Laut dem Handbuch des Garmin 530 ....   https://static.garmin.com/pumac/GNS530_PilotsGuide.pdf   ..... steht im Abschnitt 8.9 NEAREST AIRSPACE PAGE dieses hier beschrieben   Was übersetzt bedeutet: " Wenn das Flugzeug in einen Luftraum eingeflogen ist, erscheint die Meldung ‚Inside Airspace‘. "    

I flew the CRJ900 V2 into LFMN Nice on the ILS-Y RW04L.NERA2 which is a long DME ARC.  The aircraft followed the ARC (reasonably after a shaky start) but with about 1/4 of the ARC remaining before capturing the LOC, the aircraft veered to the right (seemingly) direct to the airport. To be honest, I shut down instead of correcting this because the entire arrival seemed flaky and I’d had enough by then. The descent was done using coupled VNAV for the BORD7R but it was very wrong because the aircraft did not descend in time for the transition at BORDI FL170B and it actually only started its descent at BORDI. I let it play out to see what it would do when the EXPECTED TOD based on my calculations was missed. The route and arrival was correctly drawn on the ND and waypoints correct on the CDU, and VNAV advisory showed the incorrect TOD countdown in nm. TOD was NOT shown on the magenta route.  I’m not expecting support for this as I’m perfectly capable of flying all of the above, so I’m just advising you in case it helps build a picture of issues for future updates. 

Can you see that behavior (sticking or non recognized gear buttons) in the Windows joystick utility ?  

Hello. I bought the CRJ-700,550,900, and 1000 for MSFS 2020 a couple years back through the in sim marketplace. I heard that version 2 was released for the marketplace so I went to download it tonight along with the hues liveries for some US based carriers. I loaded into the CRJ-900 in the PSA livery and some parts of the new version 2 were broken or completely absent. The cabin from version 1 is still there but the version 2 cabin overlaps it making it really weird. I can also open the door for the flight deck but the cabin is inaccessible still like version 1. The EFB is completely unchanged and the update did not take place there and there is what appears to be ice on the windshield even with anti ice turned on. Some aspects do work though, such as the new flight model and improved cockpit textures. It seems to me that some parts of the version 1 CRJ are still present but only limited parts of version 2 are actually working. I tried to uninstall and then reinstall the aircraft through the content manager but after that I had the same exact issues. This is all in MSFS 2020 and I haven't tried 2024 yet but I haven't made the switch to the new sim yet so my priority is to have it work in 2020. I am also using the boris audio pack but I don't think that would have any affect on anything.    Thanks! 

Has anyone experienced the gear sticking when changing gears it either dosent recognize the button or sticks which makes it impossible to use the buttons work fine so does the wheel but having serious issues with the gearbox part

Bei mir sind alle .for-Flächen über die 800er-Library.txt grundsätzlich im "Herbst"-Look, trotz neu erzeugter 1.4er-Ortho-Kacheln. Das lässt sich mit unterschiedlich eingestellten Tagesdaten unmittelbar bei Aufruf von XP12 und direkten Blick auf eine 7-forests-Fläche reproduzieren. Trotzdem, das habe ich heute auf die Schnelle gesehen, könnte es mit 1.4er-Orthos und den 7-Forests-Layern Merkwürdigkeiten geben, zumindest scheinen diese Flächen im Standard-XP12 anders auszusehen.   Beispiel AS-EDDF mit Ortho-1.4-Kachel und 7-expforests, XPlane-Datum 01.05, 15:00 Uhr: Ich habe die AS-Scenery von allen .for-Flächen, inkl. Exclusions, befreit. Dafür kommen die Flächen aus meinem X-World_Europe-7-expforests zum Einsatz. Alle Teilflächen der Frankfurter Stadtwälder sind über OSM als "simheaven/forests/mixed.for" in der 7-expforests gelandet. Rot markiert der eindeutig herbstlich erscheinende "Unterwald", während die anderen sichtbaren Teilflächen, ebenfalls "simheaven/forests/mixed.for", der Jahreszeit angemessen in "full green" erscheinen.

Ja... das sieht ja mal wirklich wild aus...

Das kann passieren wenn das verwendete Mesh keine Maps für die Jahreszeiten hat.

Problem gelöst - ich habe vergessen die 2. Datei beim patchen hinzuzufügen

Hallo Liebes Forum, ich bekomme bei meiner Cessna beim Alarm folgende Meldung : "Inside Airspace" Was bedeutet das denn. Liebe Grüße und Danke!