Fizzelle 0 Posted July 15, 2017 Share Posted July 15, 2017 12 minutes ago, OPabst said: I don't know, if there is a free (or in a acceptable pricelevel) source for a better mesh of Madeira available. I also don't know, what resolution the FTX Global mesh has for Maderia. But when another meshaddon with a higher LOD level is installed, the FSX/P3D will use that one, independet in which Layer of the Scenery Library it is installed. While other scenery content is loaded by the layerorder, meshes are loaded by the LOD Level. I attach a screenshot showing the ORBX default recommended settings for OpenLC Europe for FTX Global. Please login to display this image. Link to comment Share on other sites More sharing options...
mckayi 10 Posted July 15, 2017 Share Posted July 15, 2017 Wow thanks for the quick fix, Its close enough to the ground that you do not notice the float unless you really look. Will this file be in the next update or just used if I notice it again? Thanks Again Please login to display this image. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted July 16, 2017 Deputy Sheriffs Share Posted July 16, 2017 Hello, I want to share some fixes for Madeira 1.05a. My source data is SRTM 1 arc-second recompiled to LOD 11. It should work for FSX/P3D1,2,3,4. 1. Adds missing Mesh for Ilhéu do Farol removed Copy to "Prepar3D v4\Ecosystem\Aerosoft\MadeiraXEvolution\SCENERY" 2. Adds higher LOD Mesh for Ilheu Da Fonte Da Areia, now it's beeing displayed. removed Copy to "Prepar3D v4\Ecosystem\Aerosoft\PortoSantoXEvolution\Scenery" @MK-Studios feel free to use it in 1.06 follow up here: Link to comment Share on other sites More sharing options...
Fizzelle 0 Posted July 16, 2017 Share Posted July 16, 2017 And following on from previous posts, I am happy to report that ORBX FTX Vector ( released today) works flawlessly with this scenery, with no loss of framerates. Link to comment Share on other sites More sharing options...
Flightplayer 113 Posted July 17, 2017 Share Posted July 17, 2017 9 hours ago, masterhawk said: Hello, I want to share some fixes for Madeira 1.05a. My source data is SRTM 1 arc-second recompiled to LOD 11. It should work for FSX/P3D1,2,3,4. 1. Adds missing Mesh for Ilhéu do Farol LPMA_Terrain_missing LOD11 by Bob.bgl Copy to "Prepar3D v4\Ecosystem\Aerosoft\MadeiraXEvolution\SCENERY" 2. Adds higher LOD Mesh for Ilheu Da Fonte Da Areia, now it's beeing displayed. Meshfix LOD 11 by Bob.bgl Copy to "Prepar3D v4\Ecosystem\Aerosoft\PortoSantoXEvolution\Scenery" @MK-Studios feel free to use it in 1.06 Awesome! Thank you! Link to comment Share on other sites More sharing options...
Curtis Jarrett 1 Posted September 7, 2017 Share Posted September 7, 2017 Had a clean install of Madeira X Evolution. Are there supposed to be four (4) steady lights just after the curved lead-in flashing lights on approach to 05? FSX Orbx Global (no Vector) Thank you, Curtis Jarrett Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted September 7, 2017 Deputy Sheriffs Share Posted September 7, 2017 Curtis, please do not highjack a topic with another question, but open your own topic. Thanks Link to comment Share on other sites More sharing options...
