Deputy Sheriffs masterhawk 799 Posted May 18, 2016 Deputy Sheriffs Share Posted May 18, 2016 vor 11 Minuten, Jetset sagte: Can I use it for FSX too or just for P3D? You have to try it out. But backup your original file. The FSX SDK gave me an error, that's the reason why I used P3D. Maybe Er!k can create a FSX version. Link to comment Share on other sites More sharing options...
chkl 34 Posted May 18, 2016 Share Posted May 18, 2016 9 hours ago, masterhawk said: Hi, here you find my version of Er!ks AFCAD with the changes to ILS12. Changelog v1.3.1: - Increased range of ILS12 from 10NM to 27NM (now it is like all other ILS of LKPR) - Changed postition of DME PA (ILS12) to the position of the glideslope emitter - Aligned localizer ILS12 with centerline of runway12 It is again compiled with P3D v3.2 SDK LKPR_ADEP3_MS v1.3.1.zip Please login to display this image. Can everyone making afcad changes do it to the latest patch afcad file? Or is this file still ok to replace after installing the latest installer? Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted May 18, 2016 Deputy Sheriffs Share Posted May 18, 2016 vor 19 Minuten, gear up and off sagte: Can everyone making afcad changes do it to the latest patch afcad file? Or is this file still ok to replace after installing the latest installer? Hi I used Er!ks v1.3 which was compatible to 1.01. So my versions should also be compatible. If in the scenery noting major is changed the afcad should work with every version of the scenery. You can always change something in the AFCADs of your payware or freeware sceneries. You need ADE and the corresponding SDK. Most AFCADs are not very detailed and contain errors. Like this one (original version). Link to comment Share on other sites More sharing options...
Er!k 572 Posted May 18, 2016 Author Share Posted May 18, 2016 Here is version 1.4! Compatible with Prague v1.1 both for FSX and P3D Changelog v1.0: - Added gate types (gate, cargo, mil_cargo) - Added airline codes according to their terminals including a special code for the Emirates A380 (UAES) - Fixed all hold short nodes - Adjusted runway starting points - Added taxiways (E, M, Z) - Renamed taxiway P2 to P Changelog v1.1: - Added parking code for KLM (KLC was already available) - Changed starting point of RWY 12 Changelog v1.2: - Added parking code for GWI (only EWG was available) - Updated all radius accoring to AIG standards - Increased A380 gate radius Changelog v1.3: - Added hold short nodes at taxiway D and F (west of 12/30) - Added pushback instructions for all gates for GSX use Changelog v1.4: - Updates RWY12 ILS according to masterhawk (thanks!) - I cannot fix the 'visual runway'approaches' instead of ILS. I guess this is up to Premek. LKPR_ADEX_XHT_DFLT v1.4.zip Link to comment Share on other sites More sharing options...
Jetset 9 Posted May 18, 2016 Share Posted May 18, 2016 Thanks a lot Er!k, really appreciate your quick work. I hope Premek will fix the issue wit the missing ILS approaches Link to comment Share on other sites More sharing options...
Er!k 572 Posted May 18, 2016 Author Share Posted May 18, 2016 2 hours ago, masterhawk said: Hi I used Er!ks v1.3 which was compatible to 1.01. So my versions should also be compatible. If in the scenery noting major is changed the afcad should work with every version of the scenery. You can always change something in the AFCADs of your payware or freeware sceneries. You need ADE and the corresponding SDK. Most AFCADs are not very detailed and contain errors. Like this one (original version). Hi Masterhawk; I found this thread: maybe worth a try to get back the ILS approaches: http://www.fsdreamteam.com/forum/index.php?topic=3668.0 Can you try? I do not have ADE installed. Link to comment Share on other sites More sharing options...
