19 files
-
GSX.cfg for Aerosoft A321 CFM Professional
By egcc
Following on from my A320 file, here's the A321 one.
Installation
Navigate to %APPDATA%\Virtuali\Airplanes Create Aerosoft A320 CFM Professional if it doesn't already exist, otherwise open that folder Create gsx.cfg if it doesn't already exist, otherwise open that file in a text editor (Notepad++ recommended) Paste the code above in to that file, replacing anything already there
Notes
This GSX config will only use belt loaders, as I mainly fly European low cost and short haul and it's rare that they use the bins. Change BELT to AUTO in [cargo1] and [cargo2] if you'd like a mix, or to ULD if you'd just like the bins. No warranty is provided for this file, use it at your own risk and remember to take regular backups - especially if you're changing things!
223 downloads
(0 reviews)Updated
-
(0 reviews)Updated
-
(0 reviews)Updated
-
(0 reviews)Updated
-
(0 reviews)Updated
-
GSX.cfg for Aerosoft A320 CFM Professional
By egcc
A working version of gsx.cfg for Aerosoft A320 CFM Professional.
Installation
Navigate to %APPDATA%\Virtuali\Airplanes Create Aerosoft A320 CFM Professional if it doesn't already exist, otherwise open that folder Create gsx.cfg if it doesn't already exist, otherwise open that file in a text editor (Notepad++ recommended) Paste the code above in to that file, replacing anything already there
Notes
This GSX config will only use belt loaders, as I mainly fly European low cost and short haul and it's rare that they use the bins. Change BELT to AUTO in [cargo1] and [cargo2] if you'd like a mix, or to ULD if you'd just like the bins. No warranty is provided for this file, use it at your own risk and remember to take regular backups - especially if you're changing things!
356 downloads
(0 reviews)Submitted
-
A318/A319 Professional Improved Wind Sound
By eserafinojr
This is a simple update that improves the windscreen sound with an updated sound as well as fine tuned parameters to the wind of both soundsets.
The new sound has a wider stereo image and thus will penetrate the engines and other environment sounds better.
I felt the original wind sound wasn't robust enough and the engines were far too loud at cruise and during the climbout once up to 250+ kts.
Simply install by extracting to your C:\Users\*Account Name Here*\Documents\Prepar3D v4 Add-ons\Aerosoft A318-A319 Professional\SimObjects\Airplanes\Aerosoft A318-A319 Professional Base Folder.
Back up your original sound cfg if you wish to revert. No need to back up the original wind sound as mine has a new file name.
I HIGHLY Recommend that your environment sound slider is set to 100 and the engines at 55 for optimal experience.
Christopher Petersen did a great job with the new IAE and CFM soundsets for the new release. Far better than what is included in the competitions Airbus A32x product as far as pure engine sounds go.
Enjoy guys.
Emil P. Serafino
339 downloads
(0 reviews)Updated
-
XS451 'X' 11 Squadron Lightning T5
By peter197
Made this repaint of XS451 when it had served with 11 Squadron. Enjoy.
Peter
1 download
(0 reviews)Submitted
-
(0 reviews)Submitted
-
Aerosoft Airbus A319 EZDok v2 Profile
By LSDE
Hi !
You can find here my own EZDok v2 Profile for Aerosoft Airbus A319. This is not the final version.
Enjoy
943 downloads
(0 reviews)Submitted
-
Easyjet Airbus Seating and Cargo Plan
By Lucas1781
This is a realistic easyjet passanger and weight load out, hand baggage typically is 20kg for easyjet. The package was made for Aerosoft Airbus A319 and A320 ( A318/19 and A320/21 1.31 ) but it should work on any version including Airbus Extended
Airbus A320
Passenger Max : 180
Passenger Info
Weight : 70kg
Hand Baggage : 20kg
Cargo Max : 9435kg
Airbus A319
Passenger Max : 156
Passenger Info
Weight : 70kg
Hand Baggage : 20kg
Cargo Max : 6985kg
Installation
Simply drop it into '' \Documents\Aerosoft\Airbus\FuelPlanner\AircraftData '' and replace the files inside, make back up if you want.
