Leaderboard


Popular Content

Showing content with the highest reputation on 12/15/18 in all areas

  1. 3 points
    233T, but don‘t let those two tons stop you if you want to take them with you.
  2. 2 points
    Hello, we´re going to see if we get from somewhere a different source but unfortunately with this one we can´t support Tropopause, sorry. Best regards, Judith
  3. 1 point
    San Diego...with Spirit Airlines, the budget side of life! Scenery could be better (Orbx Stockholm is superior) but is not up to FlyTampa, Flightbeam and now Aerosoft (Koln-Bonn) standards. Thanks for viewing, Darryl
  4. 1 point
    Please run the following installer again (make sure to do it as administrator): SupportFiles\vc_redist.x64.exe
  5. 1 point
    Very many thanks to those of you who contributed to my predicament in a constructive way. Going back to my original post and digesting the much appreciated advice I decided a self build with such a small budget was too big a risk for me, I obtained the workstation for €105, my income and circumstances allow me to go no further. Even I myself scoffed at this machine but it was my only option to keep flying, having put up with my previous machine for so long I have learnt so much by having so little to work with if you get my drift, It's never looked pretty with all the sliders on low and no weather, however I've have had the opportunity to get to know the Bus very well, just, and for that I am grateful, maybe in the future I'll be ready for some decent visuals, the HPZ10 is just a cheap replacement to keep me on radar!
  6. 1 point
    I do not disagree with you I also think it might be a makeover so it becomes a bit more realistic but also more beautiful landscape. But if I know Aerosoft right then we're two at the wrong forum and discuss so we'll probably have to move over here under: Train/Bus/Airport/tool thread here: https://forum.aerosoft.com/index.php?/topic/111371-request-an-trainbusairportaircrafttool-thread/&page=18&tab=comments#comment-914405 or here: https://forum.aerosoft.com/index.php?/forum/107-aerosoft-scenery/
  7. 1 point
    Shouldn't be the question the other way around? Or how do you expect a product that is already on the market for over a year to claim compatibility with a product that isn't? Please head over to Orbx and ask them.
  8. 1 point
    @FlightSimSoft.com any news?
  9. 1 point
    Also "Fly by wire" bedeutet, dass das Flugzeug bzw die Steuerflächen nicht mehr über Steuerstangen oder Seilzüge gesteuert wird. Das geschieht über elektronische Impulse die an die Stellmotoren von dem/den Computern gesendet werden. Das ist jetzt mal ganz "einfach" erklärt! Wenn Flybywire wie von dir beschrieben ausfällt, dann ist das der "GAU" für die Besatzung und die Passagiere! Gruß Hermann
  10. 1 point
    We just had two of our Beta Testers fly the same route, no issues whatsoever. A few things you might look at: 1. What was your Cost Index set to? Try 35 if you were using something different. 2. Did you perform Wind Updates before departure and before descent? 3. Was the aircraft very heavy? 4. Did the aircraft achieve 250 knots by LAM? 5. What was your route from LAM to the Runway, and which runway were you inbound for? Chart says that aircraft is not to proceed past LAM without ATC clearance, so the issue you had might be related to what you did after LAM. Looking forward to hearing back from you! Best wishes!
  11. 1 point
    Die "Klappscheibe" HUD ist bei mir immer standardmäßig hochgeklappt, ohne das ich dafür etwas besonderes eingestellt habe. Die Announcements kannst Du im AVITAB einstellen. AVITAB / PA SYSTEM / PA SETTINGS dort kann die Lautstärke eingestellt werden. Wenn Du die Tür des Cockpits geöffnet hast, kannst Du die Ansagen etwas besser verstehen. Aber pass auf, dass Du nicht überfallen und entführt wirst Gruß Reiner
  12. 1 point
    I just flew that procedure and did not see that issue. Can you try it with the Lufthansa nav data? Could simply be a database issue.
  13. 1 point
    Jammin, I'm going to answer most of your Private Message to me here in the forums, so that others will benefit from the questions and answers. People new to flight simulation aren't aware, but flight sim has been around for over 37 years and we've had an online community for most of that time. So lots of questions have been asked and answered online, and a simple Google Search can provide you immediate answers as aposed to posting a question in a forum and having to go through a lot of explanation and wait several days for the answer you're looking for. This is because nobody knows your system and how you have it configured better than you do, but all that info has to be provided in order to get an answer that is helpful to you. That said, I am not trying to discourage you from posting questions or seeking help, you are always most welcome to do that. I wrote the above to help you get at least some answers immediately. Case in point, you're new to P3D and asked me how to reset your P3D shaders, and a Google search would have provided you the answer immediately. I'm also very happy to answer the question for you. There are two Shaders folders in P3D, one is located in your Main P3D folder and this one you never, ever want to touch. The other is located in your C:\Users\[YOUR USERNAME]\AppData\Local\Lockheed Martin\Prepar3D v4 folder and is named "Shaders". To reset your shaders, simply delete this folder and it will be rebuilt the next time you start P3D. This should be done anytime you install or update Graphics Card drivers or an aircraft that uses RealLight and/or TrueGlass (such as the Airbus Pro, Leonardo MaddogX or TFDI B717, etc.). The AppData folder and sub-folders are hidden by default in Windows, so you will have to make Hidden Folder/Files visible in Windows before you will see them. Regarding your question about Monitor Calibration, you simply have to Google "Monitor Calibration" and you'll find both payware and freeware software, and even some hardware, to help to calibrate your monitor(s). For freeware, I recommend Calibrize. Note however that you may not need to do this after resetting your shaders as that may resolve the issue for you while the aircraft is on the ground. My very best wishes.
  14. 1 point
    Dieses Problem konnte gelöst werden, indem ich in der Datei Prepar3d.cfg im Abschnitt [sound] die Zeile time_constant=0; hinzugefügt habe. Vielen Dank und viele Grüße Lucas
  15. 1 point
    Then you know best that a quick a dirty fix has nothing to do with giving your best
  16. 1 point

