Netflix is one of the most popular streaming platforms worldwide. If you are using such streaming platforms, then some issues are obvious. It could be a network issue, server outage, device issue, or it may even be the network issues in your home, etc. Well, whatever the reason it could be, when you plan to stream your favourite shows, then working on to is very important.   There are a bunch of ways that can help you when you have questions like ‘Why is Netflix Not Working?’. Fix Your Internet Connections First: If you are getting errors in your Netflix subscription, then first you have to check your internet connection and your WiFi router. Make sure it works in a good way. Check Server Outage: It could be the reason for this; you have to identify it using various tools online. Restart Your Device: You can restart your device and go back to it; it may help you fix your error. Sign Out and Back Sign It: If nothing is working for you, you can follow this, and it may surely work for you. Apart from this, I have provided the link in this section. Its link will help you to get an appropriate guide with visuals. 

Looks like it was operator error. I was filling out the perf page before the flight plan page. When I went back to the perf page during my flight, there were many entries that had been erased.

Flew same jet, same livery from KASE to KJAC for a check.  Everything was great.  No freeze no nothing.  1.5ish hours and all good.  The only time I noticed that there was some weird "slowing down" was when I clicked on the charts and it tried to show the high alt IFR charts.  I quickly selected my STAR chart which was pinned and then left that open the rest of the flight and had no issue.  If I have time I'll look to see if that navigraph "no chart, but long range" stuff makes it freeze up again.     (Pics are of pre departure and then chasing my buddy down in his lear 35.)  

Please login to display this image.

Please login to display this image.

What kind of control signal are you using for the throttle ?  Is this an axis or a contact (button) How is it assigned in the simulator ? (Screenshot of the controls bindings are welcome)

Good day I just downloaded the CRJ for Xbox X and I am using the Xbox controller. It MOSTLY works, except for a couple of  issues: 1 I cannot get the throttle to go past the idle indent to shut off the engines. 2. The calibration page does not seem to recognize the controller? 3. While using the HUD display on either the external or cockpit view, the engine gauge does not show any values…ie percentage of engine rpm etc. Any suggestions? Thanks

First off, make sure you are flying from the proper side. I fly from the captain's side so make sure the "arrow" on the PFD is pointing Left, then make sure you have the ILS tuned in. I do this on both sides and ensure that CDU is MAN settings. As you near the intercept, change the NAV source to LOC1 or 2 depending which side you are flying on. This is done by turning the Nav source knob "inboard." The side active may be initially be red, but should turn to green. If it's yellow, that is not the active side. Once captured press the Approach button.  Remember to set the CRS as well.   If you are on Discord, join this server. The guy that runs that page is a real world CRJ pilot and streams a lot of videos.  https://discord.gg/q3GyyFQw   Watch his tutorial here:  

Hallo Stefan, hallo Andre.   Danke für euren Beitrag. Freut mich ,wenn euch der Flug, und das drumherum gefallen hat.    Gruß Hermann 

Hello, SIM WINGS developers. I purchased this airport a few days ago and noticed an error that another user, "airbadger," already mentioned in a message dated July 22, 2023, which reads: "At Gate 11, the gate number on the VDGS reads Gate 9 instead of 11..." Imagine my disappointment to discover this error dating back almost two years and still unresolved. I beg you to fix this once and for all. It's a very small airport with a relatively high price tag compared to other, much larger, hand-built airports. And fixing the error of changing the number 9 to 11 in the aforementioned parking lot doesn't seem like a very complicated task.    I look forward to hearing from you.   NOTE: I have purchased the airport and am using it in MSFS 2024.

is reshade available to use in xplane 12 beta?  

# Public Beta 12.2.0-b4   ## Aircraft + Cirrus SR22: Removed the second “S” indicator on the ball compass (XPD-16827).   ## ATC + Improved ATC course corrections during the early stages of an approach. These now use track rather than heading and trigger at 10 degrees instead of 5. They are disabled for procedure approaches. + Fixed an issue where the pushback buttons on the Ground Handling Window were not working anymore when pushback wasn’t requested via the ATC system (XPD-16816).   ## General + Opening the IOS Windows will no longer reset the payload and fuel of the aircraft. + Fixed an issue when loading a customer aircraft (XPD-16767). + Enabled static aircraft on external visuals for airports loaded during a flight, such as the arrival to a new airport. + The airport location list will support filtering by local ID from now on (XPD-16830). + Improved the general logging. The new log rotation system is now disabled for Plane Maker and Airfoil Maker. Older log files are moved from the X-Plane root folder to a new folder called “Output/Log Archive”. Log file names will include the date/timestamp in the filename based on the last modified date/time. + Improved the error handling in our replay system.   ## Graphics Core Engine + Fixed an incremental host memory leak with NVIDIA GPUs in system without ReBar. + Fixed an issue in the texture pager when using orthographic textures.   ## Graphics + Increased the resolution of the cloud noise cubes to increase the appearance of clouds from extreme altitudes (XPD-16818). + Recalibrated the navigation and position lights of aircraft to be more realistic and less orange at night.   ## Scenery + Jetways now properly sit on the ground without sunken wheels (XPD-16741).   ## Systems + Enhanced logging for GPS runtime errors. + Added three new datarefs to override control axis to be treated as force-feedback. This will allow users of high-end yokes to use those without the need to disable trim in the acf file. <@&1146075852925313077>