samwise7 37 Posted November 19, 2018 Share Posted November 19, 2018 I noticed today on my first try with the IAE A-320 latest build 1.2.1.5, during the flight control check at full aileron deflection, only the outermost surfaces displayed green arrows. Until this build if you moved the control stick all surfaces on that side of the wing would stand up (including the spoilers) and the green arrows would all be displayed on the ecam. Everything seemed to work well, and even this had no adverse effect on the flight at all, but I'm wondering if I need to re-install the update, or if this is correct and by design? Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted November 20, 2018 Aerosoft Share Posted November 20, 2018 We have not touched that bit of code for years. Almost certainly that indicates your controller does not have full travel. I suggest to recalibrate it. Please login to display this image. Link to comment Share on other sites More sharing options...
samwise7 37 Posted November 20, 2018 Author Share Posted November 20, 2018 I'll try your suggestion. Thank you Mr. Kok Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted November 20, 2018 Share Posted November 20, 2018 24 minutes ago, samwise7 said: I'll try your suggestion. Thank you Mr. Kok By the way... love the username you selected! Very cool! Link to comment Share on other sites More sharing options...
Fragged^2 40 Posted November 20, 2018 Share Posted November 20, 2018 Warthog HOTAS calibrated in both Windows and P3D: Please login to display this image. Full left deflection and ECAM shows: Please login to display this image. Default Delta A321, Aerobus version 1.2.1.5. Link to comment Share on other sites More sharing options...
ozgulkagan 18 Posted November 20, 2018 Share Posted November 20, 2018 I got the sam.e I think there's a problem here. No change in stick setting. Was working normal. Now it shows only the outermost arrow. A320 CFM Link to comment Share on other sites More sharing options...
samwise7 37 Posted November 20, 2018 Author Share Posted November 20, 2018 7 hours ago, Mathijs Kok said: Almost certainly that indicates your controller does not have full travel. I suggest to recalibrate it. Same results after re-calibration sir, on both IAE and CFM models, as soon as the AC is airborne full ECAM indications return. Not an earth shattering issue by any means. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted November 21, 2018 Aerosoft Share Posted November 21, 2018 Well, it is problematic for sure it indicates that the aircraft does not read the full scale of the joystick movement. The image also shows the small cross not fully right so that should match. Can you show the calibration screen? Link to comment Share on other sites More sharing options...
MikaV 28 Posted November 21, 2018 Share Posted November 21, 2018 Same thing here. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted November 22, 2018 Deputy Sheriffs Share Posted November 22, 2018 Bug confirmed and will be solved. Link to comment Share on other sites More sharing options...
samwise7 37 Posted November 22, 2018 Author Share Posted November 22, 2018 4 hours ago, mopperle said: Bug confirmed and will be solved. Fantastic!, I'm sure you and your team will have it working in no time. Just one other thing I noticed, the caution for TCAS when inactive shows twice, once in amber and once in green. Thanks, Jose Link to comment Share on other sites More sharing options...
Fragged^2 40 Posted November 22, 2018 Share Posted November 22, 2018 20 hours ago, Mathijs Kok said: Well, it is problematic for sure it indicates that the aircraft does not read the full scale of the joystick movement. The image also shows the small cross not fully right so that should match. Can you show the calibration screen? Late reply, the bug has been found.. The cross on the Windows screen won't go all the way to the side by design. I guess I forgot to take a screenshot of the P3D Controller Calibration screen where it shows full values for X and Y from 0 to 16384 (14 bit sensor). Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted November 22, 2018 Aerosoft Share Posted November 22, 2018 Mmmm on my calibration screen the crosse touches the sides. But as said we found a possible cause. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.