Gastonreif 0 Posted June 21, 2016 Share Posted June 21, 2016 Hi, Me and my friend bought and installed Prague 1.04 today and on FSX we have issues with dynamic jetways. Two different computers. Simple they show up but are static, not moving. APC is executed. We tried A319 Aerosoft and 767 Captain sim parked , cold n dark no running engines and brakes set. What we did wrong? For my 767 parked exactly on marking lane gate 3 docking system sayin unknown type. And one more thing. In the PDF manual i saw configuration tool where you can set or disable some features. Thats nice but i cannot find this configuration tool. Where is it located? Thanks for help. EDIT: After some research both of us, jetways now working on some aircrafts. Notes: captain sim 767-200 cargo - not working at all, docking system says unknown captian sim 767-300 passanger - not working at all, docking system says unknown FSLabs Concorde - working but jetway is connected in the middle of the airplane in the wing (wrong door), docking system says warning default Microsoft 737-800 - working well Gaston Link to comment Share on other sites More sharing options...
DarrianCZE 84 Posted June 21, 2016 Share Posted June 21, 2016 1 hour ago, gforce800 said: That works for me! But something that does not, is a huge FPS loss. When dynamic jetways are enabled i get around 15-20 FPS, when they are disabled i get around 35-40 FPS in the cockpit when flying the AS Airbus. Please do something with it, it is very annoying that i have to choose between good FPS or dynamic jetways . Regards. Yep. Same problem. I get around 40 FPS without jetways, and 22 - 27 FPS with active jetways in VC of PMDG 737NGX. But what I have actually noticed, that when my P3D window is not active, it jumps to around 30 - 35 FPS. Link to comment Share on other sites More sharing options...
Terblanche 118 Posted June 21, 2016 Share Posted June 21, 2016 Me too ... massive FPS hit and that with all other scenery disabled only departure and arrival airports active. Going back to 1.03 Link to comment Share on other sites More sharing options...
pgreenwo 117 Posted June 21, 2016 Share Posted June 21, 2016 52 minutes ago, Terblanche said: Me too ... massive FPS hit and that with all other scenery disabled only departure and arrival airports active. Going back to 1.03 I followed your guide on Airport controller fix. Uninstalled all airports - EDDT, LSZH & LKPR. I then installed Prague 1.04 and then the others - All working fine and no FPS hit with dynamic jetways at Prague at all. Hope you guys get sorted nothing worse than fiddling all your scenery around Link to comment Share on other sites More sharing options...
Stefan bradtke 10 Posted June 21, 2016 Share Posted June 21, 2016 Hello, with the new Version i have Default Buildings inside the LKPR Scenery !? Any idea why ? Best regards Please login to display this image. Link to comment Share on other sites More sharing options...
EndcoreXD 0 Posted June 21, 2016 Share Posted June 21, 2016 Hey guys my problem is that i that APC dont work at all. When i park at the gate the jetways moves to the door. But there are no other vehicle like a foos truck ? And my question ist how do APC work with pushback ? Gesendet von meinem SM-G920F mit Tapatalk Link to comment Share on other sites More sharing options...
Premek 276 Posted June 22, 2016 Author Share Posted June 22, 2016 @Gastonreif Run 'HarvesterLauncher.bat' from the 'Aerosoft/AirportController' folder. This needs to be done every time you install new aircraft or livery. Link to comment Share on other sites More sharing options...
Premek 276 Posted June 22, 2016 Author Share Posted June 22, 2016 4 hours ago, PilotAviation said: Hey guys my problem is that i that APC dont work at all. When i park at the gate the jetways moves to the door. But there are no other vehicle like a foos truck ? And my question ist how do APC work with pushback ? Gesendet von meinem SM-G920F mit Tapatalk @PilotAviation What a perfect oxymoron :-) If APC would not work at all, you could not see jetways moving ;-) 4 hours ago, PilotAviation said: Hey guys my problem is that i that APC dont work at all. When i park at the gate the jetways moves to the door. But there are no other vehicle like a foos truck ? And my question ist how do APC work with pushback ? Gesendet von meinem SM-G920F mit Tapatalk Pushback and Ground Handling vehicles will be available in later update. It was stated several times Link to comment Share on other sites More sharing options...