    Version 1.00

    875 downloads

    Here it is People! After weeks if tweaking and changing, testing, and so on here it is the SAS OFP template! This Template is made from the real SAS OFP Without ETOPS planning since we will make a new one with ETOPS information based from SAS IC. Widerøe is using the same template as SAS If you are gonna use WIF just simply make a copy there the file is named WIF Hope you guys are enjoying it as much as we do!
  17. 1 point
    Du kannst auch einfach das Flugzeugsymbol in der X-Plane Karte anklicken und dann auf der Karte frei verschieben, Höhe, Richtung und Geschwindigkeit ändern. Dazu ist kein Plugin nötig...
  18. 1 point
    please help how to add qw787 a/c to pfpx
  19. -1 points

    Version 1.0.0

    1186 downloads

    China Eastern Airlines Corporation Limited,is an airline headquartered in the China Eastern Airlines Building, on the grounds of Shanghai Hongqiao International Airport in Changning District, Shanghai, China. It is a major Chinese airline operating international, domestic and regional routes. Its main hubs are at Shanghai Pudong International Airport and Shanghai Hongqiao International Airport, with secondary hubs at Kunming Changshui International Airport and Xi'an Xianyang International Airport. China Eastern Airlines is China's second-largest carrier by passenger numbers. China Eastern and its subsidiary Shanghai Airlines became the 14th member of SkyTeam on 21 June 2011. To install this aircraft manually, Copy the following text into your 'aircraft.cfg', inside the folder 'SimObjects\Airplanes\Aerosoft Airbus X A320 Extended CFM NEO'. Replace the XX in [FLTSIM.XX] by the following number in your Aircrafts List for Airbus X Extended [fltsim.xx] <<-- Replace 'xx' with the following Number title = Airbus A320 NEO China Eastern sim = A320S model = panel = sound = texture = China Eastern New_B-1610 kb_checklists = AirbusA321_check kb_reference = AirbusA321_ref atc_id = B-1610 atc_airline = China Eastern atc_flight_number = ui_manufacturer = Airbus ui_type = A320-214 CFM Sharklets ui_variation = China Eastern ui_typerole = Commercial Airliner ui_createdby = Aerosoft atc_parking_types = GATE description = Airbus X Extended - A320 CFM NEO / China Eastern New by Captain Gunadeep for Airbus X To install this aircraft manually, Copy the following text into your 'aircraft.cfg', inside the folder 'SimObjects\Airplanes\Aerosoft Airbus X A320 CFM NEO'. Replace the XX in [FLTSIM.XX] by the following number in your Aircrafts List [fltsim.xx] <<-- Replace 'xx' with the following Number title = Airbus A320 NEO China Eastern sim = A320 model = SHARKLET panel = sound = texture = China Eastern New_B-1610 kb_checklists = AirbusA321_check kb_reference = AirbusA321_ref atc_id = B-1610 atc_airline = China Eastern atc_flight_number = ui_manufacturer = Airbus ui_type = A320-214 CFM Sharklets ui_variation = China Eastern ui_typerole = Commercial Airliner ui_createdby = Aerosoft atc_parking_types = GATE description = Airbus X Extended - A320 CFM NEO / China Eastern New by Captain Gunadeep for Airbus X users not the EXTENDED Model Replace the texture.cfg file in this texture with the following Lines [fltsim] fallback.1=..\..\Aerosoft Airbus A320_A321 Base\Texture_Fallback_VC fallback.2=..\..\Aerosoft Airbus A320_A321 Base\Texture_FallBack_A320 //fallback.2=..\..\Aerosoft Airbus A320_A321 Base\Texture_FallBack_A321 fallback.3=..\..\..\..\Scenery\Global\texture fallback.4=..\..\..\..\..\..\Scenery\Global\texture and its done.
  20. -1 points

    Version 1.0.0

    2001 downloads

    The livery package include 5 birds, for Aerosoft Airbus A320/A321. - ANA Airbus A320 Family Pack - A320-200 (JA8396) A320-200 (JA8609) A320neo (JA211A) A321-200 (JA107A) A321ceo (JA111A)
  • Newsletter

    Want to keep up to date with all our latest news and information?

    Sign Up