jasonvitsi 0 Posted April 13, 2015 Share Posted April 13, 2015 Hello, i tried to connect with a friend of mine and every time we tried we got a message : conn. error we both downloaded hamachi and tried the ip and a lot other comb. Can anyone write down how a right connection should be established? Link to comment Share on other sites More sharing options...
keithgiannni 25 Posted April 13, 2015 Share Posted April 13, 2015 Great news! Well done Team AS. Just need a nice, shiny, new Frankfurt airport to park the Bus!!! Keith Link to comment Share on other sites More sharing options...
FleetingThought 1 Posted April 13, 2015 Share Posted April 13, 2015 Hi my A320/321 is still stuck at 1.16 version. The Aerosoft Launcher does not update it. If I re-download it from my account at Aerosoft, it is still the 1.16 version. How do I update to this SP3? Thanks. Link to comment Share on other sites More sharing options...
Aerosoft Jonas S. 466 Posted April 13, 2015 Aerosoft Share Posted April 13, 2015 Hello, you have the Airbus X Extended which is not in development anymore. We are talking about the Airbus A320/321 or A318/319. You are eligible for an upgrade price as you own the Extended. Jonas Link to comment Share on other sites More sharing options...
kylep 0 Posted April 13, 2015 Share Posted April 13, 2015 Is Aerosoft bundle a319-321 included? Link to comment Share on other sites More sharing options...
Miksu77 56 Posted April 13, 2015 Share Posted April 13, 2015 This SP3 update covers A318/319/320/321.. Link to comment Share on other sites More sharing options...
jr_andrade 0 Posted April 13, 2015 Share Posted April 13, 2015 Hello friends, i have a question. I bought the Aerosoft - Airbus A320 / A321 ( 1.30 (SP3 ) ) 09/03/2015 . I need to update ? thank you Link to comment Share on other sites More sharing options...
cgentil 163 Posted April 13, 2015 Share Posted April 13, 2015 If you have V1.21 installed, yes you need to update, so many improvements are done. Link to comment Share on other sites More sharing options...
jr_andrade 0 Posted April 14, 2015 Share Posted April 14, 2015 but mine is 1.30, so i dont need it? Link to comment Share on other sites More sharing options...
cgentil 163 Posted April 14, 2015 Share Posted April 14, 2015 When you installed 1.30? Today? If yes everything is fine. Link to comment Share on other sites More sharing options...
barrel_owl 1 Posted April 14, 2015 Share Posted April 14, 2015 but mine is 1.30, so i dont need it? You may have 1.30 only if you downloaded the product today. If you're running the product you bought (and downloaded) on 9.03, you must have 1.21. Run Aerosoft Launcher and you'll see that. Link to comment Share on other sites More sharing options...
idema 0 Posted April 14, 2015 Share Posted April 14, 2015 Hello, good morning from Italy! I have FS2Crew installed. Shall I remove it before upgrade? Thank you! Francesco Link to comment Share on other sites More sharing options...
Emi 5161 Posted April 14, 2015 Share Posted April 14, 2015 No, it's not needed to remove FS2Crew before installing the latest version. Link to comment Share on other sites More sharing options...
DJJose 6 Posted April 14, 2015 Share Posted April 14, 2015 Which shop? I got it sorted out. Link to comment Share on other sites More sharing options...
bob34 14 Posted April 14, 2015 Share Posted April 14, 2015 Best Practise Installing SP3 As with all our Service Packs it only comes in the form of a complete new install. We believe this is best as it brings all users to the same new file base and prevents loads of problems with file fragments of older versions. Here is how we advise you to install it: Use the Control Panel applet to de-install the A318/A319 and/or A320/A321. Delete all remaining Aerosoft Airbus * folders from the FSXMainFolder\SimObjects\Airplane folder. Delete all Airbus * folders from the FSXMainFolder\Aerosoft folder. Reboot your system (seriously good idea and prevents many problems). Log in with Admin rights. Suspend AntiVirus software. Install the Bus. Reboot (to activate the fonts used in the displays) Make sure AntiVirus is running. Defragment your disk (NOT if it's an SSD). Consider doing the Step by Step again. Get beer and enjoy. The plane wasn't flying well at all. Couldn't keep pitch, autopilot was confusing, couldn't navigate properly. After troubleshooting I discovered it was step 12 of the installation instructions. My advice is do not repeat step 12 more than 3 times. Link to comment Share on other sites More sharing options...
chumley 9 Posted April 14, 2015 Share Posted April 14, 2015 Found what I was looking for. Link to comment Share on other sites More sharing options...
cht 0 Posted April 14, 2015 Share Posted April 14, 2015 Hi, I bought the Airbus 318-19-20-21 bundle from www.simw.com and they haven't uploaded SP3 as yet and no answer on the mail as to when they will. :-( Next time I will buy direct from Aerosoft.... /Christian Link to comment Share on other sites More sharing options...
g7usl 22 Posted April 14, 2015 Share Posted April 14, 2015 After SP3 no clickable buttons on LH MCDU. Help please? Link to comment Share on other sites More sharing options...
jeff974 3 Posted April 14, 2015 Share Posted April 14, 2015 i m not able to check the version available on the flightsim store (orbx shop, http://www.flightsimstore.com/). Does anyone has tried to download SP3 from this eshop?. I have sent email to their suppport without answer so far. Link to comment Share on other sites More sharing options...
cht 0 Posted April 14, 2015 Share Posted April 14, 2015 Hi, I bought the Airbus 318-19-20-21 bundle from www.simw.com and they haven't uploaded SP3 as yet and no answer on the mail as to when they will. :-( Next time I will buy direct from Aerosoft.... /Christian Finally www.simw.com answered, but just by saying that their download links point directly to Aerosoft servers, so I should try and download again. So I did and the version is still 1.21 and the installation file is dated 2014-12-17. I wonder is the problem in www.simw.com's end or Aerosoft?? Regards Christian Link to comment Share on other sites More sharing options...
jr_andrade 0 Posted April 14, 2015 Share Posted April 14, 2015 You may have 1.30 only if you downloaded the product today. If you're running the product you bought (and downloaded) on 9.03, you must have 1.21. Run Aerosoft Launcher and you'll see that. Thank you friend, i'll do that today. Link to comment Share on other sites More sharing options...
Wistar 2 Posted April 14, 2015 Share Posted April 14, 2015 Can't find the beer in SP3. Do i have to unzip the sixpack? Link to comment Share on other sites More sharing options...
idema 0 Posted April 14, 2015 Share Posted April 14, 2015 No, it's not needed to remove FS2Crew before installing the latest version. Thank you! Link to comment Share on other sites More sharing options...
Kjell Wennerholm 17 Posted April 14, 2015 Share Posted April 14, 2015 Where can I find this for download? Hi! In your download shop. Log. in and open your 319-318 folder. //kwm Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted April 14, 2015 Author Aerosoft Share Posted April 14, 2015 Finally www.simw.com answered, but just by saying that their download links point directly to Aerosoft servers, so I should try and download again. So I did and the version is still 1.21 and the installation file is dated 2014-12-17. I wonder is the problem in www.simw.com's end or Aerosoft?? Regards Christian There has to be a coms error somewhere as simware is part of Aerosoft now. I'll have it checked out tomorrow morning. However Simware is normally very fast with support and as this product is only out 33 hours I think it's all very acceptable and the term 'finally' might have more to do with your anxiety then the staff, lol. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.