Er!k 572 Posted December 13, 2016 Share Posted December 13, 2016 Hi Premek, I am still having issues when flying from another APcontroller airport to LKPR (missing ground textures, gates etc.). I also asked Aerosoft to look into it. I already provided my config files. Any clues? Link to comment Share on other sites More sharing options...
Premek 276 Posted December 13, 2016 Author Share Posted December 13, 2016 @Er!k Hi Erik, did you applied the 'Jetways missing on arrival' patch from first post please? Link to comment Share on other sites More sharing options...
Er!k 572 Posted December 13, 2016 Share Posted December 13, 2016 Yes, I did. Version is 1.0.26.60731 Link to comment Share on other sites More sharing options...
otooleg 1 Posted December 13, 2016 Share Posted December 13, 2016 Hi I am having issues with Airport runways, taxiways and parking ramp marking all missing on the Prague install? See attached images. I have followed the instructions to reset REX Texture Direct - i.e. remove LKPR which resolved some off the issues but not the markings? I am running the following software: REX Essential Plus Overdrive. REX Texture Direct. REX Worldwide Airports. REX Soft Clouds. REX Marketplace. ORBX FTX Global Base Pack. FTX Global openLC Europe. FTX Global Vector. Advice gratefully received. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Premek 276 Posted December 14, 2016 Author Share Posted December 14, 2016 @otooleg Did you contacted Aerosoft support? 11 hours ago, Er!k said: Yes, I did. Version is 1.0.26.60731 @Er!k Okay, thanks for an update. Check the mailbox please. Link to comment Share on other sites More sharing options...
otooleg 1 Posted December 14, 2016 Share Posted December 14, 2016 Yes I have just sent the same details through to Aerosoft Support - thanks Premek. Link to comment Share on other sites More sharing options...
stijnsarah18 1 Posted December 14, 2016 Share Posted December 14, 2016 hallo all, i also have the problem with no taxiways signs, no markings, very blurry ground textures.. (like the picture above) i m using p3dv3 latest hotfix... i m folowing to get an answer. nothing from this toppic helped! Link to comment Share on other sites More sharing options...
otooleg 1 Posted December 14, 2016 Share Posted December 14, 2016 I just want to confirm the issue here - No runway or taxiway marking despite awesome graphics? George Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Premek 276 Posted December 15, 2016 Author Share Posted December 15, 2016 On 14. 12. 2016 at 1:03 PM, stijnsarah18 said: hallo all, i also have the problem with no taxiways signs, no markings, very blurry ground textures.. (like the picture above) i m using p3dv3 latest hotfix... i m folowing to get an answer. nothing from this toppic helped! Did you send the config files? Link to comment Share on other sites More sharing options...
Premek 276 Posted December 15, 2016 Author Share Posted December 15, 2016 @otooleg Check your PM Link to comment Share on other sites More sharing options...
Sascha Sterzing 1 Posted December 17, 2016 Share Posted December 17, 2016 Hi, i see that many People have this Problem. I sent my Pics to the Support, but no Answer. Kind Regards Sascha Link to comment Share on other sites More sharing options...
Premek 276 Posted December 17, 2016 Author Share Posted December 17, 2016 @Sascha Sterzing Check your mailbox please. Link to comment Share on other sites More sharing options...
pgreenwo 117 Posted December 17, 2016 Share Posted December 17, 2016 24 minutes ago, Premek said: @Sascha Sterzing Check your mailbox please. Hi Premek Is there a fix your sending to people as above? - I have tried everything noted in the thread to no avail. Link to comment Share on other sites More sharing options...
Premek 276 Posted December 17, 2016 Author Share Posted December 17, 2016 @pgreenwo No, unfortunately there is no such fix. Did you also try to contact Aerosoft support? Link to comment Share on other sites More sharing options...
stijnsarah18 1 Posted December 21, 2016 Share Posted December 21, 2016 Same for me, no solution, no fix... i updated p3dv3 to hotfix 2 also GSX... nothing helps... Link to comment Share on other sites More sharing options...
data63 421 Posted December 25, 2016 Share Posted December 25, 2016 From my side it's looking to be a problem if LSZH is installed in the newest version. If so the MA Prag installer seems to find a current APC version and doesn't install all the additional files needed for LKPR. Unfortunatly after getting that right I also have that missing APC Objects error when coming in from another APC airport (LSZH, LDSP) no difference if flying or just switching from LSZH/LDSP to LKPR via the "goto Airport" menu. (FSX-SE) Link to comment Share on other sites More sharing options...
