klisura 92 Posted September 21, 2020 Share Posted September 21, 2020 After latest update on A320, p3d 4.5, I got an issue on set Com 1 frequency on saitek radio panel. Has something been modified on radio frequency in A320 with the last update? Just in order to solve with the help of spad.next developer Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted September 21, 2020 Deputy Sheriffs Share Posted September 21, 2020 Hi klisura. All of our aircraft currently uses the 8.33 kHz spacing where the frequencies are read directly from sim via simconnect and then recalculated according to user input and written back directly into sim. So the only change was to change the radios from 25 kHz spacing into 8.33 kHz spacing system. We'll check this on our side as well to compare between different internal versions to see if we can find something that broke this feature. Link to comment Share on other sites More sharing options...
Balu1968 0 Posted September 21, 2020 Share Posted September 21, 2020 Hi The same is with A318 - A321 in P3D v5 HF2 and my VRinsight MCP-Combo and LINDA Thanks Link to comment Share on other sites More sharing options...
klisura 92 Posted September 22, 2020 Author Share Posted September 22, 2020 Mr Ulrich from Spad.Next replied to me: "Nothing i can do on my side. P3D SimConnect limits frequencies to BCD16 with 2 decimals. No extented Frequency handling is known to me for P3D (like e.g. MSFS where it's unlimited)" So do you think is there something Aerosoft on his side can do to fix the issue or should I go back to the previous stable bus version? Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted September 23, 2020 Deputy Sheriffs Share Posted September 23, 2020 22 hours ago, klisura said: Mr Ulrich from Spad.Next replied to me: "Nothing i can do on my side. P3D SimConnect limits frequencies to BCD16 with 2 decimals. No extented Frequency handling is known to me for P3D (like e.g. MSFS where it's unlimited)" So do you think is there something Aerosoft on his side can do to fix the issue or should I go back to the previous stable bus version? Is he talking about prior v5? With v5 the new spacing was introduced into the sim and the sdk updated. And as we read and write direct to sim connect it shouldn’t also be a problem for him. Link to comment Share on other sites More sharing options...
barrendrop3 14 Posted September 23, 2020 Share Posted September 23, 2020 I am on P3Dv4.5 and it all worked perfectly till the new Aerosoft update, now the freq will change if I do it in the sim virtual cockpit and and chane on the Saitek rasio panel, but it will not be controlled via the panel anymore regards Derek Link to comment Share on other sites More sharing options...
klisura 92 Posted September 23, 2020 Author Share Posted September 23, 2020 5 hours ago, masterhawk said: Is he talking about prior v5? With v5 the new spacing was introduced into the sim and the sdk updated. And as we read and write direct to sim connect it shouldn’t also be a problem for him. No, I'm running p3d 4.5 as written in the first post Link to comment Share on other sites More sharing options...
klisura 92 Posted September 23, 2020 Author Share Posted September 23, 2020 2 hours ago, barrendrop3 said: I am on P3Dv4.5 and it all worked perfectly till the new Aerosoft update, now the freq will change if I do it in the sim virtual cockpit and and chane on the Saitek rasio panel, but it will not be controlled via the panel anymore regards Derek Same here, I'll roll back to the last stable bus version Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted September 23, 2020 Deputy Sheriffs Share Posted September 23, 2020 17 minutes ago, klisura said: No, I'm running p3d 4.5 as written in the first post Ok, sorry. Mixed some things up. Link to comment Share on other sites More sharing options...
barrendrop3 14 Posted October 1, 2020 Share Posted October 1, 2020 Anybody got this working yet, is it the LARS in Spadnext that need updating to have the new frequency spacing? Link to comment Share on other sites More sharing options...
klisura 92 Posted October 2, 2020 Author Share Posted October 2, 2020 22 hours ago, barrendrop3 said: Anybody got this working yet, is it the LARS in Spadnext that need updating to have the new frequency spacing? No, there's nothing Spad.Next can do on his side. If aerosoft doesn't fix it the only thing to do is to roll back to the stable version (1.3.1.0) as I did Link to comment Share on other sites More sharing options...