chkl 34 Posted May 18, 2016 Share Posted May 18, 2016 West of runway 12/30 on Taxiway D, you do not need a hold short node as the taxi apron path does not intersect the runway it crosses it. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted May 18, 2016 Deputy Sheriffs Share Posted May 18, 2016 Vor 1 Stunde, Er!k sagte: Hi Masterhawk; I found this thread: maybe worth a try to get back the ILS approaches: http://www.fsdreamteam.com/forum/index.php?topic=3668.0 Can you try? I do not have ADE installed. I already looked to that item in the ADE support forum. I will try it, but it will take some time. http://www.fsdeveloper.com/forum/threads/tutorial-approach-legtype-definitions-and-attached-picture.13751/ http://www.fsdeveloper.com/forum/threads/tutorial-approaches.14074/ Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted May 18, 2016 Deputy Sheriffs Share Posted May 18, 2016 Vor 1 Stunde, gear up and off sagte: West of runway 12/30 on Taxiway D, you do not need a hold short node as the taxi apron path does not intersect the runway it crosses it. Are you sure? Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
chkl 34 Posted May 18, 2016 Share Posted May 18, 2016 1 hour ago, masterhawk said: Are you sure? Please login to display this image. Please login to display this image. In the afcad program I can see the developer did not link the taxiway and runway links I assume to help the flow of AI aircraft taxing to the gate after just landing on 24 Link to comment Share on other sites More sharing options...
DutchPilot 0 Posted May 18, 2016 Share Posted May 18, 2016 Thanks Er!k for the efforts you make, however, your AFCAD file doesn't improve anything for me. Still missing textures for runways, taxiways, jetways, etc. I added the file to the scenery folder of the mega airport prague folder. This should be the right thing to do right? Niels van Iterson Link to comment Share on other sites More sharing options...
Er!k 572 Posted May 18, 2016 Author Share Posted May 18, 2016 Hi Niels, this AFCAD will only adjust parking positions, improve AI traffic flows etc. This has nothing to do with missing textures. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted May 18, 2016 Deputy Sheriffs Share Posted May 18, 2016 Good evening, here you get the next version. Changelog v1.4.1: - Updates RWY24 ILS to CAT III - Added ILS approches to all runways (very basic, needs further tweaking to match the charts) @Er!k: In the picture you see some missing lines (Taxiway D/F near RWY12) marked. And in the pdf are the faults listed, found by ADE. Maybe you can investigate them. Open tasks: - investigate faults - add missing intersections - update basic to advanced ILS approaches ---> not easy, @Premek: something for you? - add the RNAV, NDB and VOR approaches --> not easy, @Premek: something for you? LKPR_ADEP3_MS v1.4.1.zip Faults.pdf Please login to display this image. Link to comment Share on other sites More sharing options...
f.skywalker 17 Posted May 19, 2016 Share Posted May 19, 2016 Hi Masterhawk, thanks for your work.. the name of version 1.4 - LKPR_ADEX_XHT_DFLT.bgl ( work at my scenery) the name of version 1.4.1- LKPR_ADEP3_MS.bgl is this working with the name or must i rename ist. Frank Link to comment Share on other sites More sharing options...
Er!k 572 Posted May 19, 2016 Author Share Posted May 19, 2016 If you want to try Masterhawks version; rename the LKPR_ADEX_XHT_DFLT.bgl to LKPR_ADEX_XHT_DFLT.off and place the LKPR_ADEP3_MS.bgl file in the same location. If you leave LKPR_ADEX_XHT_DFLT.bgl as it is you will have 2 AFCADS. Link to comment Share on other sites More sharing options...
f.skywalker 17 Posted May 19, 2016 Share Posted May 19, 2016 Hi Erik, thanks. I understand. The various names have me confused . I would always stay with the same name as the original+Version Name Frank Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted May 19, 2016 Deputy Sheriffs Share Posted May 19, 2016 vor 2 Stunden , f.skywalker sagte: Hi Erik, thanks. I understand. The various names have me confused . I would always stay with the same name as the original+Version Name Frank Off topic but for your background. The name of the AFCAD offers some information: The ICAO code is self explanatory ADEX means, it was created using ADE and the FSX SDK ADEP3 means, it was created using ADE and the P3Dv3 SDK MS are the Initials of the developer. This is the way ADE creates the filename. Of course you can change that filename, but I used the P3Dv3 SDK, and that information may be important. It is possible that this file works in FSX as good as in P3D, you have to test that. Feedback for other users would be great. Link to comment Share on other sites More sharing options...
