is a small bonus #
    #########################

    While you are in an editing mood, why not scroll down the aircraft config until you find the last entry "[CameraDefinition.00x]" (It will probably be 006 if Aerosoft didn't change the config from the last beta). NOTE: make sure you find 00x and not just the single digit one. You will note in line 3, that this camera definition is a new virtual cockpiut view...

    Just copy/paste the lines here to after the last existing camera definition entry and change the sequential number to the next in line - as I mentioned above, the last one may be 006, so this one will be 007...

    So next time you go flying, flick through the virtual cockpit views (key "a" when in VC mode) and the new view will show as "Window seat stbd Row 2C" giving you a passenger's eye view of the starboard engine...

    Just a spot of fun...

    [CameraDefinition.00x]
    Title = "Window seat stbd Row 2C"
    Guid = {03710088-6EE0-42ba-80B4-1E92E5700A9A}
    Origin = Virtual Cockpit
    MomentumEffect = No
    SnapPbhAdjust = Swivel
    SnapPbhReturn = False
    PanPbhAdjust = Swivel
    PanPbhReturn = False
    Track = None
    ShowAxis = FALSE
    AllowZoom = TRUE
    InitialZoom = 0.40
    SmoothZoomTime = 2.0
    ZoomPanScalar = 1.0
    ShowWeather = Yes
    XyzAdjust = TRUE
    ShowLensFlare=FALSE
    Category = Cockpit
    PitchPanRate=20
    HeadingPanRate=60
    InitialXyz=0.95, -0.33, -1.73
    InitialPbh=-1.5, 0.0, 86.0

    2018 downloads

    0 comments

    Submitted

  8. Aerosoft Twin Otter VH-BMG

    This folder contains a repaint for the Aerosoft DHC-6 Twin Otter. Repaint by Jan Kees Blom, based on the repaint kit by Aerosoft.
    It should work in both FSX and FS9.

    INSTALLATION

    1. Unzip to a temporary location.

    2. Copy the "texture.VH-BMG" folder to your "Aerosoft Twin Otter 300" directory.

    3. Copy and paste the following text into the aircraft.cfg file inside the "Aerosoft Twin Otter 300" directory (replacing the X with the next numbers in line after your last existing paint scheme - if the last paint scheme already on the list is fltsim.6, this should be fltsim.7)

    [fltsim.x]
    title=de Havilland Canadian Twin Otter BMR
    sim=DHC6
    model=300nh
    panel=org
    sound=
    texture=VH-BMG
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=VH-BMG
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300"
    ui_variation="Bureau of Mineral Resources"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"
    description= repaint by Jan Kees Blom, based on the Aerosoft paintkit


    4. Have fun flying!

    ACKNOWLEDGEMENTS

    The blanks used for this repaint are by Aerosoft. Thanks AEROSOFT, for the great model, wonderful job!!

    LEGAL STUFF

    This repaint is released as FREEWARE. You may use and modify it in any way you wish, but
    you may NOT use it in any kind of money-making endeavor, and you may NOT publicly
    distribute any copies of it, whether modified or not, without my permission. I plan to post this repaint at Avsim and Sim-outhouse. If you find it anywhere else, you can be sure it was posted there without my permission.

    Jan Kees Blom

    CONTACT

    Questions and/or comments about this repaint are always welcome via e-mail at jcblom@ipact.nl.


    24 december 2008

    438 downloads

    0 comments

    Submitted

  9. AeroSoft/Dehavilland Twin Otter Inland Pacific Air

    De Havilland Canadian Twin Otter - "Inland Pacific Air"
    textures for Aerosoft FSX payware model
    Author: Thierry Lustremant (thierry@titus59.info) 27/09/2008

    Installation
    1) Extract all the files to a temporary folder
    2) Copy there folder "texture.VH-IPD" into FSX directory "SimObjects\Airplanes\Aerosoft Twin Otter 300
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 300"
    4) Paste there following text on place above section [General]

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter Inland Pacific Air
    sim=DHC6
    model=300nh
    panel=gps
    sound=
    texture=VH-IPD
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref

    atc_id=VH-IPD
    atc_parking_types=RAMP
    atc_airline=Inland Pacific
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300"
    ui_variation="Inland Pacific Air"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"
    description= Inland Pacific Air now has two Twin Otters, one VH-IPD a 200 Series and VH-TNU a 300 Series. Also has a Cessna 402 c VH-TSI.

    5) Replace the X in [fltsim.X] with the next available number in the aircraft.cfg file i.e if the last entry is 8 change the X to 9.


    Note : Regular passenger operations run to Palm Island, Queensland. Palm Island is 65 km north-east of Townsville, Queensland on the east coast of Australia.

