guenseli 76 Posted March 8, 2018 Share Posted March 8, 2018 Hello, thanks for the new BER Version! However I get an error when using the Scenery Configurator. Please login to display this image. After pressing "ok" i get the other ones with EDDB_ASL-Vor-BER EDDB_OBJ-3DGrass EDDB_OBJ-Bridges (I missed one as I pressed accidently Enter) EDDB_OBJ-Ground-BER EDDB_OBJ-Ground-SXF ... and some more. Give up now to write them all down Here are my Configurations: Please login to display this image. When I re-open the Configurator and make my settings I do not get any error reportings. When I then re-open the Configurator again, there are different settings: Please login to display this image. I have installed first the normal P3Dv4 BER package and the FTX GEN North Patch I downloaded together with the normal BER. Here is a list of the files inside F:\Prepar3D v4\Ecosystem\Aerosoft\Mega Airport Berlin Brandenburg Professional\scenery Please login to display this image. many thanks Günter Link to comment Share on other sites More sharing options...
guenseli 76 Posted March 8, 2018 Author Share Posted March 8, 2018 And this is it like it looks then in the sim. I would tend to say, that reality is better Please login to display this image. Link to comment Share on other sites More sharing options...
Drehstuhlpilot 189 Posted March 8, 2018 Share Posted March 8, 2018 Same issue here... Link to comment Share on other sites More sharing options...
dandan87 0 Posted March 8, 2018 Share Posted March 8, 2018 I'm also getting this, although I do have better ground textures, they're more of an underlay rather than the actual textures they should be Link to comment Share on other sites More sharing options...
guenseli 76 Posted March 8, 2018 Author Share Posted March 8, 2018 Oh Aerosoft .... The configurator is actually DELETING files. This is how it looks after a fresh installation, NOT using the configurator: Please login to display this image. So, tame your configurator and invest a little bit in quality control and beta testing Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted March 8, 2018 Deputy Sheriffs Share Posted March 8, 2018 Well at least for us beta tester I can say, that everything works perfect, so I guess for whatever reason the wrong installer might have been uploaded Link to comment Share on other sites More sharing options...
pmb 139 Posted March 8, 2018 Share Posted March 8, 2018 I already downloaded the 2 x 3 GB, but obviously I'd better wait with installation-...? Kind regards, Michael Link to comment Share on other sites More sharing options...
Kostis Pap 0 Posted March 8, 2018 Share Posted March 8, 2018 same here...totally wrong afcads Link to comment Share on other sites More sharing options...
dandan87 0 Posted March 8, 2018 Share Posted March 8, 2018 I've just reinstalled it, it works fine if you don't touch anything in the configurator, as seen above, it appears to delete files rather than turn them off. Link to comment Share on other sites More sharing options...
Emi 5161 Posted March 8, 2018 Share Posted March 8, 2018 2 minutes ago, pmb said: I already downloaded the 2 x 3 GB, but obviously I'd better wait with installation-...? Kind regards, Michael You can install it, however better don't use the configurator at this time Michael. We're investigating this, and I'm doing my best to get a fix quickly, however since office hours are just about over here in Germany I'm afraid it might take a bit until we can provide a fix. I'm doing my best to reach somebody to get you the correct configurator. Link to comment Share on other sites More sharing options...
JimmyJr 3 Posted March 8, 2018 Share Posted March 8, 2018 If you know, what you're doing you can also change the *.off and *.bgl-files manually. I can't wait to see my hometown airport in P3D, so I'm ignoring the configurator. Link to comment Share on other sites More sharing options...
