mm2202 1 Posted September 10, 2020 Share Posted September 10, 2020 Hans, there seem to be two different navigraphOIDC.dll although both have same version number 1.0.0.0. and the the same size. In P3Dv5 I found the DLL with last change date 08.05.2020. The one you have provided in this thread does have last change date 29.06.2020. Replacing the DLL with the DLL from 29.06.2020 did it and everything is fine again. Switching back and CRJ is frozen. Cheers, Michael Link to comment Share on other sites More sharing options...
Dreamflight767 5 Posted September 18, 2020 Share Posted September 18, 2020 I have been having similar issues. I did a complete uninstall of the CRJ Pro and fresh install first time it happened. Loaded airplane and no problems. Here I am about 2 weeks later, I go to fly the airplane and same thing happens. CRJ Pro latest build include HF/experimental builds. Engines running but screens are dark, throttle is firewalled, yoke hanging to left. I am using Navigraph. Most recent version of P3D and HF. Windows 10 64 ver. 1909. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3695 Posted September 19, 2020 Author Developer Share Posted September 19, 2020 This looks very much like the NavigraphOIDC.dll issue discussed earlier in this thread. Link to comment Share on other sites More sharing options...
Dreamflight767 5 Posted September 19, 2020 Share Posted September 19, 2020 13 hours ago, Hans Hartmann said: This looks very much like the NavigraphOIDC.dll issue discussed earlier in this thread. Here is a pic of my main P3D folder. Not sure what steps I need to take. Knock on wood, the CRJ is the only airplane giving me trouble. Please login to display this image. Link to comment Share on other sites More sharing options...
michael-t 4 Posted September 27, 2020 Share Posted September 27, 2020 On my system, the 08-May-2020 NavigraphOIDC.dll which causes the CRJ problem stems from the Leonardo MD-82. Each time when I run the Leonardo Load Manager, it overwrites the NavigraphOIDC.dll in the P3D main directory. I keep a copy of the correct NavigraphOIDC.dll that is installed by the CRJ so I can restore it. Michael Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3695 Posted September 27, 2020 Author Developer Share Posted September 27, 2020 Leonardo, Navigraph and myself are still in contact about this. Something indeed went wrong, but it's too early to say what exactly. I'll let you know as soon as I know more. Link to comment Share on other sites More sharing options...
Dreamflight767 5 Posted October 2, 2020 Share Posted October 2, 2020 On 9/27/2020 at 11:44 AM, Hans Hartmann said: Leonardo, Navigraph and myself are still in contact about this. Something indeed went wrong, but it's too early to say what exactly. I'll let you know as soon as I know more. Just FYI, I do not have issues with the MD-80. On 9/27/2020 at 2:18 AM, michael-t said: On my system, the 08-May-2020 NavigraphOIDC.dll which causes the CRJ problem stems from the Leonardo MD-82. Each time when I run the Leonardo Load Manager, it overwrites the NavigraphOIDC.dll in the P3D main directory. I keep a copy of the correct NavigraphOIDC.dll that is installed by the CRJ so I can restore it. Michael Does using this "correct" copy effect the MD-82 or other airplanes/add-ons/P3D? Link to comment Share on other sites More sharing options...
michael-t 4 Posted October 3, 2020 Share Posted October 3, 2020 On 2.10.2020 at 06:35, Dreamflight767 sagte: Just FYI, I do not have issues with the MD-80. Do you use the Leonardo Load Manager? On 2.10.2020 at 06:35, Dreamflight767 sagte: Does using this "correct" copy effect the MD-82 or other airplanes/add-ons/P3D? No Michael Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3695 Posted October 3, 2020 Author Developer Share Posted October 3, 2020 Leonardo and us received a new version of the NavigraphOIDC.dll yesterday which was tested and confirmed to work with both aircraft now (no more "aircraft A kills aircraft B and vice versa). I will provide an experimental update 2.2.0.2 in a few minutes which installs this DLL. Link to comment Share on other sites More sharing options...
Dave Gray 12 Posted October 5, 2020 Share Posted October 5, 2020 thanks hans. ran the update. i have my screens back Link to comment Share on other sites More sharing options...