    Thierry

    504 downloads

    0 comments

    Submitted

  10. AeroSoft/Dehavilland Twin Otter Regional Pacific

    De Havilland Canadian Twin Otter - "Regional Pacific"
    textures for Aerosoft FSX payware model
    Author: Thierry Lustremant (thierry@titus59.info) 15/08/2008


    Installation
    1) Extract all the files to a temperary folder
    2) Copy there folder "texture.VH-RPU" into FSX directory "SimObjects\Airplanes\Aerosoft Twin Otter 300
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 300"
    4) Paste there following text on place above section [General]

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter Regional Pacific
    sim=DHC6
    model=300
    panel="org"
    sound=
    texture=VH-RPU
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=VH-RPU
    atc_parking_types=RAMP
    atc_airline=Regional Pacific
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300"
    ui_variation="Regional Pacific Airlines"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"
    description= Regional Pacific Airlines offers extensive airline services in Queensland including Cairns, Townsville, Mt Isa, Bamaga and around the Torres Strait islands.

    5) Replace the X in [fltsim.X] with the next available number in the aircraft.cfg file i.e if the last entry is 5 change the X to 6


    This is my first repaint, so any comments or suggestions are welcome.

    Thierry

    411 downloads

    0 comments

    Submitted

  11. AeroSoft/Dehavilland Twin Otter Sydney Skydiving Centre VH-OTA

    De Havilland Canadian Twin Otter - "Sydney Skydiving Centre"
    textures for Aerosoft FSX payware model
    Author: Thierry Lustremant (thierry@titus59.info) 10/09/2008

    Installation
    1) Extract all the files to a temporary folder
    2) Copy there folder "texture.VH-OTA" into FSX directory "SimObjects\Airplanes\Aerosoft Twin Otter 300
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 300"
    4) Paste there following text on place above section [General]

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter Sydney Skydiving Centre
    sim=DHC6
    model=para
    panel=
    sound=
    texture=VH-OTA
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref

    atc_id=VH-OTA
    atc_parking_types=RAMP
    atc_airline=Sydney Skydiving Centre
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300"
    ui_variation="Sydney Skydiving Centre"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"
    description= VH-OTA flew until 2003. Ride her now for the rebirth of the eagle !

    5) Replace the X in [fltsim.X] with the next available number in the aircraft.cfg file i.e if the last entry is 7 change the X to 8.


    Note : The real VH-OTA had a short nose, but Aerosoft's Twotter model 'para' doesn't exist with DHC-6-100 short nose, so...here she is with a long nose and the eagle ajusted accordingly.

    Thierry

    490 downloads

    0 comments

    Submitted

  12. Aerosoft Twin Otter 300 Modern "ACES"

    De Havilland Canadian Twin Otter 300 Modern - "ACES"

    Author: Matt Gaither (mrgaither54@yahoo.com)

    Place the entire folder labeled "texture.santa" into your fsx/simobjects/airplanes/Aerosoft Twin Otter 300 modern folder.
    Then copy the info below and paste into your 300 modern aircraft.cfg file and replace the "X" with the appropriate number.


    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter ACES
    sim=DHC6
    model=gps
    panel=
    sound=
    texture=aces
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=HK-2540
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300 modern"
    ui_variation="ACES"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"

    585 downloads

    0 comments

    Submitted

  13. Aerosoft Twin Otter 300 Modern "ADA"

    De Havilland Canadian Twin Otter 300 Modern - "ADA"

    Author: Matt Gaither (mrgaither54@yahoo.com)

    Place the entire folder labeled "texture.ADA" into your fsx/simobjects/airplanes/Aerosoft Twin Otter 300 modern folder.
    Then copy the info below and paste into your 300 modern aircraft.cfg file and replace the "X" with the appropriate number.

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter ADA
    sim=DHC6
    model=gps
    panel=
    sound=
    texture=ada
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=HK-2603
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300 modern"
    ui_variation="Aerolínea de Antioquia"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"

    572 downloads

    5 comments

    Submitted

  14. Aerosoft Twin Otter 300 Modern "Bass Master"

    De Havilland Canadian Twin Otter 300 Modern - "Bass Master"

    Author: Matt Gaither (mrgaither54@yahoo.com)

    Place the entire folder labeled "texture.bass" into your fsx/simobjects/airplanes/Aerosoft Twin Otter 300 modern folder.
    Then copy the info below and paste into your 300 modern aircraft.cfg file and replace the "X" with the appropriate number.