Kostis Pap 0 Posted March 8, 2018 Share Posted March 8, 2018 yes but we cannot fly to Schoenefeld.What a pity Link to comment Share on other sites More sharing options...
guenseli 76 Posted March 8, 2018 Author Share Posted March 8, 2018 You can install it and - as others said - don't touch the configurator. Just close it with the "X" on upper right. Then go to Prepar3D v4\Ecosystem\Aerosoft\Mega Airport Berlin Brandenburg Professional\scenery and rename the files which are XY.bgl and have the same name below like XY.off as you like. In this way, you will not have it 100% correct maybe, but a first test on my side shows no drastic errors. maybe just a wrong apron traffic. But you can use the scenery and enjoy the good performance in P3D v4. Then, sleep and wait till tomorrow and hope that we get a less agressive configurator Link to comment Share on other sites More sharing options...
guenseli 76 Posted March 8, 2018 Author Share Posted March 8, 2018 vor 1 minute, Kostis Pap sagte: yes but we cannot fly to Schoenefeld.What a pity You can... just wait a day If you live in Berlin, you learn to wait ... Link to comment Share on other sites More sharing options...
Kostis Pap 0 Posted March 8, 2018 Share Posted March 8, 2018 i live in Greece, and i am made to wait, you know :))) But, i was waiting for it!Never mind! Link to comment Share on other sites More sharing options...
guenseli 76 Posted March 8, 2018 Author Share Posted March 8, 2018 vor 10 Minuten, Kostis Pap sagte: i live in Greece, and i am made to wait, you know :))) Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted March 8, 2018 Developer Share Posted March 8, 2018 I am looking into it, looks like I can reproduce the issue. Please standby. Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted March 8, 2018 Developer Share Posted March 8, 2018 Sorry for that stupid issue, but it was a small "exit" instead of "END" what result in the PopUp "All changes will be ignored! Save changes before Exit?" asking, which should only come when the X and not the save button ist pressed. When then YES was pressed, the Save runs again, but with the wrong result. Here the corrected Config Tool. When you have the situation with the missing Files 1.) Install the Addon again, but press "X" direct when the Tool opens when the install is done. 2.) Then replace the EDDBConfig.EXE with that one in the ZIP below. If the files are ok, just replace the Tool. Then it should work correct as it should. Small diffenence, big result. Sorry for that. I hope we get the Installer changed soon. Link to comment Share on other sites More sharing options...
ComSimPilot 77 Posted March 8, 2018 Share Posted March 8, 2018 Hello and thanks for the quick fix. Is it going to be an updated version soon? I ask because I would prefer to install a corrected version. Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted March 8, 2018 Developer Share Posted March 8, 2018 5 minutes ago, Ifikratis said: Hello and thanks for the quick fix. Is it going to be an updated version soon? I ask because I would prefer to install a corrected version. I hope, but the officetime of Aerosoft is over, so it could need time until tomorrow morning MET. I will post here, when I get the info that the installer is corrected. But when you install as I explain it above, you get the correct situation for now. As long as you don't click any checkbox after the Tool pop's up while the install and just exit it, nothing will happen with the files. Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted March 8, 2018 Developer Share Posted March 8, 2018 1 hour ago, guenseli said: So, tame your configurator and invest a little bit in quality control and beta testing The Beta Testers made a good job! But after your request in the this Thread here to make the Window movable, I must change the Exit procedure in the last minute, an oversee a small part. So what we learn: Never change a runing system in the last minute to make anybody happy Link to comment Share on other sites More sharing options...
dandan87 0 Posted March 8, 2018 Share Posted March 8, 2018 All working my end now, thanks for the speedy fix! These things happen Link to comment Share on other sites More sharing options...
guenseli 76 Posted March 8, 2018 Author Share Posted March 8, 2018 vor 10 Minuten, OPabst sagte: But after your request in the this Thread here to make the Window movable Ha ha, ok, I feel very guilty! vor 11 Minuten, OPabst sagte: The Beta Tester made a good job! Only one? And no, otherwise he has been nagging about the non-moving window Just kidding... Thanks for the quick fix, Oliver!!! Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted March 8, 2018 Deputy Sheriffs Share Posted March 8, 2018 1 hour ago, guenseli said: Only one? And no, otherwise he has been nagging about the non-moving window Of course there were more then one, but TBH I myself had never the Idea to check whether the Window can be moved. But from now on this will be another point to check in the next test. Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted March 9, 2018 Developer Share Posted March 9, 2018 The Installer in the shop is now fix since 03/09/2018 11:00 AM MET (10:00 AM UTC) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.