Hey Steve,   I think this is not a problem with your Yoke but the normal prop torque creating some noticable tendency rolling the aircraft to the left side. I have noticed this myself in the default C172 using a simple xbox controller so I assume that, if this stable and quite low powered aircraft has this effect, the more powerful aircrafts will have this also but more pronounced depending on model.   But, you can check if your Yoke is causing this in the controller settings for the Yoke, in the menu were you can set the sensitivity curves. On the visual curves display when you center the yoke the ball should be exactly in the middle of the diagram. If this is not the case and it always is slightly to the left you can adjust the center position value until this is fixed (if the Yoke is not cenetring perfectly you can definitvely fix it this way, just needs some fiddling with the setting). Anyway, when you have the input centered in the cockpit, the virtual Yoke of the aircraft should be centered also - if this is the case but the aircraft still banks to the left slightly, it's simply prop torque and I would consider that as normal behaviour.

Hmmm komisch, aber bei mir wirken alle Cockpits stimmig.  

Please login to display this image.

AFL ohne Cockpit Lightning... Mit ist es zu hell.    

Please login to display this image.

Beaver

Hi there,  does anybody out there know how to correct left-leaning tendency with the Honeycomb Alpha Yoke and MSFS 2024?  I hear that I should be able to fly at cruise "hands off" for at least 10 seconds.  Currently, with the Yoke in center position, I move left from 360 degrees, 359, 358 etc.... and the only way I can keep the yoke even is by pressing on the left side of the yoke very slightly with my left ring-finger or pinky and holding it there.   I have heard that this is not a P-factor issue at cruise and it should fly straight.  I have tried to fix the problem by going under "game controllers" in Windows and moving the center circle slightly to the right but that does not work.  There also doesn't appear to be a way in MSFS 2024 to change this under "Settings" and "Controls" as none of the options under "Fine tune your input's curve" such as sensitivity, neutral, dead zone and extremely dead zone apply.   Please advise if possible.  Thx!  Steve Lasner email: slasner857@aol.com

Thank you for the new V2. There are some great improvements. However, I can't get the radio buttons in the pedestal turn on/off anymore. They will rotate, presumably for volume, but the in/out positioning seems to have been eliminated. It's the same for all three radio panels. VATSIM now wants pilots top monitor 121.5 while flying, and with the inoperable buttons I can't get it to monitor COM2 while flying. Am I missing a setting?

In the CRJ 700 this method works for engine 2 (right side) but engine 1 will not spool up past about 20%. Starting in "turnaround" mode. APU is running. Engine 1 start button lights up "starting", throttle to idle at 20%, but no luck getting full start.

Ich habe die Beta installiert und mich am 03.04.25 um 15:00h bei fiktiv eingestelltem Schmuddelwetter....  

Please login to display this image.

  ......in EDNY auf die Platte in der Nähe eines Gebäudes gestellt.   Geladen habe ich die AFL C172 Cessna und habe in den Settings die Aufhellung des Cockpits deaktiviert.  

Please login to display this image.

   

Please login to display this image.

  Dann habe ich die DHC Beaver geladen, die stets immer dunkler war, als alles andere  

Please login to display this image.

  Und zuletzt die KingAir  

Please login to display this image.

  Möglich, daß jetzt die Entwickler nachziehen müßen. Visuell hat Thranda mit der Beaver einen Schub in Richtung helles Cockpit erhalten.   AFL hat bei der C172 bereits vor dem Update ein Menü eingebaut, was den Flieger aus meiner Sicht erheblich aufgewertet hat. Mit der Beta von Aerosoft ist das Cockpit ebenfalls akzeptabel   Bei der KingAir sehe ich derzeit keine erheblichen Vorteile.Wie gesagt, mag am Wetter oder an dem Entwicklungsstand liegen.

Thanks Tang for the comment, but Asobo is responsible for the area around the airport, I only did the airport. When updating, I intend to make changes. In the meantime Although, I would have chosen a better presentation screenshot than the guys in Aerosoft marketing. Well, at least they did it, thank them and Welcome to Dortmund   https://www.aerosoft.com/en/shop/flight/microsoft-flight-simulator/msfs-2020/msfs-sceneries/msfs-europe/4545/aerosoft-airport-dortmund            

Hi, Here is the extracted Lvar's list. CRJV2_Localvars.txt

What simulator are you using ?

Update läuft, kann es kaum erwarten, was es jetzt bedeutet .......