Blue 0 Posted October 13, 2013 Share Posted October 13, 2013 Hi,For me your last update file works perfectly no more a -floor issue...Thanks,ChristianEnvoyé depuis mon HTC Desire HD A9191 avec Tapatalk Link to comment Share on other sites More sharing options...
Vasilis Sevastopoulos 34 Posted October 13, 2013 Share Posted October 13, 2013 With your second .dll there is no CTD and fatal error the Aircraft loads normally... But there is no A.floor or any other protection at all. :-) Airbus flying like "Boeing" there is no Airbus. :-) Link to comment Share on other sites More sharing options...
nakis03 3 Posted October 13, 2013 Author Share Posted October 13, 2013 with second dll alpha floor fixed...but all protections Are gone ... Therei is no laws ...normal ..alternate ..direct... John Drassos FO Sent from my iPad using Tapatalk - now Free Link to comment Share on other sites More sharing options...
SLKVP 18 Posted October 13, 2013 Share Posted October 13, 2013 I Confirm that I have the issue with V1.15 HF018c. TOM 70.350, FUEL: 13.400 MAC:25% FLAPS: 1+F TRIM UP 0.8 V1: 152 - VR: 153 - V2: 154 F=153 S=197 O=213 -- FLEX:57*C ZFW %MAC confirmed in fuel planner I will try recommended fixes and I will report back. EDIT: I recorded a takeoff with fraps. To my understanding, is not TOGALK the problem but the fact that as soon as the airplane is airborne, is flying bellow stall speed for the current configuration, thus A.FLOOR and TOGALK kick-in. I repaired Visual C++ 2008 Redist after downloading from the provided link and confirmed FSX SP2. no DLL has been replaced as yet. Link to comment Share on other sites More sharing options...
Galskiman 1 Posted October 13, 2013 Share Posted October 13, 2013 Today I got the same iusse. Never had problems before with that, but first time I used more then 13 tons of fuel with the Patch 1.15 . At the MCDUFPLNCSTRData.txt is this error : DEBUG,Error: No V2 SPD Output,0 And the FS2Crew stucked at the "Initial Climb" phase after "Gear up" command and never changed to the after take off checklist.Never had problems with FS2Crew before and using the actual version for AAXE v1.15). I don't know what event triggers the after take off checklist at FS2Crew but it seems that the Airbus does not go through this event. Sensitized by this thread I checked , flaps setting, CG, etc, but I got the same 15kts at the MCDU at the first waypoint and also AFLOOR and TOGALOCK. So I can confirm that under some circumstances there seems to be a problem with AFLOOR. cheers Galskiman Link to comment Share on other sites More sharing options...
Joshua Che. 1601 Posted October 14, 2013 Share Posted October 14, 2013 Please try this. AirbusXE.zip Link to comment Share on other sites More sharing options...
nakis03 3 Posted October 14, 2013 Author Share Posted October 14, 2013 Please try this. Dear Joshua There are no protections on take off ...no vls.no aprot ..no amax ..no..alphAfloor ...no togalock ...the aircraft maintain in Direct low with lost all protections except voice warnings like stall..stall.. probably is the 4th law something between alternate and direct... im kidding anyway for any other help let me know Regards john Drassos FO A320 (GR002470) Link to comment Share on other sites More sharing options...
Joshua Che. 1601 Posted October 14, 2013 Share Posted October 14, 2013 Dear Joshua There are no protections on take off ...no vls.no aprot ..no amax ..no..alphAfloor ...no togalock ...the aircraft maintain in Direct low with lost all protections except voice warnings like stall..stall.. probably is the 4th law something between alternate and direct... im kidding anyway for any other help let me know Regards john Drassos FO A320 (GR002470) Screenshot what you saw please. Link to comment Share on other sites More sharing options...
nakis03 3 Posted October 14, 2013 Author Share Posted October 14, 2013 Link to comment Share on other sites More sharing options...
Joshua Che. 1601 Posted October 14, 2013 Share Posted October 14, 2013 Ok, Retry again with this. If you get the same, attach the MCDUFPLNCSTRData.txt before you exit FSX. The file should not be blank this time. AirbusXE.zip Link to comment Share on other sites More sharing options...
Vasilis Sevastopoulos 34 Posted October 14, 2013 Share Posted October 14, 2013 Once again there is no protection at all. MCDUFPLNCSTRData.txt Link to comment Share on other sites More sharing options...
nakis03 3 Posted October 14, 2013 Author Share Posted October 14, 2013 is blank unfortunately Link to comment Share on other sites More sharing options...
Galskiman 1 Posted October 14, 2013 Share Posted October 14, 2013 And now I get a C Run-Time Error R6031 (http://msdn.microsoft.com/en-us/library/ms173740.aspx) when I go to "End Flight" at the FSX Menu after the AFLOOR appears. But I didn't change anything until now, I have the original v 1.15 + Hotfix 18c installation. My Microsoft Visual C++ 2008 Redistributable Package (x64) is not broken and my other addons like NGX and 777LR working fine without any problems. cheers Galskiman PS: I tried a flight EDDM-EDDF with 6tons FOB, no AFLOOR, normal behaviour, everything works fine.... so there must something wrong with fuel or weight calculations ? Link to comment Share on other sites More sharing options...
