samwise7 37 Posted February 18, 2019 Share Posted February 18, 2019 It appears the fonts are cutoff on the right side of the Navaid page in the DATA category. Please login to display this image. I'm assuming that's a cutoff zero and not an epsilon character? Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted February 19, 2019 Aerosoft Share Posted February 19, 2019 What version of the bus is that? What is your screen resolution? Link to comment Share on other sites More sharing options...
samwise7 37 Posted February 19, 2019 Author Share Posted February 19, 2019 That one in particular is A320-CFM, Screen and sim resolution are both 1920x1080 Installed version is 1.2.3.1. Edit.... I also tried to alternate the 16x9 panel cfgs (fullscreen and windowed), and the same on the IAE variants. results were all the same. Thanks Here are the airbus fonts installed just in case you can see if any are missing Please login to display this image. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted February 20, 2019 Aerosoft Share Posted February 20, 2019 And the OS? if it is win7 it could be linked to the fact font scaling was rather messed up there. Link to comment Share on other sites More sharing options...
samwise7 37 Posted February 20, 2019 Author Share Posted February 20, 2019 3 hours ago, Mathijs Kok said: And the OS? if it is win7 it could be linked to the fact font scaling was rather messed up there. Negative sir, I'm running Win10. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted February 20, 2019 Deputy Sheriffs Share Posted February 20, 2019 Do you see this only in this specific case or in other screens of the MCDU too? Link to comment Share on other sites More sharing options...
samwise7 37 Posted February 20, 2019 Author Share Posted February 20, 2019 14 minutes ago, mopperle said: Do you see this only in this specific case or in other screens of the MCDU too? I only noticed it on this page and even then, only where duplicate navaids with the same ID exist. See below Please login to display this image. Please login to display this image. I was doing a flight on the PilotEdge(r) network when I was given a direct to clearance to a vor that I did not have in my flightplan Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted February 20, 2019 Aerosoft Share Posted February 20, 2019 Okay I will ask the dev of that part to have a look. I am personally unable to recreate this. Link to comment Share on other sites More sharing options...
samwise7 37 Posted February 20, 2019 Author Share Posted February 20, 2019 18 minutes ago, Mathijs Kok said: Okay I will ask the dev of that part to have a look. I am personally unable to recreate this. Sure, no problem. Thanks for having it looked into. Link to comment Share on other sites More sharing options...
brtkstn 14 Posted February 23, 2019 Share Posted February 23, 2019 Hi, mine looks like this: Please login to display this image. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted February 23, 2019 Aerosoft Share Posted February 23, 2019 We are also unable to recreate this. But clearly it IS an issue for this user and we like to understand what causes it. Link to comment Share on other sites More sharing options...
Deputy Sheriffs Herman 1591 Posted February 24, 2019 Deputy Sheriffs Share Posted February 24, 2019 First posted in the 3rd MCDU page. I move this for you to the captain and FO MCDU support page. Link to comment Share on other sites More sharing options...
ozgulkagan 18 Posted February 24, 2019 Share Posted February 24, 2019 Maybe windows zoom factor has anything to do? There is a zoom option %125, %150 etc in display properties. Is it %100 for you? @samwise7 Link to comment Share on other sites More sharing options...
samwise7 37 Posted February 24, 2019 Author Share Posted February 24, 2019 29 minutes ago, ozgulkagan said: Maybe windows zoom factor has anything to do? There is a zoom option %125, %150 etc in display properties. Is it %100 for you? @samwise7 Hi, thanks for the suggestion, as you can see, I don't scale any of my displays. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted February 25, 2019 Aerosoft Share Posted February 25, 2019 We have seen this a few times in the last 7 years, but looking back at each of them I do not see any reason why the sim should misinterpret the font size. For now this beats me. Link to comment Share on other sites More sharing options...
samwise7 37 Posted February 26, 2019 Author Share Posted February 26, 2019 Mr. Kok, I appreciate your attention to this but its really a minor issue, just a little pesky anomaly. The lat-lon data is there and I use those to identify the proper way-points so all is good. I'm sure your guys have more pressing issues to look into. No worries here. Thanks. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted February 27, 2019 Aerosoft Share Posted February 27, 2019 Well, it must have the same cause as this, so it needs to be check out. Please login to display this image. Link to comment Share on other sites More sharing options...