Dreamflight767 5 Posted October 7, 2020 Share Posted October 7, 2020 Thanks. Link to comment Share on other sites More sharing options...
bhorv67 12 Posted October 11, 2020 Share Posted October 11, 2020 I can report that I do indeed have 2.2.0.2 CRJ installed and I'll get this dark aircraft after one or 2 normal flights. I'm guessing the OIDC.dll contained in this post is older, yet the 2.2.0.2 update did not fix this for me. My remedy is to completely uninstall/reinstall the CRJ, which then it works for only a few flights, then reverts back to a dead aircraft, to which again, I have to uninstall/reinstall. Link to comment Share on other sites More sharing options...
Dave Gray 12 Posted October 12, 2020 Share Posted October 12, 2020 yeah. just launched the sim and it's back to the old behavior. Fix only worked a couple of spawns Link to comment Share on other sites More sharing options...
bhorv67 12 Posted October 13, 2020 Share Posted October 13, 2020 As an experiment, I just did a reinstall of the CRJ. I made of copy of the OIDC.dll from the updater (3.0.0.0) and will check before each launch if the version is being overwritten by something. Will report back any findings. Link to comment Share on other sites More sharing options...
Dreamflight767 5 Posted October 13, 2020 Share Posted October 13, 2020 I updated my most recent Navigraph and got the black out screen again. Link to comment Share on other sites More sharing options...
Dave Gray 12 Posted October 14, 2020 Share Posted October 14, 2020 good point. I had also updated my navigraph like I do every time a new cycle comes out Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3695 Posted October 14, 2020 Author Developer Share Posted October 14, 2020 23 hours ago, Dreamflight767 said: I updated my most recent Navigraph and got the black out screen again. I just did the same (FMS Manager and 2011 data). No problem at. I don't know what causes the problem, but it's not the FMS data update. Please try to copy the DLL into the P3D main folder again. Link to comment Share on other sites More sharing options...
Dave Gray 12 Posted October 15, 2020 Share Posted October 15, 2020 18 hours ago, Hans Hartmann said: I just did the same (FMS Manager and 2011 data). No problem at. I don't know what causes the problem, but it's not the FMS data update. Please try to copy the DLL into the P3D main folder again. Hey Hans. Confirming putting the DLL file back restored the aircraft to normal. Thanks. Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3695 Posted October 15, 2020 Author Developer Share Posted October 15, 2020 Just now, Dave Gray said: Hey Hans. Confirming putting the DLL file back restored the aircraft to normal. Thanks. OK. It's good that at least that works. Unfortunately, you will have to keep doing this until all aircraft developers use this new DLL version and it's the same for every product. Navigraph has been working on unifying this for all developers as well. Link to comment Share on other sites More sharing options...
JH464 0 Posted October 15, 2020 Share Posted October 15, 2020 Hi there, I also have the frozen problem. I put the new dll that Hans put on this forum in the main P3D folder ( i have v 4.4.16 installed). CRJ old version worked tip top. Any updates on how to fix. Thanks Jasper Link to comment Share on other sites More sharing options...
bhorv67 12 Posted October 24, 2020 Share Posted October 24, 2020 I'm finding that launching the Leonardo Maddog Load Manager will overwrite this .dll back to version 1.0. I can confirm I have the latest working build of the MD82 (b725) and yet each time the load manager is launched it's reverting the .dll. For now until this is sorted, I'm keeping the correct .dll handy where I can replace as necessary. Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3695 Posted October 24, 2020 Author Developer Share Posted October 24, 2020 Leonardo is aware of that. It will be fixed with their next update. Link to comment Share on other sites More sharing options...
ΙΩΑΝΝΗΣ ΚΑΡΡΑΣ 0 Posted October 10, 2021 Share Posted October 10, 2021 On 12/7/2020 at 3:21 ΜΜ, Hans Hartmann said: Το πρόβλημα με το κατεψυγμένο CRJ (μαύρες οθόνες, ο ζυγός εκτράπηκε πλήρως αριστερά) φαίνεται να έχει λυθεί για τους περισσότερους ανθρώπους προσθέτοντας το navigraphOIDC.dll στον κύριο φάκελο P3D: navigraphOIDC.7z Ωστόσο, ποιος εξακολουθεί να έχει το πρόβλημα. Παρακαλώ δημοσιεύστε εδώ αν το κάνετε (και παρακαλώ μόνο τότε!), Για να προσπαθήσουμε να καταλάβουμε πώς να το κάνουμε να λειτουργήσει και για εσάς. Hello gentlemen. I put navigrapf OIDC.dll in the P3D folder and the problem is a problem. All black. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.