Barthanol 1 Posted March 25, 2022 Share Posted March 25, 2022 feel free to delete found answer after posting. Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted March 26, 2022 Aerosoft Share Posted March 26, 2022 12 hours ago, Barthanol said: feel free to delete found answer after posting. Hi, What do you mean precisely ? Thank you. Link to comment Share on other sites More sharing options...
Barthanol 1 Posted March 26, 2022 Share Posted March 26, 2022 Hello, Apologies for the confusion. I meant as newly registered I am unable to delete that post or send pm's etc., so soon after I posted my original question, I found the answer here on another page. I could not delete my post only edit it to state " feel free to delete, found answer after posting". You could delete both posts now to keep things tidy, thanks. Thanks so much to everyone for the wealth of information provided in this forum topic, it has been very helpful & much appreciated. 1 Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted March 26, 2022 Aerosoft Share Posted March 26, 2022 2 hours ago, Barthanol said: Hello, Apologies for the confusion. I meant as newly registered I am unable to delete that post or send pm's etc., so soon after I posted my original question, I found the answer here on another page. I could not delete my post only edit it to state " feel free to delete, found answer after posting". You could delete both posts now to keep things tidy, thanks. Thanks so much to everyone for the wealth of information provided in this forum topic, it has been very helpful & much appreciated. No problem at all. Glad you found the answer to your question. Happy flyings. Link to comment Share on other sites More sharing options...
paladin569 3 Posted April 18, 2022 Share Posted April 18, 2022 OK I have been away from this for a while and now I need to make a trim knob work. I have the encoder setup and it works from the sim mapping but I wan to incorporate it into the A&O template. Problem Iam having is that the LVAR does not seem to work when I script it. I am using the ELEVTRIM Lvar but it just makes the elevator shake and not move. Any assistance on making the stab trim actually function? This is what I have at this moment which does not work. -1·(>L:ASCRJ_ELEVTRIM,·number)-1·(>L:ASCRJ_ELEVTRIM,·Number) Link to comment Share on other sites More sharing options...
LesOReilly 314 Posted April 19, 2022 Share Posted April 19, 2022 10 hours ago, paladin569 said: OK I have been away from this for a while and now I need to make a trim knob work. I have the encoder setup and it works from the sim mapping but I wan to incorporate it into the A&O template. Problem Iam having is that the LVAR does not seem to work when I script it. I am using the ELEVTRIM Lvar but it just makes the elevator shake and not move. Any assistance on making the stab trim actually function? This is what I have at this moment which does not work. -1·(>L:ASCRJ_ELEVTRIM,·number)-1·(>L:ASCRJ_ELEVTRIM,·Number) I am pretty sure that the normal K:Events for Trim actually work with the CRJ and the LVAR is just for the position of the switch... Link to comment Share on other sites More sharing options...
paladin569 3 Posted April 19, 2022 Share Posted April 19, 2022 Yeah you are right. I am over thinking it Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted April 19, 2022 Aerosoft Share Posted April 19, 2022 8 hours ago, paladin569 said: Yeah you are right. I am over thinking it Hi Paladin, You can also use the standard MSFS assignments : Best regards. Link to comment Share on other sites More sharing options...
LesOReilly 314 Posted April 19, 2022 Share Posted April 19, 2022 12 hours ago, SimWare said: Hi Paladin, You can also use the standard MSFS assignments : Please login to display this image. Best regards. Those are K Events... Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted April 20, 2022 Aerosoft Share Posted April 20, 2022 6 hours ago, LesOReilly said: Those are K Events... Indeed, what I mean is that you can either address them from within AAO or directly from the sim. 1 Link to comment Share on other sites More sharing options...
Caleb Oxford 5 Posted July 21, 2022 Share Posted July 21, 2022 I've built a new PC and now my lorby isn't working with the CRJ... I have the profiles downloaded and the application is reading all of my inputs on the alpha and bravo, but it is not sending information to the sim... I feel like im missing something, any suggestions? Link to comment Share on other sites More sharing options...
Caleb Oxford 5 Posted July 21, 2022 Share Posted July 21, 2022 So, i've noticed that 'CRJ" is now missing from simulator events... Could this by why LAAO isn't sending data to the sim? Please login to display this image. Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted July 21, 2022 Aerosoft Share Posted July 21, 2022 Can you post a screenshot of the main screen ? The one that appears after launching AAO when the plane is fully loaded in MSFS ? Thank you. Link to comment Share on other sites More sharing options...
