Ricard 0 Posted September 18, 2010 Share Posted September 18, 2010 Hello all I think that i find a mistake in the Barcelona airport. See the image attached (runway 07 L) and say what's your opinion about the double ILS. Thanks. Ricard PD: The scenery is awesomeBarcelona_07L.bmp Link to comment Share on other sites More sharing options...
Manuel EBCI 23 Posted September 18, 2010 Share Posted September 18, 2010 I test all approches without issue and I have all add-on on a medium PC ... Very very good FPs ... thank you Aerosoft ...very pleasent scenery and the AES lite is fantastique. For all ... if you have old add-on from Italian ISD Project "Punta Raisi" ... some time this add-on make a trouble on spain territories in area Barcelone and Madrid ... dissable this scenery and test again ... Link to comment Share on other sites More sharing options...
Ray Proudfoot 231 Posted September 18, 2010 Share Posted September 18, 2010 Since Flamingo said he had a CTD while flying the iFly 737, you guys should know that several users have CTDs while on approach with the iFly 737. Why not fly the same approach with a default 737 and see if the problem persists? If it doesn't then the problem may lie with the iFly. Just a thought. Link to comment Share on other sites More sharing options...
Mike Strasser 6 Posted September 18, 2010 Share Posted September 18, 2010 Hello all I think that i find a mistake in the Barcelona airport. See the image attached (runway 07 L) and say what's your opinion about the double ILS. Thanks. Ricard PD: The scenery is awesome Hello Ricard Yepp, looks very strange indeed, but it's the real configuration as you can see on the attached picture. Link to comment Share on other sites More sharing options...
salmezze 0 Posted September 18, 2010 Share Posted September 18, 2010 Hi, what follows is the report of 2 or 3 CTDs: Nome evento problema: APPCRASH Nome applicazione: fs9.exe Versione applicazione: 9.1.0.40901 Timestamp applicazione: 4135a208 Nome modulo con errori: nvd3dum.dll Versione modulo con errori: 8.17.12.5896 Timestamp modulo con errori: 4c378e88 Codice eccezione: c0000005 Offset eccezione: 00334308 Versione SO: 6.1.7600.2.0.0.768.3 ID impostazioni locali: 1040 Informazioni aggiuntive 1: 0a9e Ulteriori informazioni 2: 0a9e372d3b4ad19135b953a78882e789 Ulteriori informazioni 3: 0a9e Ulteriori informazioni 4: 0a9e372d3b4ad19135b953a78882e789 ------------------------- Nome evento problema: APPCRASH Nome applicazione: fs9.exe Versione applicazione: 9.1.0.40901 Timestamp applicazione: 4135a208 Nome modulo con errori: FE.DLL Versione modulo con errori: 9.1.0.40901 Timestamp modulo con errori: 4135a88e Codice eccezione: c0000005 Offset eccezione: 0000326a Versione SO: 6.1.7600.2.0.0.768.3 ID impostazioni locali: 1040 ---------------------- Nome evento problema: APPCRASH Nome applicazione: fs9.exe Versione applicazione: 9.1.0.40901 Timestamp applicazione: 4135a208 Nome modulo con errori: StackHash_fb8b Versione modulo con errori: 0.0.0.0 Timestamp modulo con errori: 00000000 Codice eccezione: c0000005 Offset eccezione: 00000000 Versione SO: 6.1.7600.2.0.0.768.3 ID impostazioni locali: 1040 Informazioni aggiuntive 1: fb8b Ulteriori informazioni 2: fb8bd1bf7dcc44d047c58f37f56ad727 Ulteriori informazioni 3: fa63 Ulteriori informazioni 4: fa63c80ebf2b9d98cfa9fc211d9a92ad Regards Sal Mezzetti Link to comment Share on other sites More sharing options...
altstiff 28 Posted September 18, 2010 Share Posted September 18, 2010 Might be something to do with the way the IFly SIDS/STARS mix with the LEBL scenery. We had this problem with EGLL/PMDG planes a few years back due to this issue. Link to comment Share on other sites More sharing options...
Er!k 572 Posted September 18, 2010 Share Posted September 18, 2010 I noticed the ground disappearing when using the topdown view. Strange enough, lines are visible. Can this be fixed? What about this issue? Link to comment Share on other sites More sharing options...