yushpe 3 Posted May 19, 2016 Share Posted May 19, 2016 Hello experts Er!k & Masterhawk! Sorry for my low English level, try to understand what you write through the Google translator. So: I watch after subsequent alterations AFCAD this problem. This aircraft lined up in a row and formed the problem of runway 12. drive the taxiing P, deployed and returning on runway 12, disturbing others. Please login to display this image. I Looked AFCAD and found that Desinators is "Blank". It is right? Please login to display this image. Please login to display this image. Check, please! (...When the wind was 300 degrees when approaching the ILS30). Best regards to you and to all forum users! Lev Link to comment Share on other sites More sharing options...
ca210270 4 Posted May 19, 2016 Share Posted May 19, 2016 So which one of the two AFCADs is better? Link to comment Share on other sites More sharing options...
chkl 34 Posted May 19, 2016 Share Posted May 19, 2016 Airport scenery version 1.02. Can the latest afcad be used? Thanks. Link to comment Share on other sites More sharing options...
data63 421 Posted May 19, 2016 Share Posted May 19, 2016 On 17.5.2016 at 22:07, masterhawk sagte: Hi, here you find my version of Er!ks AFCAD with the changes to ILS12. Changelog v1.3.1: - Increased range of ILS12 from 10NM to 27NM (now it is like all other ILS of LKPR) - Changed postition of DME PA (ILS12) to the position of the glideslope emitter - Aligned localizer ILS12 with centerline of runway12 It is again compiled with P3D v3.2 SDK LKPR_ADEP3_MS v1.3.1.zip Thanks for your efforts! - great job maybe you could add the ADE XML-File so FSX users can compile the bgl from that avoiding possible incompatibilities Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted May 19, 2016 Deputy Sheriffs Share Posted May 19, 2016 vor 14 Minuten, ca210270 sagte: So which one of the two AFCADs is better? The higher version number contains the most fixes independent if it is from Er!k or me. My 1.x.1 allways used the latest from Er!k. But my version was compiled for P3D. You can test if it works in FSX. Normally you can't damage anything if it's not working. Just go back to a FSX version. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted May 19, 2016 Deputy Sheriffs Share Posted May 19, 2016 vor 20 Minuten, gear up and off sagte: Airport scenery version 1.02. Can the latest afcad be used? Thanks. I don't have the latest changelog. But I think it should work as long as the scenery wasn't moved or the altitude changed. I think the fixes1.02 are the APC and the Autogen. So the AFCAD should work. If not, go back to the original version. You won't damage anything. vor 11 Minuten, data63 sagte: Thanks for your efforts! - great job maybe you could add the ADE XML-File so FSX users can compile the bgl from that avoiding possible incompatibilities I will do, but it takes some time. Link to comment Share on other sites More sharing options...
chkl 34 Posted May 19, 2016 Share Posted May 19, 2016 28 minutes ago, masterhawk said: I don't have the latest changelog. But I think it should work as long as the scenery wasn't moved or the altitude changed. I think the fixes1.02 are the APC and the Autogen. So the AFCAD should work. If not, go back to the original version. You won't damage anything. I will do, but it takes some time. Thanks. Can I use the p3d afcad in fsx? Have you heard any bugs if doing this? Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted May 19, 2016 Deputy Sheriffs Share Posted May 19, 2016 vor 14 Minuten, gear up and off sagte: Thanks. Can I use the p3d afcad in fsx? Have you heard any bugs if doing this? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.