We got a new video from World of Aircraft: Glider Simulator and are asking for some alpha/beta testers! Check this post.

 

Jump to content
Fabian Boulegue

Request an Train/Bus/Airport/Aircraft/Tool thread

Recommended Posts

Nobody does KBUR Bob Hope Burbank airport for FSX  :(  :(   :(  

Share this post


Link to post
Share on other sites
On 11/6/2019 at 3:00 PM, Aharon said:

Nobody does KBUR Bob Hope Burbank airport for FSX  :( :(   :(  

 

There was a rumor ORBX would do it, but so far I can't find any source for it.

On 11/6/2019 at 2:51 PM, Bisket15 said:

Hi guys,

 

Would there be a possibility to create Orlando-Sanford Airport (KSFB)? It is quite an important hub for airlines such as TUI, Thompson and allegiant who fly there often.

 

I think that it would be a great addition to the Aerosoft scenery list, as there are no addon scenery's of this airport in neither X-plane or P3D (except for one low quality one)

 

Hope you will seriously consider this!

 

So do I, however there might be a possibility for LatinVFR to do it. No promise though, but he does live in Orlando and is planning to do Orlando International. Maybe he'll make the project a bit broader and include Sanford as well.

Share this post


Link to post
Share on other sites

I Request The Following Addons:

 

Aerosoft Maldives Professional (Rewrite from Old Version to New) for Prepar3D V4.5 HF1 and Above
Aerosoft Airbus A380 Professional for Prepar3D V4.5 HF1 and Above

 

Please Do It Immediately After Airbus A330 Professional, @Mathijs Kok!

Share this post


Link to post
Share on other sites
8 minutes ago, AhmedAhzaam18 said:

I Request The Following Addons:

 

Aerosoft Maldives Professional (Rewrite from Old Version to New) for Prepar3D V4.5 HF1 and Above
Aerosoft Airbus A380 Professional for Prepar3D V4.5 HF1 and Above

 

Please Do It Immediately After Airbus A330 Professional, @Mathijs Kok!

 

Hi AhmedAhzaam18,
 Is there anyone who greatly desires the A380 Professional for P3D v4 it saw me and many others. 

I used to ask Aerosoft (Mathijs Kok) if they couldn't make the A380, but it seems there is some information about the Airbus A380 that Aerosoft can't get hold of.

Why not give this information I do not know but I think we can all agree that it is a pity that they can not afford / get the info they need to make the A380.

This may be a matter of time, if not that it may never turn into something. But we have to be confident and see what happens in the future

But I understand very well that we all wanted the king over the air in P3D v4,  But right now we just have to hope that one day, Aerosoft will get the Info and permission to make the A380.

 

Best Regards
Jammin16

Share this post


Link to post
Share on other sites

And as far as I know FSDG is in the process of making the Maldives, or at least the major airport Male. Not sure about the rest of the islands.

 

Share this post


Link to post
Share on other sites

How about this one?

 

https://matadornetwork.com/read/worlds-largest-airport-will-open-china-2019/

 

Seems like a challenge :-)

  • Thanks 1

Share this post


Link to post
Share on other sites

Yes, that is the one I was looking for. Did not know it was already modelled into a flightsim.
I guess this saves me a trip to China...😉

Thanks for telling

Share this post


Link to post
Share on other sites

Now we have speak so much about aircraft e.g. A330 Pro and the New CRJ. So I think now I would like to ask after a new airport Seoul Incheon Intl (RKSI) It's could be nice B)

 

I have also a question was there not som thing about Aerosoft work on Singapore Intl Airport (WSSS)???

 

I know things take time but I missing some new and big, as a the A330pro B)

 

Share this post


Link to post
Share on other sites

I request an announcement of a new plane to be developed. We need a new topic in "Previews of Unreleased Products" forum to post in :D

Share this post


Link to post
Share on other sites
7 hours ago, snapshot21 said:

I request an announcement of a new plane to be developed. We need a new topic in "Previews of Unreleased Products" forum to post in :D

 

We do not currently have a new aircraft to announce. We are working very hard on updating the A318/A319/A320/A321 and A330 Professional products.

 

Best wishes.

 

Share this post


Link to post
Share on other sites

332 and/or 343 please!!!! day 1 purchase, for sure

On 1/1/2020 at 2:29 PM, Balogh Ádám said:

A330-200, please!

 

  • Like 2

Share this post


Link to post
Share on other sites
15 hours ago, jotaedo said:

332 and/or 343 please!!!! day 1 purchase, for sure

 

Do you mean A330-200 and A340-300???

Share this post


Link to post
Share on other sites

Are there any plans to build Eastern Russian airports? For example Vladivostok (UHWW), Kamchatka  (UHPP) or Sakhalin (UHSS)?  

  • Like 2

Share this post


Link to post
Share on other sites

Hi every one and Aerosoft.

Now I'm really annoyed that I can't use Bali X for P3D v4. But it also makes good sense that when I go to the Bali X purchase page that it says this is for FSX, FSX: SE, P3D v3. 

But honestly, I think it's bad that this doesn't turn into P3D v4. I like to pay $ 199.99 extra to get some airports made compatible with the P3D v4. 

It's really sad that you lost so many good airports when you switched to P3D v4. I know it's not Aerosoft that makes P3D v4 but I honestly think something needs to happen inside this. 

I'm not blaming aerosoft for anything, but I'd say I want some airports to be updated to P3D v4. Aerosoft are not the ones who got this message I intend to take it to Flytampa and Taxi2Gate.

