MatzeH84 88 Posted March 16, 2021 Share Posted March 16, 2021 I have all addons configured via FSUIPC, so I don't have to bother switching profiles.. However the throttle axis is not recognized by the CRJ neither as direct axis through FSUIPC nor by the option send to FS as normal axis. Only if I set up the axis directly in the sim it works. Plus, many other hardware inputs won't work, especially on the AP panel, which is a real pain when you have all the hardware and cannot use it properly. Any advice on the throttle? Any planned development on extended hardware support? Best Matthias Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted March 16, 2021 Aerosoft Share Posted March 16, 2021 We will issue tomorrow a tutorial on the AP. Please note few functions are available for key bindings from within the Simulator. We are working an a Simmconnect interface allowing for more available function. As for the throttle axis, do not use FSUIPC, sipmu use direct simulator assignment indeed. Link to comment Share on other sites More sharing options...
virtualstuff 76 Posted March 16, 2021 Share Posted March 16, 2021 8 minutes ago, SimWare said: We will issue tomorrow a tutorial on the AP. Please note few functions are available for key bindings from within the Simulator. We are working an a Simmconnect interface allowing for more available function. As for the throttle axis, do not use FSUIPC, sipmu use direct simulator assignment indeed. But remember the TCA isn't similar as what you are using in the examples Link to comment Share on other sites More sharing options...
MatzeH84 88 Posted March 16, 2021 Author Share Posted March 16, 2021 vor 9 Minuten, SimWare sagte: We will issue tomorrow a tutorial on the AP. Please note few functions are available for key bindings from within the Simulator. We are working an a Simmconnect interface allowing for more available function. As for the throttle axis, do not use FSUIPC, sipmu use direct simulator assignment indeed. Many thanks for your answer, really looking forward to it. As for the throttle, using the sim instead of FSUIPC is the last thing I want to do as I have manually keep switching several profiles. But if this is the way it is, I'll have to live with it I guess. Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted March 16, 2021 Aerosoft Share Posted March 16, 2021 For the time being yes. But things may evolve. Stay tuned ! Have fun flights. Link to comment Share on other sites More sharing options...
RALF9636 28 Posted March 16, 2021 Share Posted March 16, 2021 Vor 1 Stunde, SimWare sagte: We will issue tomorrow a tutorial on the AP. Please note few functions are available for key bindings from within the Simulator. We are working an a Simmconnect interface allowing for more available function. Is that also valid for lights? I noticed that I can't switch the external lights with my Honeycomb Alpha. It works with all other aircraft. Is that a known limitation as well, or something wrong with my setup? Link to comment Share on other sites More sharing options...
Druszcz 0 Posted March 16, 2021 Share Posted March 16, 2021 Here i can' t switch the external lights too. Works in ALL other Aircrafts. Try with keyboard and with x52 pro Link to comment Share on other sites More sharing options...
renatodmc 13 Posted March 16, 2021 Share Posted March 16, 2021 I’m not sure if it’s related, but does anyone know how to make my VRinsight MPanel work with this CRJ? It somewhat works with default aircraft (except for autopilot mode selection). Link to comment Share on other sites More sharing options...
MatzeH84 88 Posted March 16, 2021 Author Share Posted March 16, 2021 vor 27 Minuten, renatodmc sagte: I’m not sure if it’s related, but does anyone know how to make my VRinsight MPanel work with this CRJ? It somewhat works with default aircraft (except for autopilot mode selection). Partially. You may set frequencies and use the gear and flaps, but anything AP/FD related is not working at all. Link to comment Share on other sites More sharing options...
renatodmc 13 Posted March 16, 2021 Share Posted March 16, 2021 27 minutes ago, MatzeH84 said: Partially. You may set frequencies and use the gear and flaps, but anything AP/FD related is not working at all. Any clue how to make AP/FD stuff work? As there are no assignable keys for the CRJ’s AP, I can’t think of how I can make it work. Link to comment Share on other sites More sharing options...
mitchromley 1 Posted March 17, 2021 Share Posted March 17, 2021 6 hours ago, SimWare said: As for the throttle axis, do not use FSUIPC, sipmu use direct simulator assignment indeed. Why not? Seems to be working fine for me so far. Link to comment Share on other sites More sharing options...
zawadzkk 1 Posted March 17, 2021 Share Posted March 17, 2021 How you set the flaps for Airbus Quadrant addon? Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted March 17, 2021 Aerosoft Share Posted March 17, 2021 As for the flaps, don't use the FLAPS AXIS assignment. Use the INCREASE FLAPS and DECREASE FLAPS functions assigned to two buttons. The flaps in the CRJ is not seen as a linear axis but as increment and decrement. Link to comment Share on other sites More sharing options...
jaxx 1 Posted March 17, 2021 Share Posted March 17, 2021 vor 16 Stunden , MatzeH84 sagte: As for the throttle, using the sim instead of FSUIPC is the last thing I want to do as I have manually keep switching several profiles. But if this is the way it is, I'll have to live with it I guess. To use the throttle from FSUIPC (e.g. profile specific) you can check the workaround I posted in the FSUIPC forum: https://forum.simflight.com/topic/92097-crj-and-fsuipc/?do=findComment&comment=558268 Link to comment Share on other sites More sharing options...
zawadzkk 1 Posted March 17, 2021 Share Posted March 17, 2021 5 hours ago, SimWare said: As for the flaps, don't use the FLAPS AXIS assignment. Use the INCREASE FLAPS and DECREASE FLAPS functions assigned to two buttons. The flaps in the CRJ is not seen as a linear axis but as increment and decrement. This is pure madness. We expect this to work on install day from Aerosoft. No you can't assign it as Increase Decrees as the Flap is 1bit for button not 2bits. Link to comment Share on other sites More sharing options...
HighFlyer51 34 Posted March 18, 2021 Share Posted March 18, 2021 With the latest version of FSUIPC7, my Thrustmaster throttle works perfectly when selecting "Send to FS as normal axis" and selecting "Throttle1 Axis Set Ex1" resp. "Throttle2 Axis Set Ex1". I assume this will also be the case for most other throttles. Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted March 19, 2021 Aerosoft Share Posted March 19, 2021 On 3/17/2021 at 4:08 PM, zawadzkk said: This is pure madness. We expect this to work on install day from Aerosoft. No you can't assign it as Increase Decrees as the Flap is 1bit for button not 2bits. Yes you can. It perfectly works with the INCREASE FLAPS and DECREASE FLAPS assigned to two different buttons. Please login to display this image. However, we will add the FLAPS AXIS feature in the next update, next week. Link to comment Share on other sites More sharing options...
Herman g. Gerhardt 1 Posted May 12, 2021 Share Posted May 12, 2021 How do you get those axis names to show in fsuipc? I do not see this at all: Throttle2 Axis Set Ex1 Link to comment Share on other sites More sharing options...
HighFlyer51 34 Posted May 13, 2021 Share Posted May 13, 2021 @Herman g. Gerhardt Make sure you have the latest version of FSUIPC7. Then, in the axes assignment menu, select "Send to FS as a normal axis" and you should see the "Throttle2 Axis Set Ex1" in the list. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.