Padrinho 0 Posted October 17, 2017 Share Posted October 17, 2017 Hi, good afternoon. I have Madeira X and i run it on FSX Steam with REX4, FTX Global and Europe LC. Recently i have experienced some issues with this marvellous scenery: -Runway changes textures depending on the view, cirlcling around views solves the problem but its there and very noticeable after being pushed back from any stand or by taxying to Rwy05, -On MJC Dash8 Q400 display Madeira island shows up like bellow, with other add ons like Tropicalsim Azores islands it doesn't happen like this, the landclass is shown correctly on the aircraft radar display. -How can i efectively remove Aerosoft AI traffic from MAdeira X? Thank you very much. Regards. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Dougal 2 Posted January 31, 2018 Share Posted January 31, 2018 Hi Guys Maybe the answer is in here somewhere, but this a looooong thread;-) Will the scenery run in P3Dv4 ? Thanks EDIT: I dont have Orbx Vector but DO have Orbx Global installed Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted January 31, 2018 Deputy Sheriffs Share Posted January 31, 2018 2 hours ago, Dougal said: Hi Guys Maybe the answer is in here somewhere, but this a looooong thread;-) Will the scenery run in P3Dv4 ? Thanks EDIT: I dont have Orbx Vector but DO have Orbx Global installed Yes, it is compatible to P3Dv4 Link to comment Share on other sites More sharing options...
Dougal 2 Posted February 2, 2018 Share Posted February 2, 2018 Thanks Bob - appreciated Link to comment Share on other sites More sharing options...
Dougal 2 Posted February 7, 2018 Share Posted February 7, 2018 On 31/01/2018 at 3:48 PM, masterhawk said: Yes, it is compatible to P3Dv4 Will I be able to install it using the LM recommended method, or must it be installed to the P3Dv4 root folder? Thanks Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted February 7, 2018 Deputy Sheriffs Share Posted February 7, 2018 55 minutes ago, Dougal said: Will I be able to install it using the LM recommended method, or must it be installed to the P3Dv4 root folder? Thanks The installer will use the root folder. you can redirect it to wherever you want, but you then maybe have to manually adjust some things. Link to comment Share on other sites More sharing options...
Dougal 2 Posted February 19, 2018 Share Posted February 19, 2018 Hi Guys This is a long and complicated thread. I've tried to plough through it, looking for the info I need, but so far, have not found a solution to my problem... After purchasing and installing Madeira X Evolution, although LPMA itself seems fine (and I love it!), LPPS is most definitely not:-( LPPS has a huge MESH issue, whereupon the entire airport and surrounding area are raised by what appears to be several hundred feet at least at least. I have FTX Global installed, but NOT Vectors. Any specific LPPS help or advice much appreciated Thanks Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted February 19, 2018 Deputy Sheriffs Share Posted February 19, 2018 1 hour ago, Dougal said: Hi Guys This is a long and complicated thread. I've tried to plough through it, looking for the info I need, but so far, have not found a solution to my problem... After purchasing and installing Madeira X Evolution, although LPMA itself seems fine (and I love it!), LPPS is most definitely not:-( LPPS has a huge MESH issue, whereupon the entire airport and surrounding area are raised by what appears to be several hundred feet at least at least. I have FTX Global installed, but NOT Vectors. Any specific LPPS help or advice much appreciated Thanks Hi, what is the version of the installer? Which sim are you using? Any old LPPS addon left on your system? Scenery order correct? Have you checked/ did you follow number 1, 2, 3 and 5 of this post? http://forum.aerosoft.com/index.php?/topic/120871-madeira-mesh-mega-topic/&do=findComment&comment=804438 Link to comment Share on other sites More sharing options...
Dougal 2 Posted February 19, 2018 Share Posted February 19, 2018 58 minutes ago, masterhawk said: Hi, what is the version of the installer? Which sim are you using? Any old LPPS addon left on your system? Scenery order correct? Have you checked/ did you follow number 1, 2, 3 and 5 of this post? http://forum.aerosoft.com/index.php?/topic/120871-madeira-mesh-mega-topic/&do=findComment&comment=804438 Hi Bob and thanks for reply. Version is: AS_MADEIRA-X-EVOLUTION_FSX-P3D-FSXSTEAM_V105a Sim is P3Dv4.2 I did previously have the earlier Aerosoft version installed, but NOT within the P3D root folder (XML method) so have been able to fully remove all remnants of this. Scenery order checked and correct. Items 1,2,3 & 5 all followed (and double checked) Removed my 'Toposim' Mesh too, but didn't change anything:-( Got to be clashing with something i suppose, but I just can't find what. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted February 19, 2018 Deputy Sheriffs Share Posted February 19, 2018 58 minutes ago, Dougal said: Hi Bob and thanks for reply. Version is: AS_MADEIRA-X-EVOLUTION_FSX-P3D-FSXSTEAM_V105a Sim is P3Dv4.2 I did previously have the earlier Aerosoft version installed, but NOT within the P3D root folder (XML method) so have been able to fully remove all remnants of this. Scenery order checked and correct. Items 1,2,3 & 5 all followed (and double checked) Removed my 'Toposim' Mesh too, but didn't change anything:-( Got to be clashing with something i suppose, but I just can't find what. Is there any old file in scenery\world\scenery from LPPS? There should be a new one. You can try this, besides a few fixes it includes highres mesh for LPPS. Maybe its helping. http://forum.aerosoft.com/index.php?/topic/127517-madeira-x-evo-105a-fixes-all-in-one-unofficial/ Link to comment Share on other sites More sharing options...