686 downloads
(0 reviews)Submitted
-
Prepar3D V3 Avatars - Lufthansa Pilot, First Officer & Senior First Officer
By LH1292
German:
In diesen WinRAR-ZIP-Arichiven befinden sich drei verschiedene Avatare, welche einen Lufthansa Piloten, First Officer und Senior First Officer realistisch nachbilden sollen.
Die Original-Texturen stammen ursprünglich von Aerosoft, ich habe lediglich ein paar von ihnen überarbeitet und der Realität angepasst.
Diese Avatare sind nur mit Prepar3D V3 kompatibel!
Installation:
Ziehen Sie einfach den Ordner "Airport_Male_Pilot_Lufthansa" bzw. "Airport_Male_First_Officer_Lufthansa" bzw. "Airport_Male_Senior_First_Officer_Lufthansa" in den Unterordner "Avatars" Ihres Prepar3D V3-Verzeichnises
(z.B. "Computer -> P3D(D:) -> Prepar3D -> SimObjects -> Avatars").
Hinweis:
Manchmal kann es vorkommen, dass die "First Person" Sicht geladen wird und der Avatar nicht sichtbar ist.
In diesem Fall reicht es, wenn man über die Menüleiste in die "Third Person" Sicht wechselt.
Eine Anleitung zur Benutzung und Steuerung der Avatare finden Sie u.a. unter folgendem Link:
http://freeware.aerosoft.com/forum/downloads/Airport_Avatars_Manual_English.pdf
Falls Sie Hilfe benötigen oder eine Frage haben, können Sie sich gerne an mich wenden.
Im Aerosoft Forum können Sie mich unter dem Benutzernamen "LH1292" finden.
Viel Spaß damit
English:
In these WinRAR-Zip archives you can find three different avatars, which are supposed to simulate a real Lufthansa Pilot, First Officer and Senior First Officer.
The original textures are owned by Aerosoft. I have only edited a few of them to make them more realistic.
These avatars are only compatible with Prepar3D V3!
Installation:
Just draw the folder "Airport_Male_Pilot_Lufthansa" or "Airport_Male_First_Officer_Lufthansa" or "Airport_Male_Senior_First_Officer_Lufthansa" into the subfolder "Avatars" of your Prepar3D V3 directory
(for example: "Computer -> P3D(D:) -> Prepar3D -> SimObjects -> Avatars").
Note:
Sometimes it is possible that the "First Person" view is loaded and the avatar is not visible.
In this case you can select the "Third Person" view via the menu bar.
Instructions for using and controlling these avatars can be found at the following link:
http://freeware.aerosoft.com/forum/downloads/Airport_Avatars_Manual_English.pdf
If you need help or have a question, please feel free to contact me.
In the Aerosoft forum you can find me under the user name "LH1292".
Have fun with it
798 downloads
(1 review)Updated
-
Autopilot new sound
By NexXFR
Hey there!
Here is a more real autopilot sound when you disconnect it.
Installation :
Go into your P3D or FSX folder -> SimObjects -> Airplanes -> Aerosoft Airbus A318_A319 Base (Same for A320/21) -> Sound_ASC
Then paste the 2 files into this folder when he will say "do you want to replace it" press Yes.
If you want to listen it, click here
I hope you will enjoy this little modification!
3091 downloads
(0 reviews)Updated
-
AS Airbus X family tweaked Avionics on sound
By ginoleopoldo
A tweaked Avionics On sound for Aerosoft Airbus Family X
Just backup your ASC.AvionicsOn.wav found in Yoursimulator\simobjects\Airplanes\Aerosoft Airbus A318_A319 Base\Sound_ASC or A320_321 Base\Sound_ASC
This sound modify the sounnds you hear when you power up the Airbus from cold and dark applyng Apu power or External power!
