Jump to content

Tom A320

Aerosoft
  • Posts

    11836
  • Joined

  • Last visited

  • Days Won

    57

Everything posted by Tom A320

  1. RAR is a file compressor, like ZIP. Get yourself WinRAR do extract all files from the RAR archive.
  2. Yes, but this is the English forum area. So we either switch over to the German area or stick with English here, it's your decision. I just figured that you have trouble using the Livery Manager for the A318/A319, so the file in question is of course Livery_Manager_A318_A319.exe.
  3. Please right click the Livery_Manager_A320_A321.exe file, select Properties, switch to the Details page and copy the File version here.
  4. Version 1.0.0

    17603 downloads

    Aerosoft Airbus High Definition Virtual Cockpit Textures from Frost77 Screenshots Day Textures: http://forum.aerosoft.com/index.php?/topic/94035-alternative-vc-textures-darker-with-wear/#entry680405 Screenshots Night Textures: http://forum.aerosoft.com/index.php?/topic/94035-alternative-vc-textures-darker-with-wear/#entry680407 *** BEFORE REPLACING ANY FILE MAKE SURE TO BACKUP THE ORIGINAL ONES *** Installation Instructions: 1. Download all 3 parts and extract them into one and the same temporary folder on your hard drive.2. Copy and Paste "Texture_Fallback_VC" folder to your flight simulator folder: FSX\SimObjects\Airplanes\Aerosoft Airbus A320_A321 Base 3. Copy and Paste two files "AIRBUSX_V2_VC_MAINPANEL_C" and "AIRBUSX_V2_VC_MAINPANEL_L" to your livery folder, e.g.: Texture.AirBerlin_D-ABMS 4. It'very important! Open with notepad fsx.cfg file. It's location: C:\Users\UserNamet\AppData\Roaming\Microsoft\FSX and replace: TEXTURE_MAX_LOAD=1024 to TEXTURE_MAX_LOAD=2048 Have a nice Flight! Thanks, wishes and comments e-mail to: chip_ok@mail.ru
  5. Aerosoft Airbus High Definition Virtual Cockpit Textures from Frost77 View File Aerosoft Airbus High Definition Virtual Cockpit Textures from Frost77 Screenshots Day Textures: http://forum.aerosoft.com/index.php?/topic/94035-alternative-vc-textures-darker-with-wear/#entry680405 Screenshots Night Textures: http://forum.aerosoft.com/index.php?/topic/94035-alternative-vc-textures-darker-with-wear/#entry680407 *** BEFORE REPLACING ANY FILE MAKE SURE TO BACKUP THE ORIGINAL ONES *** Installation Instructions: 1. Download all 3 parts and extract them into one and the same temporary folder on your hard drive.2. Copy and Paste "Texture_Fallback_VC" folder to your flight simulator folder: FSX\SimObjects\Airplanes\Aerosoft Airbus A320_A321 Base 3. Copy and Paste two files "AIRBUSX_V2_VC_MAINPANEL_C" and "AIRBUSX_V2_VC_MAINPANEL_L" to your livery folder, e.g.: Texture.AirBerlin_D-ABMS 4. It'very important! Open with notepad fsx.cfg file. It's location: C:\Users\UserNamet\AppData\Roaming\Microsoft\FSX and replace: TEXTURE_MAX_LOAD=1024 to TEXTURE_MAX_LOAD=2048 Have a nice Flight! Thanks, wishes and comments e-mail to: chip_ok@mail.ru Submitter Tom A320 Submitted 09/05/15 Category FS2004 / FSX / P3D
  6. Or they are on vacation. Don't forget it's summer time
  7. Gentlemen, before posting wishes check the first page please, if your wish is already listed there. No need for double and triple wishes. And please keep in mind not to post copyrighted material
  8. The downloads still having problems after the forum update, but Aerosoft is working on it. http://forum.aerosoft.com/index.php?/topic/96880-how-do-you-like-the-new-forum/&page=4#comment-691815
  9. And as the first post on the first page is already too far away for some users, please let me repeat the following: **VERY IMPORTANT: TO AVOID BREACHING COPYRIGHTS, PLEASE DO NOT INSERT PHOTOS, INSTEAD POST THE LINK TO THE PICTURES**
  10. I just finished a 5 1/2 hours flight From La Palma to Bucharest. During cruise I had constant 70 frames, on arrival in really bad weather (ASN) it was still 35-40 frames. This was a flight with 1.30 hotifx e, no additional patches. No frames problems, no oscillation problems, no over or under speed problems. The final was a bit rough, but that was the weather as well... My System can be found here.
  11. I would like to refer to the reported stutters every 2-3 seconds. I just read about a similar problem in the X-Planes forums where they came up with the following advice: Disable the "Threaded Optimization" within the Nvidia Control Panel If someone here who suffers from the problem could please give it a try and report back? Thanks!
  12. Hello koliko, please read from post #806 on down till your post. Thanks, Tom.
