FlightSimSoft.com 283 Posted July 31, 2017 Share Posted July 31, 2017 Hello, as requested we update the Flight Plan Template Guide 2.0. This new guide replaces and contains previous guide. Best regards, Flight Plan Template Guide 2.0.pdf Link to comment Share on other sites More sharing options...
bcars 23 Posted August 1, 2017 Share Posted August 1, 2017 Christian: Thank you so much the updated Template guide. The new format is an alphabetical listing of all the fields. Nice. One addition that is needed is to indicate which fields must be encapsulated within Sections. For example, there is are several fields that can only be displayed if they are surrounded by the XXXXX_Begin/End construct. This new format does not show those dependencies. Link to comment Share on other sites More sharing options...
Amit240 0 Posted August 12, 2017 Share Posted August 12, 2017 Can you explain how to you the GPS RAIM functions? Link to comment Share on other sites More sharing options...
blackbeast 2 Posted September 13, 2017 Share Posted September 13, 2017 hi in future can you add the possibility to have this info on OFP : ----------------- FULL THRUST ------------------- +15C 80000 FIELD 131-139 139 145 2201M 90.7 ---------------- REDUCED THRUST ----------------- +61C 68829 FIELD 148 148 151 722M 84.2 +62C 67940 FIELD 148 148 151 569M 84.1 +63C 67116 FIELD 148 148 150 414M 84.0 +64C 66292 FIELD 148 148 150 251M 83.8 //+65C 65469 FIELD 149 149 150 78M 83.7 and for landing : ---------------- MAXIMUM BRAKING ---------------- //MAX MANUAL 80000 KG 860M (MARGIN 1768M) -------------- AUTOBRAKE LDG DIST --------------- MED 80000 KG 1202M (MARGIN 1426M) LOW 80000 KG 1798M (MARGIN 830M) thank you Link to comment Share on other sites More sharing options...
marc320 6 Posted September 15, 2017 Share Posted September 15, 2017 Hello Guys Is it possible to do an addition or subtraction to get a delta? Regards! Marc Ex: LDW - Structural LDW = i want to know TOW - Structural TOW = I want to know Link to comment Share on other sites More sharing options...
FlightSimSoft.com 283 Posted September 16, 2017 Author Share Posted September 16, 2017 On 12.08.2017 at 19:12, Amit240 sagte: Can you explain how to you the GPS RAIM functions? This function was only for testing purposes and will not be included in next release any more. Link to comment Share on other sites More sharing options...
trollifail 0 Posted December 8, 2017 Share Posted December 8, 2017 Hi, is there the possibility to add a feature to show the route with only FL steps? EG: LOGDI Y663 EKDIR/F370 DCT LOMED instead of LOGDI Y663 EKDIR/N0427F370 DCT LOMED Thanks Link to comment Share on other sites More sharing options...
srcooke 422 Posted December 8, 2017 Share Posted December 8, 2017 Where do you intend to display this IFPS will not accept the level change without speed also in the ATC route Link to comment Share on other sites More sharing options...
trollifail 0 Posted December 9, 2017 Share Posted December 9, 2017 In the OFP route section, because in most real OFPs route is displayed in this way Link to comment Share on other sites More sharing options...
Gaviao 0 Posted March 3, 2018 Share Posted March 3, 2018 Hi I've been doing some OFP templates for PFPX, but when I tried to do the Easyjet version, I noticed that Pfpx only gives you the number in FromUTCDiff and not the sign (+/-) so one hour above UTC is the same as one hour below UTC in th Flightplan. The number format they use is number 4 (+1.00 or -1.00). Also, if it's the same as UTC, it should show 0.00, instead it shows: .00 Is there anyway to get the positive and negative sign with the number? Link to comment Share on other sites More sharing options...
phil747fan 52 Posted December 7, 2018 Share Posted December 7, 2018 hello, no you should have that: it is a new version so please check on the last software installed and use that new exe. Please login to display this image. Link to comment Share on other sites More sharing options...
f.skywalker 17 Posted December 7, 2018 Share Posted December 7, 2018 How works the new installation. Deinstall the old Version or install the new Version with the setup over the old version. Link to comment Share on other sites More sharing options...
phil747fan 52 Posted December 7, 2018 Share Posted December 7, 2018 i was able to install both so i cant tell which way works for you. Link to comment Share on other sites More sharing options...