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter Bass Master
    sim=DHC6
    model=gps
    panel=
    sound=
    texture=bass
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=BASS
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300 modern"
    ui_variation="Bass Master"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"

    591 downloads

    0 comments

    Submitted

  15. Aerosoft Twin Otter 300 Modern "Santa"

    De Havilland Canadian Twin Otter 300 Modern - "Santa"

    Author: Matt Gaither (mrgaither54@yahoo.com)

    Place the entire folder labeled "texture.Santa" into your fsx/simobjects/airplanes/Aerosoft Twin Otter 300 modern folder.
    Then copy the info below and paste into your 300 modern aircraft.cfg file and replace the "X" with the appropriate number.

    title=de Havilland Canadian Twin Otter Santa
    sim=DHC6
    model=gps
    panel=
    sound=
    texture=santa
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=HK-2603
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300 modern"
    ui_variation="Santa"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"

    409 downloads

    1 comment

    Submitted

  16. Aerosoft Twin Otter 100 Wheels "RAF"

    De Havilland Canadian Twin Otter 300 Modern - "Santa"

    Author: Matt Gaither (mrgaither54@yahoo.com)

    Place the entire folder labeled "texture.RAF" into your fsx/simobjects/airplanes/Aerosoft Twin Otter 100 Wheels folder.
    Then copy the info below and paste into your 100 Wheels modern aircraft.cfg file and replace the "X" with the appropriate number.


    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter RAF
    sim=DHC6
    model=100
    panel=
    sound=
    texture=RAF
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=XJ-K
    atc_parking_types=RAMP, MIL_CARGO, MIL_COMBAT
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-100"
    ui_variation="Royal Canadian Air Force"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft

    449 downloads

    0 comments

    Submitted

  17. Aerosoft Twin Otter - Skybus

    Two Isles of Scilly Skybus repaints G-CBML and G-CEWM, created by me last year. Instructions to add the liveries into the aircraft.cfg file can be found in the Readme.txt.

    1093 downloads

    1 comment

    Submitted

  18. Fictional livery of Luft Nord.

    This is a repaint for the Aerosoft Twin Otter with Wheels/Ski, FSX version. It is in the fictional livery of Luft Nord.

    Luft Nord is a fictional air charter VA based in north Germany at Flensburg (EDXF). It services Norway, Sweden and Germany. Luft Nord is part of the FSAirPark group, please visit http://www.fsairpark.com. This paint has been created by Mark Bradshaw and is used in conjunction with the Luft Nord VA.

    Copy the texture.luft folder to your Aerosft FSX wheel/ski installation and add the contents of the aircraft-cfg.txt to your aircraft.cfg file (changing the x in [FLTSIM.x] to the next number in the sequence).

    The author bears no resonsibility for the file but all measures to ensure it is viruse free have been taken.

    368 downloads

    0 comments

    Submitted

  19. Aerosoft Twin Otter X DHC-6-300 - Brymon Airways

    A repaint of G-BWRB in Brymon Airways livery, circa 1989, used with the "Aerosoft Twin Otter 300". Instructions for editing the aircraft.cfg file are included in the Readme.txt.

    448 downloads

    0 comments

    Submitted

  20. Aerosoft Twin Otter X 300 Modern - Scenic Airlines Pack

    As a complement to Geoff Shipton's "Vista Liner" repaint, I have uploaded my repaints of some of the other aircraft in the old fleet, namely N149SA, N228SA, N241SA, & N253SA. Each paint is different in it's own way, so there is some variety. Instructions for installation are in the included Readme.txt.

    683 downloads

    0 comments

    Submitted

  21. Twin Otter Maldivian Air Taxi (8Q-MAL) - on floats

    -------------------------------------------------------------
    de Havilland Canadian Twin Otter Maldivian Air Taxi (8Q-MAL)
    textures for Aerosoft FSX payware model
    Author: Holgi 07/2009
    -------------------------------------------------------------

    Installation
    ------------

    1) In directory "SimObjects\Airplanes" in your FSX find subdirectory "Aerosoft Twin Otter 100 Floats"
    2) Copy there directory "texture.8Q-MAL" from this archive
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 100 Floats"
    4) Paste there following text on place above section [General]

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter Maldivian Air Taxi (8Q-MAL)
    sim=DHC6
    model=float
    panel=
    sound=
    texture=8Q-MAL
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=8Q-MAL
    atc_airline=MALDIVIAN
    atc_flight_number=003
    atc_parking_types=RAMP
    atc_parking_code=MAT
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-Float"
    ui_variation="Maldivian Air Taxi - (8Q-MAL)"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"
    description="Repaint of MALDIVIAN AIR TAXI by Holgi.\n \nMaldivian Air Taxi is an air taxi service based in Malé in the Maldives. It operates float-equipped Twin Otters on tourist charters throughout the Maldives. Its main base is Malé International Airport.\nThe airline was established in 1993 by Danish investors and started operations in the same year. It is wholly owned by Lars Erik Nielsen (Chairman) and has 275 employees (at March 2007)."


