You need an axis to fully control the CRJ throttle.  And this axis needs to be assigned to the "THROTTLE AXIS" function in the sim. That is why you can't have full control with you setup and why nothing shows up on the EFB throttle calibration page.

First, thanks for your reply… I am using the Xbox default controller buttons. A for increasing Throttle, B for decreasing. See shot #1 from the controls tab of the sim. The next shot is of the calibration page of the CRJ without any changes. The raw data field does not show anything when the A or B buttons are pressed. If I try to go into the throttle position area and try to change say TOGA and press set, the value 0 will show and despite moving the throttle to the TOGA indent, there is no change. When I press validate, the 3rd shot shows the errors. Finally I’m showing what the sim HUD looks like with the throttle gauges. I did discover if I use the default Xbox Engine Cut Off binding, which is the Right button and on the D pad the left “press” the engines will shut down. Thanks for your help.

Please login to display this image.

Please login to display this image.

Please login to display this image.

Please login to display this image.

Had a ticket in to Microsoft asking, after 4 weeks, where is the CRJ V2 in Marketplace.  Their reply, you need to ask Aerosoft. So Aerosoft, where is it?

I don't really know how to call it, but they are probably meant to be moving right? to show me the throttle power I am putting.

Please login to view this video.

In flight, the stab trim never stabalized, and the aircraft bounces all over the place. Is there a fix for this?

Please login to view this video.

I have a dozen flights now in 2024 with the CRJ v2.  Amazing! Nothing else to add. 

Die Version 1.7.5 der FF A320U zeigt bei mir in X-Plane 12 einen merkwürdigen Effekt: Wenn man nach dem Laden des Flugzeugs die Location wechselt (ein anderer Airport oder auch nur ein anderes Gate), dann funktioniert die Beleuchtung der Buttons (z.B. Battery oder APU im Overhead Panel) nicht mehr. Die Buttons selbst funktionieren noch (die APU lässt sich starten), aber man kann nicht mehr erkennen, ob ein Button ein- oder ausgeschaltet ist. Habe nur ich diesen Effekt?

@Capt Shark, thank you for explaining the correct procedure, very helpful, everything noted, didn't know about the arrow and wasn't doing things in the correct order, now more confident to try again, looking forward to next flight, will report back. Also, thanks for mentioning YourSimCFI's Discord and YouTube channels, already joined and subscribed. Only bought the CRJ a few weeks ago and have been learning by watching YourSimCFI's videos and 'Come Fly With Me', tutorial series by The Dude (Ep8: Approaching Munich!)

Same here. MSFS2020, installed V2 from the Marketplace yesterday.   After the first (supposed) WASM crash (CDU and all AP inputs unreactive, rest of sim running normally) in V2, I found out, that V1 was still installed. Uninstalled V1 manually, shut down the sim, installed current nav data (so that it is in synch with the sim), but again had V2 freeze during flight preparation at some point.   Any suggestions which cached files I should delete? I could imagine that they are a horrible mess now.   I will cross check with MSFS2024 the next days. (Currently I use 2024 only for GA flying because of extended laziness on my part to properly migrate my excessively large collection of airport sceneries.)   Edit: Just read in another thread, that it might be related to the N324PQ livery (Delta operated by Endevor). Next try tonight will be a different livery.

Looks like it was operator error. I was filling out the perf page before the flight plan page. When I went back to the perf page during my flight, there were many entries that had been erased.