LesOReilly 314 Posted July 29, 2022 Share Posted July 29, 2022 On 7/21/2022 at 3:57 PM, Caleb Oxford said: So, i've noticed that 'CRJ" is now missing from simulator events... Could this by why LAAO isn't sending data to the sim? Please login to display this image. There is probably a Module / LVAR Bridge of some sort that you also need to install ... your issue by the way is with AAO not the CRJ... really you should be contact Lorby 1 1 Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted July 29, 2022 Aerosoft Share Posted July 29, 2022 1 hour ago, LesOReilly said: There is probably a Module / LVAR Bridge of some sort that you also need to install ... your issue by the way is with AAO not the CRJ... really you should be contact Lorby Agree with Les. Also, the first basic step is to check if AAO connects with the plane at the first place. This can be seen on the top of the main AAO screen at startup, when the aircraft is fully loaded in the simulator. Best regards. 2 Link to comment Share on other sites More sharing options...
Deputy Sheriffs Herman 1591 Posted July 30, 2022 Deputy Sheriffs Share Posted July 30, 2022 I noticed at the last update for AAO that my CRJ self-made scripts were missing from the active section. They were still in the appropriate section of the scripts editor, just not active any more. Some I simply needed to re-activate, others had to be re-created. Since then, everything comes up as expected. So perhaps the recent AAO update might be at the root of this. And as with SimWare, I believe Les is right about where to go for further troubleshooting, reporting what you learn about SimWare's comment about AAO even connecting. 2 Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted July 30, 2022 Aerosoft Share Posted July 30, 2022 1 hour ago, Herman said: I noticed at the last update for AAO that my CRJ self-made scripts were missing from the active section. Thanks Herman. I must admit, I never updated AAO although it was offered at startup. Philosophy was : "If it ain't broken, don't fix it." However for support purposes, and at the light of what you say above, I will make the update. Not making update is a legitimate end user philosophy, not a support agent one. I learned something ! Never too late... 2 Link to comment Share on other sites More sharing options...
Deputy Sheriffs Herman 1591 Posted July 31, 2022 Deputy Sheriffs Share Posted July 31, 2022 In general, my approach is the same as yours, as in, "If it ain't broken..." I was hoping the update would offer a solution to three position switches (as in the Milviz Cessna 310), so took a chance. Anyway, AAO is once again fully functional, and reprogramming it was a useful reminder exercise. 1 Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted July 31, 2022 Aerosoft Share Posted July 31, 2022 2 hours ago, Herman said: update would offer a solution to three position switches (as in the Milviz Cessna 310) Hi Herman, I don't specifically know the Cessna switch question, but having a look to the tool used in this post can maybe offer some ideas ? 2 Link to comment Share on other sites More sharing options...
Deputy Sheriffs Herman 1591 Posted July 31, 2022 Deputy Sheriffs Share Posted July 31, 2022 Excellent! Likely just what I needed. This is my project for a sunny Sunday afternoon here in the Pacific Northwest. Thanks so much. 1 Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted July 31, 2022 Aerosoft Share Posted July 31, 2022 2 hours ago, Herman said: Excellent! Likely just what I needed. This is my project for a sunny Sunday afternoon here in the Pacific Northwest. Thanks so much. You are welcome. Enjoy the sunny Sunday... Link to comment Share on other sites More sharing options...
Ha_Ma 195 Posted August 1, 2022 Share Posted August 1, 2022 I go and bind the one function of such buttons with "Press" and "Release" i.e. via AxisAndOhs. Much easier and no other tools needed. For three-pos-switches i use the "long press" function of AAO: One position (middle to up) is toggled via short press and the other (middle to down) via long press. This works very well. 1 1 Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted August 1, 2022 Aerosoft Share Posted August 1, 2022 The 3 position switch solution is really cool indeed ! Link to comment Share on other sites More sharing options...
SIMIOVOLADOR 1 Posted January 1, 2023 Share Posted January 1, 2023 Hello there. It's my first time here. Excellent post. The written has served a lot. But someone will have some Axis and Oh's template for the Saitek radio panel (I have 2 and I am still looking for how to make them work very well with the CRJ). Thanks so much. 1 Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted January 3, 2023 Aerosoft Share Posted January 3, 2023 Hi, I think SpadNext is more suitable for the Saitek modules. Please check this and other posts from the same poster : Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now