gkvarga 2 Posted April 2, 2014 Share Posted April 2, 2014 Can someone please explain how to change the default pan rate to the typical pan rate in FSX. The slow pan rate really annoys me. Also how to change the default 40% zoom. My view is in wide angle, I'm sure as most, so 40% is quite annoying as well. Thanks for your help Link to comment Share on other sites More sharing options...
Emi 5161 Posted April 2, 2014 Share Posted April 2, 2014 I'm not exactly sure what you want to do. Do you mean the rate with which you can look around in the cockpit? This would be controlled by FSX itself and has nothing to do with our Airbus since it is the same in all aircraft. I would suggest getting a camera addon for this. Link to comment Share on other sites More sharing options...
KyleD 1027 Posted April 4, 2014 Share Posted April 4, 2014 Can someone please explain how to change the default pan rate to the typical pan rate in FSX. The slow pan rate really annoys me. Also how to change the default 40% zoom. My view is in wide angle, I'm sure as most, so 40% is quite annoying as well. Thanks for your help Ah, what you need to do is actually switch to the Virtual Cockpit. It does not start at the VC unless you disable the View System. When you cycle through views using "S" and "A", you will not be brought to the VC. Just press "Shift+A" once and you'll go to the VC. The default view there has a slower pan rate then the traditional VC view. Link to comment Share on other sites More sharing options...
gkvarga 2 Posted April 23, 2014 Author Share Posted April 23, 2014 Thank you Kyle, this is the information I was looking for. Much appreciated. Link to comment Share on other sites More sharing options...
kevinh 6 Posted May 23, 2014 Share Posted May 23, 2014 I like the view system but don't like the slower pan rate. I like to use pan when taxiing, and this rate is too slow for that. Most other times I use SPACEBAR+mouse so it's not an issue then of course. Is there a reason this pan rate was chosen? It seems a bit odd to have such a slow pan rate but normal tilt rate. Can you switch in and out of the view system easily? Kevin Link to comment Share on other sites More sharing options...
Emi 5161 Posted May 26, 2014 Share Posted May 26, 2014 As said Kevin, we did not implement this panrate, but Microsoft did. You would have to ask the MS support about this, but most likely they won't be able to answer it either anymore. Link to comment Share on other sites More sharing options...
Smegtastic 45 Posted June 25, 2014 Share Posted June 25, 2014 Hi, I came across this while looking for a similar solution: http://fsxtimes.wordpress.com/2011/02/16/adjust-virtual-cockpit-panrate/ I don't know if this helps you but I hope so.. Kind regards Dave W Link to comment Share on other sites More sharing options...
acra24 83 Posted June 25, 2014 Share Posted June 25, 2014 Dave W That's an excellent tip. Good find. Thanks Andrew Link to comment Share on other sites More sharing options...
kevinh 6 Posted October 2, 2014 Share Posted October 2, 2014 As said Kevin, we did not implement this panrate, but Microsoft did. You would have to ask the MS support about this, but most likely they won't be able to answer it either anymore. You missed the point. The hat switch pan rate in your view system is much slower than default behaviour. The same is true with the new A318/319. Something in your views system is slowing the pan rate down. If I switch views OFF and use the VC there is no problem with panning using the hat switch. I also reported that the initial zoom is too wide, but that hasn't been answered. If I have views OFF the default zoom is as set in cameras.cfg (0.7 in my case). Is there anyway to change the default zoom in views mode from 0.4? I know you can change it with +/- keys or the mouse scroll wheel but it reverts to 0.4 every time you load a flight. Link to comment Share on other sites More sharing options...
ScottecLEMD 14 Posted October 20, 2014 Share Posted October 20, 2014 I think it is something that can be tweaked per aircraft as in my PMDG 737NGX the pan rate is much faster. I was under the impressions this was a setting in the Cameras section of the aircraft,cfg. If I get time I will compare the PMDG VC view with the Aerosoft VC view and see what the differences are. Ken Ken Link to comment Share on other sites More sharing options...
ScottecLEMD 14 Posted October 21, 2014 Share Posted October 21, 2014 This is the only difference I found between PMDG and Aerosoft, and kind of makes sense although I have not made this change in the Aerosoft product yet. In the PMDG aircraft.cfg file under Virtual Cockpit I have this additional line: xyzAccelleratorTime=2.0 I guess by altering the time you can speed up or slow down the pan rate in any window? If I get time later on tonight I will try this and let you know what happens. Ken Link to comment Share on other sites More sharing options...
rsvette12 53 Posted October 21, 2014 Share Posted October 21, 2014 Panning slow factory settings drive me crazy this is all you have to do shown below - make both 100 in your cameras file - has nothing to do with aircraft - its the sim itself fsx or P3D - this work great * Locate Cameras.cfg under C:\Users\<user name>\AppData\Roaming\Microsoft\FSX directory * Under CameraDefinition.002 (Virtual Cockpit) section * Modify the number (degrees per second) of the following two: PitchPanRate=15 // vertical pan rate — I use 100 HeadingPanRate=45 // horizontal pan rate — I use 100 Link to comment Share on other sites More sharing options...
ScottecLEMD 14 Posted October 21, 2014 Share Posted October 21, 2014 Changing the setting per rsvette12 had no effect on my sim. Still going to try the PMDG option in the relevant aircraft.cfg file. Link to comment Share on other sites More sharing options...
brooker2 0 Posted October 30, 2014 Share Posted October 30, 2014 I have the Aerosoft Airbus A318/A319 and Aerosoft Airbus X Extended. They are both superb, but I do find the pan rate in the "CP and FO MAIN PANEL" very slow. I read rsvette12's post #12 above, but instead I tried altering the HeadingPanRate settings in each individual aircraft.cfg for: [CameraDefinition.007] Title = "CP MAIN PANEL" and [CAMERADEFINITION.008] Title= "FO MAIN PANEL" to HeadingPanRate= 60 (default is 10) This results in an acceptable pan rate in both the above views. For me! YMMV. Paul Link to comment Share on other sites More sharing options...
Andyphone 11 Posted October 31, 2014 Share Posted October 31, 2014 Great Paul, going to try that later. I didn't use the view system with the Airbus X but started using it again with the new A318/319 and the slow horizontal tilt is really annoying especially when taxing. I see the problem was reported in other topics but guess not widely enough to be addressed by the developers. Thanks Link to comment Share on other sites More sharing options...
rsvette12 53 Posted October 31, 2014 Share Posted October 31, 2014 I have the Aerosoft Airbus A318/A319 and Aerosoft Airbus X Extended. They are both superb, but I do find the pan rate in the "CP and FO MAIN PANEL" very slow. I read rsvette12's post #12 above, but instead I tried altering the HeadingPanRate settings in each individual aircraft.cfg for: [CameraDefinition.007] Title = "CP MAIN PANEL" and [CAMERADEFINITION.008] Title= "FO MAIN PANEL" to HeadingPanRate= 60 (default is 10) This results in an acceptable pan rate in both the above views. For me! YMMV. Paul I have never had a problem doing it as I stated works perfectly - but going to try your method Paul - thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.