 

 

But I would also say that P3D could make it easier for you aircraft and airport programmer.

Share this post


Link to post
Share on other sites
12 minutes ago, Jammin16 said:

Hi every one and Aerosoft.

Now I'm really annoyed that I can't use Bali X for P3D v4. But it also makes good sense that when I go to the Bali X purchase page that it says this is for FSX, FSX: SE, P3D v3. 

But honestly, I think it's bad that this doesn't turn into P3D v4. I like to pay $ 199.99 extra to get some airports made compatible with the P3D v4. 

It's really sad that you lost so many good airports when you switched to P3D v4. I know it's not Aerosoft that makes P3D v4 but I honestly think something needs to happen inside this. 

I'm not blaming aerosoft for anything, but I'd say I want some airports to be updated to P3D v4. Aerosoft are not the ones who got this message I intend to take it to Flytampa and Taxi2Gate.

 

 

But I would also say that P3D could make it easier for you aircraft and airport programmer.

 

Thankfully there is an abundance of airport and other scenery available for P3Dv4.... my hard drives are full of scenery! 

 

Now don't kill the messenger.... but I believe that P3Dv4 will likely be all but dead within the flight sim community in about one year due to Microsoft releasing the upcoming sim.  As such, most larger developers have all but stopped development for P3Dv4.  I would not be surprised, I would be absolutely SHOCKED (with flames coming off it) if Lockheed Martin didn't move from P3D to a commercial version of the upcoming MS sim.  But until that happens, flight simmers like me will still be using P3Dv4 and still buying addons for it because we love to fly!

 

This has happened many times over the 40 years the flight sim world has existed, and it will happen again as well.

 

Share this post


Link to post
Share on other sites
22 minutes ago, DaveCT2003 said:

 

Thankfully there is an abundance of airport and other scenery available for P3Dv4.... my hard drives are full of scenery! 

 

Now don't kill the messenger.... but I believe that P3Dv4 will likely be all but dead within the flight sim community in about one year due to Microsoft releasing the upcoming sim.  As such, most larger developers have all but stopped development for P3Dv4.  I would not be surprised, I would be absolutely SHOCKED (with flames coming off it) if Lockheed Martin didn't move from P3D to a commercial version of the upcoming MS sim.  But until that happens, flight simmers like me will still be using P3Dv4 and still buying addons for it because we love to fly!

 

This has happened many times over the 40 years the flight sim world has existed, and it will happen again as well.

 

Man!
I hate this flight sim world!!! There is nothing but competition, competition, competition, competition. First it was FS2004, FSX, then it became FSX: SE, then came P3D v2 then came X-plane, then came P3D v3 then came X-Plane 10, then came X-plane 11 Then came P3D v4, and now you are over for something it's just throwing out the window like X-Plane 10 and 11. There is a reason I stick to P3D and that is because I think there is nothing more better than P3D. 

 

But then I have to address some others who would be fighting the new Microsoft Fligth Sim.

 

Share this post


Link to post
Share on other sites

Good day gentlemen,

    Lately, Jeddah Intl. Airport got huge updates and it received a new terminal that opened last year. But yet we Saudi simmers don’t have the latest updates and the only scenery for OEJN is made by BDOAviation in 2015 without further updates. So we kindly suggest to think of making this scenery for P3D and FS2020. Because your developers are one of the best out there in scenery development.
• Pictures attached are credited to Sam Chui.

 

@Mathijs Kok Saudi GACA would let you do some photo shooting as they allowed Sam Chui in the first place.

I don't think it's an issue

 

Please private message me, if any deep info needed.

 

Sam Chui's Video: 

 

 

Previous Thread: https://forum.aerosoft.com/index.php?/topic/151288-mega-airport-scenery-request/

 

3F0768EF-69B8-4874-9909-CBE461B93638.jpeg

10841629-DBF1-470C-9151-1E25667D6089.jpeg

5643229D-D73D-4A2C-9953-F239C2BBAD40.jpeg

40875ACE-710B-4005-B126-00B26C8E3E09.jpeg

E5F864F5-0BB0-43DA-9308-C78F8EAD4945.jpeg

8A0986B1-0BBD-42CE-8DE7-069AFDDA3B26.jpeg

 

Share this post


Link to post
Share on other sites

Has Aerosoft considered to develop a proper business jet With their quality standards?

  • Upvote 1

Share this post


Link to post
Share on other sites

i team @ Aerosoft.

 

Since in Lockdown, i have been thinking a lot about it and wanted to suggest the idea if it takes traction of course.

I have been purchasing your products and i must admit, they are formidable products, at least a champion for creating Airbus Planes.

Most of North Americans are concentrating their efforts on creating Boeing aircrafts for flight simulation community. I and perhaps others thank you for allowing us to fly European birds.

Your portfolio is good and we wish to have new joiners in the family. This lead me to ask this question and maybe others have already done that.

What is the overall cost of New developpement for a new plane? man/hours.

Given the fact that most simmers would like to have new planes. What is the amount of commitment you want to get from potential buyers to start a project?

For example: conducting an online survey to know which products can attract sufficient interested persons, and invest a reasonable amount of money so you can start working on that project. Knowing that at the end of the cycle, the product will sell well among simmers from mouth to ears?

Take this as a Groupon style influence buying.

My Idea is: A340-300, since A350( maybe the available data does make it easy to model it as much as you would like)

 

Thanks and stay safe.

Regards

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...