Sandro Vitalini 57 Posted December 30, 2016 Share Posted December 30, 2016 Hello! I have P3D v3.4 with the latest Hotfix 2 and latest Prague version 1.05, latest Sode 1.4.1. I was in contact with Support a while a go cause i had the usual no Jetways, no Ground Textures Problem. An updated version (i think it was 1.03 or 1.04) then resolved the problem. A while ago i installed the latest 1.05 version and now the problem is back. Again no Groundtextures. When i co to Task Manager, APC is running. I tried to close it and open it manually but no luck. I also deactivated APC from starting with the sim and then started it manually but still no luck. I checked XML files and sceneryobject entries and everything seems correct. I would really hope for a fast solution for this problem caus this scenery is really good but this whole APC thingy is just a complete mess. Latest version of MA Zurich works fine. thanks and a happy new year! Link to comment Share on other sites More sharing options...
mcnobody 13 Posted December 30, 2016 Share Posted December 30, 2016 Hello. I just bought Mega Airport Prague yesterday and I do have the excat same issues. Blurry ground textures, taxilines and jetways missing. I already tried the fixes in the first post and even uninstalled GSX without any effect. I also have the latest version of Zurich installed. I am running FSX:SE. A fix would be awesome. Thanks and Happy New Year. C. Link to comment Share on other sites More sharing options...
ondrakuzila 0 Posted December 31, 2016 Share Posted December 31, 2016 Hello, I have problem with Missing buildings ... How to fix this problem ?? :/ 2016-12-31_0-6-1-73.BMP 2016-12-31_0-5-39-79.BMP 2016-12-31_0-5-53-234.BMP Link to comment Share on other sites More sharing options...
Premek 276 Posted December 31, 2016 Author Share Posted December 31, 2016 @ondrakuzila Do you use ORBX Vector? Link to comment Share on other sites More sharing options...
Premek 276 Posted December 31, 2016 Author Share Posted December 31, 2016 Hi all Keep you updated - right now I'm working on troubleshooting tool which will check your computer when you're experiencing any kind of issues very similar way as I do when checking user's configuration via TeamViewer. I hope this should speed up fixing any issues on your configurations. Let me also wish to all of you only the best to year 2017 :-) Premek Link to comment Share on other sites More sharing options...
mcnobody 13 Posted December 31, 2016 Share Posted December 31, 2016 For those of you who are experiencing missing ground textures and jetways and who have got the latest version of Mega Airport Zurich V2.0 (1.04) installed, the following procedure fixed these issues for me. First of all uninstall both sceneries, Mega Airport Zurich V2.0 and Mega Airport Prague. Start Flight Simulator X to ensure that the scenery library is reloaded and close it. Make sure to remove the complete AirportController folder under: [you Flight Simulator directory]\Aerosoft\ Install Mega Airport Prague (1.05) first. Start Flight Simulator X again in order to load thre scenery library and check if you see the ground textures and jetways at LKPR. Close Flight Simulator X. Install Mega Airport Zurich V2.0 (1.04). Start FSX and check if both airports work properly. I hope those steps help you as well. Best regards, C. Link to comment Share on other sites More sharing options...
data63 421 Posted December 31, 2016 Share Posted December 31, 2016 vor 26 Minuten, mcnobody sagte: For those of you who are experiencing missing ground textures and jetways and who have got the latest version of Mega Airport Zurich V2.0 (1.04) installed, the following procedure fixed these issues for me. First of all uninstall both sceneries, Mega Airport Zurich V2.0 and Mega Airport Prague. Start Flight Simulator X to ensure that the scenery library is reloaded and close it. Make sure to remove the complete AirportController folder under: [you Flight Simulator directory]\Aerosoft\ Install Mega Airport Prague (1.05) first. Start Flight Simulator X again in order to load thre scenery library and check if you see the ground textures and jetways at LKPR. Close Flight Simulator X. Install Mega Airport Zurich V2.0 (1.04). Start FSX and check if both airports work properly. I hope those steps help you as well. Best regards, C. fits to my findings that the LSZH V2 insllation somehow messed up the APC config. Did you experience the missing jetway/texture problem when flying into EKPR from another APC airport before/after your reinstall? Link to comment Share on other sites More sharing options...
ondrakuzila 0 Posted January 1, 2017 Share Posted January 1, 2017 On 31. 12. 2016 at 1:18 PM, Premek said: @ondrakuzila Do you use ORBX Vector? Yes, I use ORBX Vector, and I have LKPR disable... Link to comment Share on other sites More sharing options...
stijnsarah18 1 Posted January 1, 2017 Share Posted January 1, 2017 i tried the fix with uninstalling zurich v2 but no solution fo rme! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.