Premek 276 Posted June 22, 2016 Author Share Posted June 22, 2016 6 hours ago, Stefan bradtke said: with the new Version i have Default Buildings inside the LKPR Scenery !? @Stefan bradtke Pushback and Ground Handling vehicles will be available in later update. It was stated several times Link to comment Share on other sites More sharing options...
Premek 276 Posted June 22, 2016 Author Share Posted June 22, 2016 @Terblanche @DarrianCZE @flightdeck @gforce800 9 hours ago, gforce800 said: That works for me! But something that does not, is a huge FPS loss. When dynamic jetways are enabled i get around 15-20 FPS, when they are disabled i get around 35-40 FPS in the cockpit when flying the AS Airbus. As I wrote already yesterday this is due to the "consumption" of dynamic jetways. It could happen on under-average machines with complex or on average machines with add-ons like Aerosoft Airbus or PMDG stuff. I'll supply Configuration Tool soon - this will allows you to to switch to static jetways. 9 hours ago, gforce800 said: Please do something with it, it is very annoying that i have to choose between good FPS or dynamic jetways I'll give it a thought. The problem is jetways are ready to serve also AI and hence the resources consumption is really significant. I have to consider implementing 'Just user a/c jetway is dynamic' which should improve this situation. But this is not piece of cake, will take some time... Link to comment Share on other sites More sharing options...
f.skywalker 17 Posted June 22, 2016 Share Posted June 22, 2016 Hi Premek, I am irritated. Yesterday I have uninstalled the functioning version 1. 03 and then have installed the version 1. 04. For a moment everything was OK. Then I have to the test sometimes Split loaded to see whether still everything functioned. Then I have positioned myself again to Prague. Then, however, there were there no more gates and Autogen. After long searches I have seen by the installation no new airport controller was installed. The APC. exe has not changed. By my friend a second airport controller was installed in the list Aerosft obviously with the ending airport controller 1. 4. Now he had to Airport Controllers installed. I will not make a new installation from EDDT, LDSP, LSZH . The Framedrop only appears if the controller is begun several times. . . My friend has indicated with the APC 1. 4 version mostly double gates. (Gate 30) I use FSX !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Frank from EDDM Link to comment Share on other sites More sharing options...
Premek 276 Posted June 22, 2016 Author Share Posted June 22, 2016 @f.skywalker Frank I understand your upset, but you didn't give me any chance to help you. No files, just complains. Could you, please, calm down, send me the files and also give me the version numbers of files you've got in AirportController folder. Highly likely the installation was squeezed. The other and maybe even faster possibility is to use the Configuration File Fixer from first post. Link to comment Share on other sites More sharing options...
f.skywalker 17 Posted June 22, 2016 Share Posted June 22, 2016 Hi Premek, ok...at this time it is a problem because a get my image back with version 1.03. What i can say, after the installation from 1.04 the APC.exe Version was 1.0.16.60530 When you give me your mail adress i send you the apc folder from my 1.03 installation Frank Link to comment Share on other sites More sharing options...
Terblanche 118 Posted June 22, 2016 Share Posted June 22, 2016 @pgreenwo - thank you for the reminder that from now on this will be the procedure ... Uninstall LKPR Uninstall LSZH Uninstall LDSP Uninstall EDDT Delete the whole APC folder Install LKPR Install LSZH Install LDSP Install EDDT PRAY!! @Premek - surely, it cannot be such a rigmarole every time you install a scenery that uses APC ...? Link to comment Share on other sites More sharing options...