    5) Replace X in [fltsim.X] on beginning of pasted text with number x+1, where
    x is maximum value in [fltsim.x] in your aircraft.cfg







    1764 downloads

    3 comments

    Submitted

  22. Aerosoft Twin Otter 300 Modern "Island Air"

    Aloha Island Air Twotter - N708PV

    1097 downloads

    0 comments

    Submitted

  23. Aerosoft Twin Otter 300 "Royal Hawaiian Air Service"

    Royal Hawaiian Air Service Twotter - N44693

    621 downloads

    0 comments

    Submitted

  24. Twin Otter Maldivian Air Taxi ConradHotels.com Edition (8Q-MAB) - on floats

    -------------------------------------------------------------
    de Havilland Canadian Twin Otter Maldivian Air Taxi (8Q-MAB)
    ConradHotels.com Edition
    textures for Aerosoft FSX payware model
    Author: Holgi 07/2009
    -------------------------------------------------------------

    Installation
    ------------

    1) In directory "SimObjects\Airplanes" in your FSX find subdirectory "Aerosoft Twin Otter 100 Floats"
    2) Copy there directory "texture.conrad" from this archive
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 100 Floats"
    4) Paste there following text on place above section [General]

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter Maldivian Air Taxi (ConradHotels.com)
    sim=DHC6
    model=float
    panel=
    sound=
    texture=conrad
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=8Q-MAB
    atc_airline=MALDIVIAN
    atc_flight_number=002
    atc_parking_types=RAMP
    atc_parking_code=MAT
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-Float"
    ui_variation="Maldivian Air Taxi - (ConradHotels.com)"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"
    description="Repaint of MALDIVIAN AIR TAXI (ConradHotels.com Edition) by Holgi.\n \nMaldivian Air Taxi is an air taxi service based in Malé in the Maldives. It operates float-equipped Twin Otters on tourist charters throughout the Maldives. Its main base is Malé International Airport.\nThe airline was established in 1993 by Danish investors and started operations in the same year. It is wholly owned by Lars Erik Nielsen (Chairman) and has 275 employees (at March 2007)."


    5) Replace X in [fltsim.X] on beginning of pasted text with number x+1, where
    x is maximum value in [fltsim.x] in your aircraft.cfg


    757 downloads

    1 comment

    Submitted

  25. Twin Otter Swiss Federal Office of Topography (T-741)

    --------------------------------------------------------------------
    de Havilland Canadian Twin Otter Swiss Federal Office of Topography
    textures for Aerosoft FSX payware model
    Author: Holgi 07/2009
    --------------------------------------------------------------------

    Installation
    ------------

    1) In directory "SimObjects\Airplanes" in your FSX find subdirectory "Aerosoft Twin Otter 300"
    2) Copy there directory "texture.Swiss_T-741" from this archive
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 300"
    4) Paste there following text on place above section [General]

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter Swiss Federal Office of Topography
    sim=DHC6
    model=300
    panel=org
    sound=
    texture=Swiss_T-741
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=T-741
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300"
    ui_variation="Swiss Federal Office of Topography"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"
    description="Repaint of Swisstopo aircraft by Holgi.\n \nSwisstopo is the common name for the Swiss Federal Office of Topography (in German: Bundesamt für Landestopographie. French: Office fédéral de topographie. Italian: Ufficio federale di topografia. Romansh: Uffizi federal da topografia). This name was chosen as a neutral name to avoid choosing a language when its website was launched in 1997. \n \nAircrafts: \nTwo powerful twin-engined aircraft are available to meet a full range of requirements in Switzerland and abroad.\nSuper King Air 350C and Twin Otter DHC-6-300 \n \n- Applications vertical aerial photography at scales from 1:2500 to 1:60000 \n- platform for projects such as laser scanning and airborne gravimetry \n \nTechnical Details (Twin Otter DHC-6-300): \nOperational ceiling: 8 100 m \nCruising speed: 280 km/h \nMaximum range: 3 200 km \nPayload (with full tank): 950 kg \nMax. takeoff weight: 5 670 kg \nEngines: 2 × 1 652 PS"


    5) Replace X in [fltsim.X] on beginning of pasted text with number x+1, where
    x is maximum value in [fltsim.x] in your aircraft.cfg


    1016 downloads

    0 comments

    Submitted

Sign in to follow this  
×
×
  • Create New...