Dougal 2 Posted February 19, 2018 Share Posted February 19, 2018 3 minutes ago, masterhawk said: Is there any old file in scenery\world\scenery from LPPS? There should be a new one. You can try this, besides a few fixes it includes highres mesh for LPPS. Maybe its helping. http://forum.aerosoft.com/index.php?/topic/127517-madeira-x-evo-105a-fixes-all-in-one-unofficial/ The only one is: AFX_LPPS_ALT.bgl which I 'believe' is the correct file? will check out what you've posted ta! Link to comment Share on other sites More sharing options...
Dougal 2 Posted February 21, 2018 Share Posted February 21, 2018 On 19/02/2018 at 6:32 PM, masterhawk said: Is there any old file in scenery\world\scenery from LPPS? There should be a new one. You can try this, besides a few fixes it includes highres mesh for LPPS. Maybe its helping. http://forum.aerosoft.com/index.php?/topic/127517-madeira-x-evo-105a-fixes-all-in-one-unofficial/ I've now tried all the above, but still can't use LPPS due mesh issues:-( If anyone has any more ideas how I might fix this, or what might be wrong on my system, I'd be very grateful Thanks Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted February 21, 2018 Author Aerosoft Share Posted February 21, 2018 Mmmm, in these case really the only way is to go back to a basic system and start adding things one by one until it goes bad. then you know where the conflict is. We can only hope that there will be a more logical system in the future. Link to comment Share on other sites More sharing options...
Dougal 2 Posted February 21, 2018 Share Posted February 21, 2018 2 hours ago, Mathijs Kok said: Mmmm, in these case really the only way is to go back to a basic system and start adding things one by one until it goes bad. then you know where the conflict is. We can only hope that there will be a more logical system in the future. OUCH! ;-) Link to comment Share on other sites More sharing options...
Dougal 2 Posted February 22, 2018 Share Posted February 22, 2018 OK finally got it flyable at least:-) Not too sure this is exactly how it should look, but it'll work. Please login to display this image. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted February 22, 2018 Deputy Sheriffs Share Posted February 22, 2018 1 hour ago, Dougal said: OK finally got it flyable at least:-) Not too sure this is exactly how it should look, but it'll work. Please login to display this image. Hi, is this with my high res mesh? If yes, it’s correct. I was not able to edit the source file to fit perfectly. IRL there is a rwy slope of 30m high difference. Link to comment Share on other sites More sharing options...
Dougal 2 Posted February 26, 2018 Share Posted February 26, 2018 On 22/02/2018 at 2:22 PM, masterhawk said: Hi, is this with my high res mesh? If yes, it’s correct. I was not able to edit the source file to fit perfectly. IRL there is a rwy slope of 30m high difference. Yes it is. Thank you for doing that too - much appreciated! Link to comment Share on other sites More sharing options...
bougnat88 4 Posted March 27, 2018 Share Posted March 27, 2018 I bought the update for P3D v.4 and that works perfectly, much better than under FSX. I have no more the problem of the lights. Only small problem, probably of my fault: I do not see any more wind turbines. Thanks for your help. François Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.