Miguel_V 14 Posted November 29, 2019 Share Posted November 29, 2019 25 minutes ago, hbzug said: I'm not quite sure about the precise subject here, but I guess my problem fits in. Using P3DV4.5 on Windows 10. I can load Navigraph charts to the flight bag screeen at the departure airport, but trying to load arrival airport charts during the flight the sim first freezed and then crashed on both of my first flights with the new CRJ-900. I'm also using the Navigraph app on an iPad, so I can do without charts in the airplane. But it would be nice if it worked ... This I still have not experienced him, because I am trying that he can load the letters LIDO, impossible thing (I have opened a thread letters CRJ and NAVIGRAPH) in the I expose the problems, reason why I still have not made any flight with CRJ1000.... the manual of step by step they have communicated to me that they will solve it foreseen in next updates, it speaks of EFB but with the previous version of the CRJ 700/900 X Link to comment Share on other sites More sharing options...
wildeboer 3 Posted December 2, 2019 Author Share Posted December 2, 2019 ok i try`d it ll so far. the refences in the forum the error code via google uninstalling the crj and reinstall in different folder. the crash stays. till now i`m not shure if the connection with navi works because of the crash Link to comment Share on other sites More sharing options...
wildeboer 3 Posted December 2, 2019 Author Share Posted December 2, 2019 so far I try`d everythiing. follow the forum answers google the error and follow the answers uninstall the crj and reinstall different map I`m not shure if the navi connection works because of the crash. A friend had the same crash after changing charts and she deleted the crj and add it in a different folder and the crash was over. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted December 2, 2019 Deputy Sheriffs Share Posted December 2, 2019 And you hsve P3D4.5 HF2 installed? In which folder is your CRJ installed? Link to comment Share on other sites More sharing options...
wildeboer 3 Posted December 2, 2019 Author Share Posted December 2, 2019 my friend had it on c/progamfiles installed. I in c/documents now on D outside p3d4 thatis also on D/L.M./p3d4 Link to comment Share on other sites More sharing options...
wildeboer 3 Posted December 2, 2019 Author Share Posted December 2, 2019 Just 1 thing after de reinstall the FO pfdcand mfd are black Link to comment Share on other sites More sharing options...
Hoffie3000 96 Posted December 2, 2019 Share Posted December 2, 2019 If you want you change this via the EFB. Black= off is the default Mode to save FPS. Link to comment Share on other sites More sharing options...
wildeboer 3 Posted December 2, 2019 Author Share Posted December 2, 2019 thx just had a chat whit friend. since she uninstall the crj from c/progam files and install somewhere els in C no more ctd after changing charts Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted December 2, 2019 Aerosoft Share Posted December 2, 2019 Well, program files is a windows protected folder and files that are manipulated should never be installed there. Link to comment Share on other sites More sharing options...
wildeboer 3 Posted December 2, 2019 Author Share Posted December 2, 2019 I know but myne was in C/documents folder.And because the former crj7/9 , p3d4 and aivla efb files this was not a protected folder. waiting for the update regards wil Link to comment Share on other sites More sharing options...
wil de boer 1 Posted December 7, 2019 Share Posted December 7, 2019 its very frustating ( for me) but install the update but stil ctd . uninstall remove all crj maps that where left . removed p3d4 config and shaders . restart instal crj and patch but still ctd. firewall off. it is not that I`m without charts I have them running on a tablet but morethe frustation that I Link to comment Share on other sites More sharing options...
wildeboer 3 Posted December 9, 2019 Author Share Posted December 9, 2019 ok I followed a sugestions and patches made here and via navigraph support. And what I have found about this error in google search. until now no luck as soon as I pass the 2 conformation screens p3d4 ( the latest) shuts down. All the maps are shared and its the only progamm one that causes this trouble. I have/use hifi AS , projectfly , LRM , and several simelite solutions progams and little navmap. non of these progamms are on when starting the crj the only prog thats on is navigraphs simlink And its not that I`m blaming aerosoft or navigraph no I`m very happy with the support. Friends with flightsim have no trouble at all , I realy think its an institution on my pc. so I keep using the crj Ipad to setup for the flights and use charts on my tablet . regards wil Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3695 Posted December 10, 2019 Developer Share Posted December 10, 2019 Which two confirmation screens do you mean? And what is LRM please? Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted December 10, 2019 Deputy Sheriffs Share Posted December 10, 2019 @wildeboerPlease tell me which of your 2 account you want to use for the future: "wildeboer" or wil de boer"? Double accounts are not allowed. I will then close one of them. Link to comment Share on other sites More sharing options...
wildeboer 3 Posted December 15, 2019 Author Share Posted December 15, 2019 On 12/10/2019 at 11:16 AM, mopperle said: @wildeboerPlease tell me which of your 2 account you want to use for the future: "wildeboer" or wil de boer"? Double accounts are not allowed. I will then close one of them. wildeboer regards wil de boer Vatsim new online client Swift uses the same webadres 127.0.0.1 with different port and causes noproblems at all. I have uninstalled swift but it did`nt solve the problem . Still ctd after confirming the connection. It is beyond my knowledge why swift uses the same webadress with different port number has no problem to connect . regards wil de boer Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted December 15, 2019 Share Posted December 15, 2019 4 hours ago, wildeboer said: 127.0.0.1 That is merely a loop back address. Link to comment Share on other sites More sharing options...
mikemcw 0 Posted December 29, 2019 Share Posted December 29, 2019 I was curious if this issue was ever resolved. After installing the most recent CRJ update, I tried to start charts but get a message that says : (Navigraph Charts Error (init). Address: http://127.0.0.1:78980 is already in use). The sim does not crash or anything like that, I just can load charts. I do have Navigraph charts loaded on my computer and verified that it does work properly. In addition, charts on my ipad works as well. Is there a conflict between the charts app and the CRJ implementation? Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3695 Posted December 31, 2019 Developer Share Posted December 31, 2019 No, charts app and CRJ work side by side without any problem. Do you have some program where you could check what else uses port 7890? Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted December 31, 2019 Share Posted December 31, 2019 47 minutes ago, Hans Hartmann said: No, charts app and CRJ work side by side without any problem. Do you have some program where you could check what else uses port 7890? He could try the freeware TCP View, free, really easy to use. Link to comment Share on other sites More sharing options...
sho69607 3 Posted January 12, 2020 Share Posted January 12, 2020 I am still having this issue with the Navigraph CTD. The sim doesn't crash when I first load the charts, but when I go back later and look at the charts for the arrival airport I always get a CTD. There is also some stuttering with the charts section as well. Regarding the protected folder issue that was listed above, I have since followed that advice and reinstalled p3d and the CRJ in the base "C" Folder. Link to comment Share on other sites More sharing options...
wildeboer 3 Posted September 7, 2020 Author Share Posted September 7, 2020 its a long time ago and already give up a solution. But!!! After a whole new install p3d4 and all addons I upgrade my airbus license to p3d4 prof . Installing the airbus and learning how its working ( after a decade Boeings) I discovers that the ipad in the airbus works with navigraph. So curios if that means if the crj also works now with the navigraph and YES !! Only one thing remains the light ,only with the charts, is so bright or the txt is so vague that i have to set the ipad in night modes to read it. and that both the CRJ and Airbus . I don`t know why it refuses to work before the reinstall the W10 settings are not changed. regards wil Link to comment Share on other sites More sharing options...
wildeboer 3 Posted September 9, 2020 Author Share Posted September 9, 2020 an update. it seems that navigraph charts only visible in aerosoft proffesional texture.. I`ve 1 a320 united and in there is navigraph not working Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.