Enjoy
1277 downloads
(0 reviews)Submitted
-
Airbus CPDLC display, a few fixes
Added the "NO ACTIVE ATC" message and fixed the bug that the system did not turn off, when the Airbus is cold and dark.
Additionally a second option is avaiable with the display completely turned off, even with power ON, since some airlines do just not turn the panels on when not using the panel.
Paste the extracted content of the CPDLC_ON or CPDLC_OFF folders, depending on which one you want to use, into [FSX/P3D Mainfolder]\SimObjects\Airplanes\Aerosoft Airbus A320_A321 Base\Panel_Fallback\AB_Systems and overwrite the previous files.
If you like my work please consider >>Donating<<
CPDLC displays with NO ACTIVE ATC message:
And with the displays killed:
Please note that the rights to these files still remain with Aerosoft. You are not allowed to redistribute them in any way!
1889 downloads
(0 reviews)Updated
-
Aerosoft Airbus High Definition Virtual Cockpit Textures from Frost77
By Tom A320
Aerosoft Airbus High Definition Virtual Cockpit Textures from Frost77
Screenshots Day Textures:
http://forum.aerosoft.com/index.php?/topic/94035-alternative-vc-textures-darker-with-wear/#entry680405
Screenshots Night Textures:
http://forum.aerosoft.com/index.php?/topic/94035-alternative-vc-textures-darker-with-wear/#entry680407
*** BEFORE REPLACING ANY FILE MAKE SURE TO BACKUP THE ORIGINAL ONES ***
Installation Instructions: 1. Download all 3 parts and extract them into one and the same temporary folder on your hard drive. 2. Copy and Paste "Texture_Fallback_VC" folder to your flight simulator folder: FSX\SimObjects\Airplanes\Aerosoft Airbus A320_A321 Base
3. Copy and Paste two files "AIRBUSX_V2_VC_MAINPANEL_C" and "AIRBUSX_V2_VC_MAINPANEL_L" to your livery folder, e.g.: Texture.AirBerlin_D-ABMS
4. It'very important! Open with notepad fsx.cfg file. It's location: C:\Users\UserNamet\AppData\Roaming\Microsoft\FSX and replace:
TEXTURE_MAX_LOAD=1024
to
TEXTURE_MAX_LOAD=2048
Have a nice Flight!
Thanks, wishes and comments e-mail to: chip_ok@mail.ru
15600 downloads
(10 reviews)Updated
-
Rear Window Fix for Do-27
By Herman
This replacement file fixes the black rear window problem with the Do-27. Tested with FSX, may also work with FS9.
507 downloads
(0 reviews)Updated
-
Aerosoft Airbus A318/319/320/A321 EZdok Profile
By Patrick1246
EZdok Profiles for all Airbus variants
Installation:
-open EZdok, go to File/Load Camera Set, and select the Profile.
20022 downloads
(21 reviews)Submitted
-
Carenado Hawker 850XP EZdok profile
By airbusflyer
This is an EZdok profile for the Carenado Hawker 850XP inspired by a set for the Aerosoft Airbus made by famous "Frooglesim". This profile includes the VC and some external views as well.
It works quite nice for flying. There are no shaking effects inlcuded.
You must own EZCA to use this profile. Tested with the latest release 1.18.6. Should work with P3D as well but not tested.
________________________________
How to use:
1. Start your FSX and load the Hawker 850XP and go to any airport you like
2. Open your EZCA software as you normally do
3. Navigate within EZCA to File.../Load camera set...
4. Choose the downloaded file which is in .ecs format
5. Now EZCA will load the profile and maybe give an warning due the missing "shaking" effects
6. Have fun and enjoy the Hawker
330 downloads
(0 reviews)Updated
-
Download Statistics
-
Files