CFG874 14 Posted February 27, 2019 Share Posted February 27, 2019 Hello,In the MCDU -> F-PLN the background WP shows the UTC / FL in large numbers.FROM UTC SPD / ALTYZV 1232 / FL359With FL359 I already see that at 9 something is missing.The other WPs are in front of us, the numbers are a bit smaller.If I represent the MCDU extra and make it wider or narrower, I see either all or only 3 digits (LOZ as in the example).This has nothing to do with Windows, but if the window changes, the font must change in the same proportion.That works in the other level in length.Please check this please.Greeting CFG874 Bernd Hallo, In der MCDU --> F-PLN wird der hinter liegende WP die UTC / FL in grossen Zahlen dargestellt. FROM UTC SPD/ALT YZV 1232 / FL359 Bei FL359 sehe ich schon das bei der 9 etwas fehlt. Bei den anderen WP die vor uns liegen sind die Zahlen etwas kleiner. Wenn ich die MCDU extra darstelle und breiter oder schmaler mache, sehe ich entweder alles oder nur noch 3 Stellen (LOZ wie im Beispiel ). Das hat aber nichts mit Windows zu tun, sondern wenn das Fenster sich verändert muß sich die Schrift im gleichen Verhältnis verändern. In der anderen Ebene in der Länge funktioniert das doch auch. Bitte überprüfen sie dies Bitte. Gruß CFG874 Bernd Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted February 27, 2019 Share Posted February 27, 2019 On 2/24/2019 at 8:18 AM, samwise7 said: Hi, thanks for the suggestion, as you can see, I don't scale any of my displays. Please login to display this image. Please login to display this image. Please try changing your scaling option to Aspect Ratio and see if that makes a difference for you. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted February 27, 2019 Deputy Sheriffs Share Posted February 27, 2019 @CFG874 a screenshot would be nice Link to comment Share on other sites More sharing options...
samwise7 37 Posted February 27, 2019 Author Share Posted February 27, 2019 41 minutes ago, DaveCT2003 said: Please try changing your scaling option to Aspect Ratio and see if that makes a difference for you. Hello, I tried your suggestion. Letting the display control the scaling, letting the GPU control the scaling and requesting the driver scaling to over ride game setting. All with the same results. However, what it did do was to set all color settings back to default so I'll have to re-calibrate all 3 of my monitors again. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
CFG874 14 Posted February 28, 2019 Share Posted February 28, 2019 On 27.2.2019 at 17:27, mopperle sagte: @CFG874 a screenshot would be nice Hello mopperle,Once the MCDU fixed in the Airbus, where with zoom or without plays no role.Then 2 * MCDU window solved and widened. The change in height does not matter.CFG874 Bernd Hallo mopperle, Einmal die MCDU fest im Airbus, wobei mit Zoom oder ohne spielt keine Rolle. Dann 2* MCDU Fenster gelöst und breiter gemacht. Die Veränderung der Höhe spielt dabei keine Rolle. CFG874 Bernd Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
samwise7 37 Posted February 28, 2019 Author Share Posted February 28, 2019 I can collaborate with @CFG874, resizing the popup window does indeed reveal the remainder of the frequencies on the right, however, the VC still shows the truncated frequencies. Please login to display this image. Link to comment Share on other sites More sharing options...
samwise7 37 Posted March 4, 2019 Author Share Posted March 4, 2019 On 2/25/2019 at 2:18 PM, Mathijs Kok said: We have seen this a few times in the last 7 years, but looking back at each of them I do not see any reason why the sim should misinterpret the font size. For now this beats me. Fixed in 1.2.3.2. Thank you. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted March 5, 2019 Aerosoft Share Posted March 5, 2019 Because we believe this topic has been answered we have closed it. If you have any more questions feel free to open a new topic. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.