Luke160388 29 Posted December 7, 2018 Share Posted December 7, 2018 I installed on top of the previous version and have lost all my PFPX data! Link to comment Share on other sites More sharing options...
phil747fan 52 Posted December 7, 2018 Share Posted December 7, 2018 there is a thread about saving data before updating posted by Stephen .... Link to comment Share on other sites More sharing options...
Luke160388 29 Posted December 7, 2018 Share Posted December 7, 2018 can data be recovered? 2 minutes ago, phil747fan said: there is a thread about saving data before updating posted by Stephen .... Link to comment Share on other sites More sharing options...
Giuliano servio 0 Posted December 8, 2018 Share Posted December 8, 2018 i have a problem to release flightplan, when i try to release a FP nothing happens Link to comment Share on other sites More sharing options...
phil747fan 52 Posted December 8, 2018 Share Posted December 8, 2018 we should not discuss the issue here but on the main forum just below you will a lot of reports on it. Link to comment Share on other sites More sharing options...
Amit240 0 Posted December 11, 2018 Share Posted December 11, 2018 is there going to be an update for the flight plan template guide ? Link to comment Share on other sites More sharing options...
Owepilot 1 Posted December 20, 2018 Share Posted December 20, 2018 Hi, I do really appreciate the new version of PFPX andt the updated fields. What I feel will come in handy is a short description of the fields so to know what to choose for correct context. For instance the difference of PlannedEET, ScheduledEET and ScheduledTripTime would immensely enlighten the dark nights of the north. Link to comment Share on other sites More sharing options...
El Stevo 2 Posted January 10, 2019 Share Posted January 10, 2019 I'd like to second that request for an updated version of the FP template guide! Link to comment Share on other sites More sharing options...
Neepie 0 Posted November 21, 2020 Share Posted November 21, 2020 On 3/3/2018 at 8:34 PM, Gaviao said: Hi I've been doing some OFP templates for PFPX, but when I tried to do the Easyjet version, I noticed that Pfpx only gives you the number in FromUTCDiff and not the sign (+/-) so one hour above UTC is the same as one hour below UTC in th Flightplan. The number format they use is number 4 (+1.00 or -1.00). Also, if it's the same as UTC, it should show 0.00, instead it shows: .00 Is there anyway to get the positive and negative sign with the number? Yes! If you add 100 to the parameter field, you will get +/- . If you add 1000 to the parameter field, you will get P/M . For example <&FromUTCDiff[104]> will give you something that looks like this: +0100 Link to comment Share on other sites More sharing options...
mfhansen82 2 Posted August 4, 2021 Share Posted August 4, 2021 Sorry for reviving an old thread, but I am at a loss here. I am trying to find the keyword for the Pilot In Command, but I cannot find it. Also, I have tried to include fields with Crew 1 to 3 in a crew info file, but it doesn't seem to work. My template is as such: PIC: | <&Crew1> ________________|_____________________________________________________________ 2nd Officer: | <&Crew2> ________________|_____________________________________________________________ 3rd Officer: | <&Crew3> ________________|_____________________________________________________________ Update: Nevermind, for some reason it just worked...... Sincerely, Michael Hansen Link to comment Share on other sites More sharing options...
srcooke 422 Posted August 4, 2021 Share Posted August 4, 2021 Tested here Michael and having entered the entries and computed the flight values return as follows: <&PIC> =PILOT <&Crew1> =FO <&Crew2> =OTHER <&Crew3> =SO Link to comment Share on other sites More sharing options...
mfhansen82 2 Posted August 4, 2021 Share Posted August 4, 2021 1 hour ago, srcooke said: Tested here Michael and having entered the entries and computed the flight values return as follows: <&PIC> =PILOT <&Crew1> =FO <&Crew2> =OTHER <&Crew3> =SO Yes, I found that out by trial and error, but thanks for the quick reply. Do you happen to know if I can put the Message to Crew in Details into the plan somehow? Sincerely, Michael Hansen Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.