SeaJunk 8 Posted October 11, 2020 Share Posted October 11, 2020 Chiming in with the same issue. Logitech (saitek) radio panel with logitech driver on P3D V4. A318-A321, A330. The numbers flicker on the panel but do not change in the cockpit. Changing the freq in the cockpit does change the numbers on the panel. Rolled back to last stable busses fixes it. Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted October 14, 2020 Deputy Sheriffs Share Posted October 14, 2020 We are aware of this issue and we are looking into it. Link to comment Share on other sites More sharing options...
klisura 92 Posted November 2, 2020 Author Share Posted November 2, 2020 On 10/14/2020 at 10:15 PM, Secondator said: We are aware of this issue and we are looking into it. Hi Secondator, do you know if this bug has been fixed with the latest 1.4.1.1? Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted November 2, 2020 Deputy Sheriffs Share Posted November 2, 2020 Hello klisura, No. We are still looking into it trying to understand what the issue could be. Unfortunately there has been a small delay with this due to other priorities that we had to work out first. Link to comment Share on other sites More sharing options...
Wise87 63 Posted November 11, 2020 Share Posted November 11, 2020 On 10/11/2020 at 6:00 PM, SeaJunk said: Chiming in with the same issue. Logitech (saitek) radio panel with logitech driver on P3D V4. A318-A321, A330. The numbers flicker on the panel but do not change in the cockpit. Changing the freq in the cockpit does change the numbers on the panel. Rolled back to last stable busses fixes it. FYI, I also have this issue with the radio panel. Not sure if this helps but the MadDog also updated to 8.33 Khz but they allow users to revert back to 25 Khz by making a change in the ini file to 833KHz=0 and users can use their radio panels again. Link to comment Share on other sites More sharing options...
Rosko 2 Posted November 13, 2020 Share Posted November 13, 2020 Discovering that my previously working radio panel doesn’t change frequencies the day before the Cross the Pond is not fun. ive been messing around in Spad next trying to change to 8.33khz and all kinds of stuff to no avail. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted November 13, 2020 Deputy Sheriffs Share Posted November 13, 2020 19 minutes ago, Rosko said: Discovering that my previously working radio panel doesn’t change frequencies the day before the Cross the Pond is not fun. ive been messing around in Spad next trying to change to 8.33khz and all kinds of stuff to no avail. Problem is solved internal fix is in testing. Link to comment Share on other sites More sharing options...
Rosko 2 Posted November 13, 2020 Share Posted November 13, 2020 44 minutes ago, masterhawk said: Problem is solved internal fix is in testing. Great news. I take it that it won’t be ready for tomorrow tho. Link to comment Share on other sites More sharing options...
Brianwhtn53 7 Posted November 13, 2020 Share Posted November 13, 2020 no, 2-3 weeks according to another post Link to comment Share on other sites More sharing options...
klisura 92 Posted November 21, 2020 Author Share Posted November 21, 2020 Did the new v. 1.4.1.1 fix the issue? I'd like to know if I can update Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted November 21, 2020 Aerosoft Share Posted November 21, 2020 No, this is still being tested. It is hugely complex. Link to comment Share on other sites More sharing options...
BAW326 0 Posted December 5, 2020 Share Posted December 5, 2020 Thanks for update. Great Job!!! Greetings Knut Link to comment Share on other sites More sharing options...
barrendrop3 14 Posted January 22, 2021 Share Posted January 22, 2021 The latest update has fixed the radio panel for me ver 1.4.1.2 Link to comment Share on other sites More sharing options...
Dave Gray 12 Posted January 27, 2021 Share Posted January 27, 2021 guys what Ini file needs to be changed and where is it located? I've had to do a similar change in the MD80 in the past. I just need to know what file needs to be changed here. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.