GingerSnap 0 Posted September 18, 2010 Share Posted September 18, 2010 To add. When I had my CTD issues, I was using either a default C152...the Wilco/FT A320 or the Captain Sim 757. Link to comment Share on other sites More sharing options...
GingerSnap 0 Posted September 18, 2010 Share Posted September 18, 2010 Update on my personal CTD issue. I just did a re-install of FS9 and installed BCN after UT Europe, Ground Environment 2006 & UK2000 Xtreme airports...and no CTD thus far. Link to comment Share on other sites More sharing options...
flamingo 0 Posted September 18, 2010 Share Posted September 18, 2010 See my previous report on CTD ILS 07R. Same happened ILS 07L at 500 ft . In the meantime found out that CTD 's occur in various situations and with different a/c ( not only Ifly) and also upon departure e.g. positioning a/c at gate etc etc Link to comment Share on other sites More sharing options...
romeocharlie 36 Posted September 18, 2010 Share Posted September 18, 2010 Is fe.dll causing your CTD? If so, you'll need to check textures for AI aircraft that are dominant at BCN, such as Iberia, Vueling, Spanair and Air Europa. I was getting regular CTDs at Madrid until I eventually found an Air Nostrum CRJ with a dodgy texture. Rob Link to comment Share on other sites More sharing options...
alpet 0 Posted September 18, 2010 Share Posted September 18, 2010 Hi all! Did you see some ships from the seaport parked on the Montjuik mountain? I have such bug with UTEurope installed. Link to comment Share on other sites More sharing options...
Antwerpen 0 Posted September 18, 2010 Share Posted September 18, 2010 Hi , Today I did several tests and flights , in combination with PMDG B737-800 , FsPassenger , ActiveSky and WoAI , concerning Barcelona X FS9. During day-flights (3 flights) : no problems at all. During night-flights (5 flights) : all the the time CTD's during taxiing before take-off and after landing. CTD's without messages. I don't know what went wrong. Kindest regards , Tom. Link to comment Share on other sites More sharing options...
GingerSnap 0 Posted September 18, 2010 Share Posted September 18, 2010 I think the dodgy texture is possibly the post plausible answer. I'll go checking from some dodgy textures when I get my AI back up and running. Link to comment Share on other sites More sharing options...
Antwerpen 0 Posted September 18, 2010 Share Posted September 18, 2010 Hi All I also had CTD problems immediately when loading the scenery, but only if the flight is started in the morning. If it was an afternoon flight there were no problems. So I checked my World of AI aircraft. I have the latest Spanair package and one of the textures for an A320 was in 32 bits. I converted this to DXT3 and then started the flight again at exactly the same time, and now there is no CTD. So I would advise anyone who has WOAI packages to check that there are no 32bit textures. This may not be the reason for other peoples CTDs, but the solution worked for me. Best regards James Hi James , It is off-topic , I know , but , please , can you tell us how to convert 32bits to DXT3 ? Thanks a lot in advance. Kindest regards , Tom. Link to comment Share on other sites More sharing options...
GingerSnap 0 Posted September 18, 2010 Share Posted September 18, 2010 Hi James , It is off-topic , I know , but , please , can you tell us how to convert 32bits to DXT3 ? Thanks a lot in advance. Kindest regards , Tom. Find a program such as dxtbmp...it's free to get and you'll be able to convert the textures with that. Link to comment Share on other sites More sharing options...
GingerSnap 0 Posted September 18, 2010 Share Posted September 18, 2010 Just put back in my AI...and bingo...CTD within seconds. Took out my Spanish AI traffic and the problem was no longer there. Installed one by one...Air Europe then Iberia. No problems thus far. Put back in Spanair...and bam..CTD. I've pretty certain then, that the problem lies within the Spanair WOAI package. Link to comment Share on other sites More sharing options...
