zrhphoto 0 Posted March 21, 2020 Share Posted March 21, 2020 Hello guys I bought the Zurich Scenery for P3D V4 and I have GSX Level 2. I now have two problems First When I load a flight the aircraft doesnt span on the centerline of the parking position does somebody know how to fix it? And second How to I get those Jetways working with this Sode Thing i dont get it very well Thanks for the help Link to comment Share on other sites More sharing options...
M4rk0 16 Posted March 21, 2020 Share Posted March 21, 2020 18 minutes ago, zrhphoto said: Hello guys I bought the Zurich Scenery for P3D V4 and I have GSX Level 2. I now have two problems First When I load a flight the aircraft doesnt span on the centerline of the parking position does somebody know how to fix it? And second How to I get those Jetways working with this Sode Thing i dont get it very well Thanks for the help Hi, Your first problem might be a AFCAD issue. You could try and reinstall the scenery and see if it fixes the problem Also for your second issue If you want SODE Jetways you can download a awesome profile from https://www.inibuilds.com/gsx-switzerland Regards, Markus Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted March 21, 2020 Deputy Sheriffs Share Posted March 21, 2020 You can also try Cartanya Files: https://www.facebook.com/groups/534069540668364 https://www.dropbox.com/sh/cxcx25441u0wai2/AAAA-iLnjlLHPgUIxhQq81Epa?dl=0&fbclid=IwAR3rz-Ucy-5Oa3tfDGtlCYNnoHKV2E3BUNKGdHuWMRLUREidplQvmXBOzew Link to comment Share on other sites More sharing options...
Beat578 32 Posted March 23, 2020 Share Posted March 23, 2020 And just a few hours ago, there was a new update including the circle and the heliport grill!!! It looks amazing. Hopefully the afcat still work, but I think they should as the parkings did not change, only some taxyways. Link to comment Share on other sites More sharing options...
data63 421 Posted March 23, 2020 Share Posted March 23, 2020 if taxiway an apron layouts changed the old AFCAD can't work as it contains taxiway infos Link to comment Share on other sites More sharing options...
Thomas Ammann 14 Posted March 24, 2020 Share Posted March 24, 2020 If anyone intressted by an modyfied AFCAD File with GSX Level 2 Jetways, send me a PM Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted March 24, 2020 Deputy Sheriffs Share Posted March 24, 2020 5 hours ago, Thomas Ammann said: If anyone intressted by an modyfied AFCAD File with GSX Level 2 Jetways, send me a PM You can upload a modified AFCAD to this forum, if you want. Link to comment Share on other sites More sharing options...
CJ Reed 4 Posted March 24, 2020 Share Posted March 24, 2020 Another issue at Aerosoft LSZH. In the Aerosoft A319IAE on Stand E20 in P3Dv4.5. Set 106 pax and 0.5tonnes of cargo... no cargo trucks. Could the culprit be: 1. Aerosoft LSZH 2. Aerosoft A319 Professional, or (heaven help us) 3 GSX v2 [skipper has decided to wait another 15 mins and if no bags by then will have to transfer pax to the XP11/Zibo Mod service to STN] Link to comment Share on other sites More sharing options...
CJ Reed 4 Posted March 24, 2020 Share Posted March 24, 2020 PMSL - Managed to get bags from waaaaay over on the opposite side of the airfield (crossing an active runway!), but only by resettimg GSX Yet the plane seems convinced the hold doors MUST be closed when loading bags and keep closing them whenever I try to open them - immersion 0%. Who knew Yuri Geller was a baggage handler at Zurich. Oh and just about to push when a second Fuel truck arrives to load zero fuel. LOL Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted March 24, 2020 Deputy Sheriffs Share Posted March 24, 2020 2 minutes ago, CJ Reed said: Managed to get bags from waaaaay over on the opposite side of the airfield (crossing an active runway!) I’m not sure if this is an AFCAD or GSX issue. Link to comment Share on other sites More sharing options...
CJ Reed 4 Posted March 24, 2020 Share Posted March 24, 2020 1 minute ago, masterhawk said: I’m not sure if this is an AFCAD or GSX issue. Hi there - I'm using the default unedited Zurich Afcad If it was Xplane, the scenery designer would ensure suitable Dynamic Vehicle parking locations were included (in their World Editor tool) I guess it's the same in P3D because I presumably GSX doesn't specify where the ground vehicles come from for every airport in the sim). Link to comment Share on other sites More sharing options...
CJ Reed 4 Posted March 24, 2020 Share Posted March 24, 2020 And the Fuel truck won't leave. Seems to me to be integration issues between the Aerosoft Airbus Ground Services features and GSX Oh well. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted March 24, 2020 Deputy Sheriffs Share Posted March 24, 2020 Ok, so lets stop here, as this is not a scenery issue. Link to comment Share on other sites More sharing options...
Emi 5161 Posted March 24, 2020 Share Posted March 24, 2020 41 minutes ago, CJ Reed said: I guess it's the same in P3D because I presumably GSX doesn't specify where the ground vehicles come from for every airport in the sim). Unfortunately it isn't, in P3D there is no such definition. Only GSX has an internal variable which could cover you up here. The links posted above contian files which have such definition. But as Otto pointed out, it's not a scenery issue, but purely a GSX issue. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted March 25, 2020 Aerosoft Share Posted March 25, 2020 Because we believe this topic has been answered we have closed it. If you have any more questions feel free to open a new topic. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.