  13. Hello John, I totally agree with what you are saying. When I saw that new livery of WizzAir today I didn't thought too much about where I ask for the repaint or even if really all stuff is already available. I will ask Holgi again, as he did also the original WizzAir livery. Thank you for your detailed answer John! Tom.
  14. I would like to request the new WizzAir livery that was just released: http://www.airliners.net/aviation-forums/general_aviation/read.main/6391846/ http://www.aerotelegraph.com/wizz-air-11-jahre-jubilaeum-neue-bemalung-livery Thanks in advance and thanks a million for the endless number of already available high quality liveries!
  15. Hello Vasily, 1) if at the time the setup has been made and the read me file been written it has been already known that a file is missing, the file would have course been added to the setup. That's what this forum is for: to document problems and provide solutions that can quickly be found by using the search function or Google. 2) Do you really think that from your first post anyone would have been able to pin point the reason for your problem immediately down? We have a saying here in Germany: "afterwards you are always more clever". There could have been a thousand reasons for your low FPS. And Mathijs just asked if you have read the topic to that point to be able to exclude already a few of them (assuming you would have tried already the weather background scan config). At some point one needs to get started to search for the solution, and this point is not always the closest possible one to a problem. 3) In this case it was the bus, i.e. the installer and the config. But that's not necessarily always the case. As I said, there could be tons of different reasons, some related to the bus, some related to other add ons, some related to the hardware, and some are even just mystic and obviously related to sun wind or what ever. Vasily, please don't get me wrong. I am not trying to keep the fault away from Aerosoft. I just try to say that in a complex environment it is nearly impossible to give the finally correct answer already immediately after getting a problem report like yours. One has to start circling around the problem, exclude things step by step to finally pin the problem down.
  16. Dear Vasily, Mathijs stated in his post (132), that if frames go down to 1 (he was referring to a post where this was said) then this can hardly be a problem of the bus, if it works for lots and lots of others. The reason for that must be somewhere on the machine. Even a very strong machine can go down on FPS if add ons start to negatively interfere with each other. For example: when the A318/9 where first time released along with the new WXR it turned out that for some user ASN gave horrible FPS while for others everything was fine with ASN. So, who is to be blamed here? Aerosoft? ASN? What I try to say is, that the answer to your FPS problem is most likely on your machine, and that can't be analysed from the distance (i.e. here in the forum). There simply isn't an answer like "hey, you have problems with FPS, just switch button x from on to off and everything will be fine". From the formatting I would guess that's the WXR part, right? But that does not suit into this topic.
  17. Vasily, you refer to a post before yours. I actually don't see the connection ... As a direct response to the several items in your post you were asked not to mix up items in this topic but to open own topics for them. This is still the case, so please follow that advice.
  18. You miss an important point: Chiel just blamed and blamed and blamed, and haven't helped working constructively on the problem. No one ever said here that he is the only one with this problem, but without being able to reproduce it on our side there is not very much direct help possible. And what does it tell if a problem doesn't show up on all machines, but only a few ones? It tells that it is not a general problem but obviously something that shows up only on a very specific set of environment parameters. And that's what Mathijs told Chiel several times and he refused to listen. The problem doesn't show up on any AS machines or the beta testers machines. Therefore the only chance to find it is on HIS computer. Right? So instead of continuous blaming it would have been a more wiser thing to be cooperative in the search for a solution. And finally: YES, it is correct to tell a customer that a problem is related to HIS machine. As it doesn't show on all machines, but only a few ones, the reason for that must be on HIS machine. Something on it causes it. This is not an excuse but a pure logical explanation.
  19. That's exactly what Mathijs told you multiple times in this topic: it's about what is installed on YOUR system.
×
×
  • Create New...