Silverbird 15 Posted September 19, 2010 Share Posted September 19, 2010 Just put back in my AI...and bingo...CTD within seconds. Took out my Spanish AI traffic and the problem was no longer there. Installed one by one...Air Europe then Iberia. No problems thus far. Put back in Spanair...and bam..CTD. I've pretty certain then, that the problem lies within the Spanair WOAI package. I had also cdt with Madrid and it was the ai traffic so if some people get crashes its good too always try it again with ai traffic to zero just to make sure its not something in the ai. Link to comment Share on other sites More sharing options...
romeocharlie 36 Posted September 19, 2010 Share Posted September 19, 2010 During night-flights (5 flights) : all the the time CTD's during taxiing before take-off and after landing. Tom. Sounds to me you might want to go hunting for either corrupted lightmap textures, or AI aircraft which are missing lightmaps. And yes, I think there's a Spanair in the WOAI package that has been flagged before for being a bit iffy. If in doubt, look for 4,000(ish)kb textures and convert them to DXT3 - the approx size with mips will be 1,366kb, or without mips it'll go to 1,025kb. Rob 1 Link to comment Share on other sites More sharing options...
I.J. 2 Posted September 19, 2010 Share Posted September 19, 2010 Just put back in my AI...and bingo...CTD within seconds. Took out my Spanish AI traffic and the problem was no longer there. Installed one by one...Air Europe then Iberia. No problems thus far. Put back in Spanair...and bam..CTD. I've pretty certain then, that the problem lies within the Spanair WOAI package. Quite possible. There was a similar problem discussed here at the time the LEMD scenery was out. Look into your Flight Simulator 9\Aircraft\WoA_EVAI_A320-200_IAE folder. If you see a Spanair texture folder heavier than 1.25Mb, it's very probably the black sheep. Anyway, DXTBmp solved it for me. Wish you well, Iouri Oops! Rob was faster! 1 Link to comment Share on other sites More sharing options...
Seberl767 0 Posted September 19, 2010 Share Posted September 19, 2010 Gentlemen, had the same issue with the CTDs and it was caused by one of the Spanair A320-200 IAE textures (one of the the special liveries, like "city of valencia"...). As said before the texture is 32bit instead of 3DXT and therefore causes the CTDs. You can identify the faulty texture by opening it with the standard windows picture preview program - if you are able to open it w i t h o u t an error message (something like "unable to open"), you've found it.... Hope this helps. Best regards, Sebastian Link to comment Share on other sites More sharing options...
flamingo 0 Posted September 19, 2010 Share Posted September 19, 2010 Indeed everything working fine after Spanair WoA1 4mb texture removed. Thanks a lot those guys who knew where the problem was and thanks to the designers of Barcelona El Prat for another wonderful sceneray again! Best regards Link to comment Share on other sites More sharing options...
CTocco 2 Posted September 19, 2010 Share Posted September 19, 2010 Well, it still not working for me, I removed all my other Spanish Airports (IBZ, PMI, MAD, MAH) and left only BCN (also removed the WoAI Spanair package) and I am still getting CTDs I am starting to get pretty annoyed at this. This the last log from EventViewer Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: fs9.exe P2: 9.0.0.30612 P3: 00534d69 P4: G3D.DLL P5: 9.0.0.30612 P6: 3ee946b8 P7: c0000005 P8: 00014b26 P9: P10: I am going to try deleting the FS9cfg file and let FS create a new one when launched, maybe it will sort itself out... if it does not work... 25 euros down the drain Ctocco. Link to comment Share on other sites More sharing options...
Seberl767 0 Posted September 19, 2010 Share Posted September 19, 2010 Hi CTocco, just out of interest - have you tried to go to LEBL with zero AI traffic? Maybe it is not only the Spanair package? Regards, Sebastian Link to comment Share on other sites More sharing options...
Manuel EBCI 23 Posted September 19, 2010 Share Posted September 19, 2010 Ctocco Yes, in old time I have the same problem with an another compagnie ... and with Spanair also ... I solve this problem when Madrid is release. In first ... test with A.I. at "0%" ... (in 80 % most case, A.I. is responsible CTD ) In other 20 % case, yes is possible some time a conflit with another scenery ... In second test, deactivate one by one in the library your another scenery for to isolate the intruder. Begin by the free scenery <. Another ... look with AFCAD programme if you not have an another old LEBL AF2 files ... Link to comment Share on other sites More sharing options...
Recommended Posts