Joshua Che. 1601 Posted October 14, 2013 Share Posted October 14, 2013 Please retry with this. Note that this file is for testing VLS only, not for normal operations. AirbusXE4.zip Link to comment Share on other sites More sharing options...
nakis03 3 Posted October 14, 2013 Author Share Posted October 14, 2013 MCDUFPLNCSTRData.txt Link to comment Share on other sites More sharing options...
Joshua Che. 1601 Posted October 14, 2013 Share Posted October 14, 2013 MCDUFPLNCSTRData.txt Anyone else can confirm the same results? Link to comment Share on other sites More sharing options...
Galskiman 1 Posted October 14, 2013 Share Posted October 14, 2013 No, I am not able to load the Airbus. I get a FSX fatal error and FSX restarts when I select the Airbus at the main menu. This occured with latest dll from AirbusXE4.zip. cheers Galskiman Link to comment Share on other sites More sharing options...
Joshua Che. 1601 Posted October 14, 2013 Share Posted October 14, 2013 No, I am not able to load the Airbus. I get a FSX fatal error and FSX restarts when I select the Airbus at the main menu. This occured with latest dll from AirbusXE4.zip. cheers Galskiman Please perform the steps in my post above to get the error message from the event log Link to comment Share on other sites More sharing options...
Galskiman 1 Posted October 14, 2013 Share Posted October 14, 2013 Ok, I hope this is what you are asking for : Log Name: Application Source: Application Error Date: 14.10.2013 15:58:52 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: Arne-PC Description: Faulting application name: fsx.exe, version: 10.0.61637.0, time stamp: 0x46fadb14 Faulting module name: AirbusXE.DLL, version: 1.0.0.1, time stamp: 0x525be652 Exception code: 0xc0000005 Fault offset: 0x00051c31 Faulting process id: 0x1724 Faulting application start time: 0x01cec8e5528a46e4 Faulting application path: D:\FSX\fsx.exe Faulting module path: D:\FSX\SimObjects\Airplanes\Aerosoft Airbus X Extended Base\Panel_Fallback\AirbusXE.DLL Report Id: c167003e-34d8-11e3-bce9-c860008b6c39 Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2013-10-14T13:58:52.000000000Z" /> <EventRecordID>34342</EventRecordID> <Channel>Application</Channel> <Computer>Arne-PC</Computer> <Security /> </System> <EventData> <Data>fsx.exe</Data> <Data>10.0.61637.0</Data> <Data>46fadb14</Data> <Data>AirbusXE.DLL</Data> <Data>1.0.0.1</Data> <Data>525be652</Data> <Data>c0000005</Data> <Data>00051c31</Data> <Data>1724</Data> <Data>01cec8e5528a46e4</Data> <Data>D:\FSX\fsx.exe</Data> <Data>D:\FSX\SimObjects\Airplanes\Aerosoft Airbus X Extended Base\Panel_Fallback\AirbusXE.DLL</Data> <Data>c167003e-34d8-11e3-bce9-c860008b6c39</Data> </EventData> </Event> Link to comment Share on other sites More sharing options...
Joshua Che. 1601 Posted October 14, 2013 Share Posted October 14, 2013 Try both of them, see which works:AirbusXE5.zip AirbusXE5R.zip Link to comment Share on other sites More sharing options...
nakis03 3 Posted October 14, 2013 Author Share Posted October 14, 2013 MCDUFPLNCSTRData.txt Link to comment Share on other sites More sharing options...
Vasilis Sevastopoulos 34 Posted October 14, 2013 Share Posted October 14, 2013 Both of them give me back a fatal error FSX CTD... Faulting application name: fsx.exe, version: 10.0.61637.0, time stamp: 0x46fadb14 Faulting module name: MSVCP90.dll, version: 9.0.30729.6161, time stamp: 0x4dace5bd Exception code: 0xc0000005 Fault offset: 0x000058ba Faulting process id: 0xe0c Faulting application start time: 0x01cec904af9f5ee0 Faulting application path: E:\Microsoft Flight Simulator X\fsx.exe Faulting module path: C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57\MSVCP90.dll Report Id: 90c0ddcf-34f8-11e3-843f-1c6f65c08a9c --------------------------------------------------------- fsx.exe 10.0.61637.0 46fadb14 MSVCP90.dll 9.0.30729.6161 4dace5bd c0000005 000058ba e0c 01cec904af9f5ee0 E:\Microsoft Flight Simulator X\fsx.exe C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57\MSVCP90.dll 90c0ddcf-34f8-11e3-843f-1c6f65c08a9c Link to comment Share on other sites More sharing options...
Galskiman 1 Posted October 14, 2013 Share Posted October 14, 2013 yeap also both give me fatal error and restarts FSX PS: I tested something around with the original dll. I can take off in EDDF with 12.4 tons FOB without AFLOOR. At LGAV with 12.4 tons FOB I get AFLOOR (same PAX ,cargo load, same Flaps config and CG trim from the fuelplanner), I really don't understand that. Link to comment Share on other sites More sharing options...
Patrick1246 353 Posted October 14, 2013 Share Posted October 14, 2013 strange, I have tested both dll's without problems, I'm sure Joshua can fix the issue for all Customer Link to comment Share on other sites More sharing options...
Joshua Che. 1601 Posted October 15, 2013 Share Posted October 15, 2013 Ok, Please verify that you are not running FSX in compatibility mode and you have full admin access. Retry with both. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.