Premek 276 Posted June 22, 2016 Author Share Posted June 22, 2016 24 minutes ago, f.skywalker said: When you give me your mail adress i send you the apc folder from my 1.03 installation @f.skywalker I menat configuration files as mentioned in first post: - fsx.cfg - exe.xml - apc.cfg (from 'Aerosoft\AirportController' folder) But I'd suggest you to reinstall LKPR 1.04 first - it might fix the issue. If it does not, please send me above mentioned files please to support (at) xht-labs.com Link to comment Share on other sites More sharing options...
Premek 276 Posted June 22, 2016 Author Share Posted June 22, 2016 1 minute ago, Terblanche said: @Premek - surely, it cannot be such a rigmarole every time you install a scenery that uses APC ...? I was ensured by Aerosoft all installers was checked and if needed fixed to avoid clashes. Are you sure have all the latest installers please? Link to comment Share on other sites More sharing options...
Terblanche 118 Posted June 22, 2016 Share Posted June 22, 2016 @Premek - yes I have, all scenery are up to date. Everything was working 100% and then came LKPR 1.04 and "KAPPAAAOW!" right back to page 1 of this thread ... Link to comment Share on other sites More sharing options...
f.skywalker 17 Posted June 22, 2016 Share Posted June 22, 2016 Hi Premek, i send a file to your support Frank Link to comment Share on other sites More sharing options...
EndcoreXD 0 Posted June 22, 2016 Share Posted June 22, 2016 vor 4 Stunden , Premek sagte: @PilotAviation What a perfect oxymoron :-) If APC would not work at all, you could not see jetways moving ;-) Pushback and Ground Handling vehicles will be available in later update. It was stated several times Okay i understand I only have seen this video: And then i wanted the ground vehicle too. But okay i must wait only. First have only the Jetway but it is the same Link to comment Share on other sites More sharing options...
Premek 276 Posted June 22, 2016 Author Share Posted June 22, 2016 5 minutes ago, PilotAviation said: Okay i understand I only have seen this video: And then i wanted the ground vehicle too. I see your point. To get bit more info please read the second spoiler of the first post on this thread. Link to comment Share on other sites More sharing options...
Stefan bradtke 10 Posted June 22, 2016 Share Posted June 22, 2016 vor 4 Stunden , Premek sagte: @Stefan bradtke Pushback and Ground Handling vehicles will be available in later update. It was stated several times What have that to do with my problem with the Default Buildings you ca see in your LKPR Scenery ? Link to comment Share on other sites More sharing options...
Premek 276 Posted June 22, 2016 Author Share Posted June 22, 2016 2 minutes ago, Stefan bradtke said: What have that to do with my problem with the Default Buildings you ca see in your LKPR Scenery ? Sorry Stefan - I'm using Quote and it does make a mistake sometimes - if you can see my answer it takes this line from previous post. What I wrote as an advice was if you could try to set scenery priority of Mega Airport Prague as highest. Let me please know if it helps. Link to comment Share on other sites More sharing options...
f.skywalker 17 Posted June 22, 2016 Share Posted June 22, 2016 Hi Premek, my mail always returns. Is 12 MB to large. Frank Link to comment Share on other sites More sharing options...
mjansen 7 Posted June 22, 2016 Share Posted June 22, 2016 My frame rate has dropped to 4-5 FPS after installing v1.04, where with v1.03 it was 30+. Using P3D 3.3, i7-6700K, Win10. Any ideas how to fix that? Mark Link to comment Share on other sites More sharing options...
sydney1962 35 Posted June 22, 2016 Share Posted June 22, 2016 Hello , Premek It would be nice , if there will come a configuration tool, that can enable and disable all apc controlled airports separately before starting up P3D and FSX or FSX-SE , because this state of art feature, brings more headaches then fun. Since release of apc controlled aiports split and zurich, there can be written a novel, about this tool. also releasing every week a new version, whats brings others conflicts and makes airports hardly useable it not the first idea I have of flightsimming. pls take in consideration if this tool must be used any longer for future projects, because how more airports are using this tool how more problems we get, because they are all affecting eachother. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.