Leaderboard

Hi, There are few ways around. Some NOAA servers are working. If you get a program like Zygrib you have the winds aloft for 850 / 700 / 500 / 300 mb and then you enter the wind manually in PFPX. Of course you still have the old charts and they give you wind and temperature and again you have to enter the data yourself. We used to fly with these charts and we found that it was quite alright. Anyway we did not have anything else. OK, a computerized program like PFPX (when working) is much faster and probably more accurate but if we cannot get the computer to work we are not going to stay grounded and we have to find a way out. For regional flights the charts with forecasted winds work quite well and for overseas flights you take a wind average and load a bit more fuel and there you go. Regards, JP

Hi, to everyone reading this, im not the only facing this issue for the past recent days the Connected Flight Deck feature hasnt been working on the aerosoft airbus pro, v 1.3.1.0. I can connect but when i try to create a session or join one, nothing happens.I dont know why this is happening, but i would like to know if i,ts possible, and so when will it be fixed, ive seen other people post the same on cfd forum, i really think the cfd feature is one the best selling points for the aerosoft airbus. I understand that the cfd is also still in its infancy, but i would like to know if its going to be fixed. Best Regards

You should have a Custom Scenery folder inside the base pack and another one inside the seasons pack. At first copy the Custom Scenery folder from the base pack into your X-Plane 11 folder, then do the same with the Custom Scenery folder from the seasons pack (and, if prompted, overwrite files). After that you should be ready to go.

You need the latest scenery version which supports SAM Seasons, the older versions used TerraMaxx for the seasons. Go to your shop account and download the latest scenery version (I think it's version 1.4) and the additional seasons package, then delete your old Dortmund Scenery and install the new one and at last the seasons pack. After that you can change seasons using the SAM colors + seasons window, to get snowy winter choose 'Deep winter'.

Hi, After updating to latest update, I cannot open the configurator. Please see attached image.

Hi, yes depending on driver version and firmware there is no calibrate option in the gamecontroler window. In P3Dv4 just use the sim calibration (be sure to include the rev range). In P3Dv5 it should work without. Be sure that in the controller window your throttle positions are indicated as expected. (In idle ~15-20%) Check that you have set direct input in P3D. If you have the virtual buttons activated, remove their default assigning by sim. For me TOGA left button was assigned to view change. Others are assigned by default to gear, flap, ...

why there is no informations about the CPDLC???

Japp. Mit dem WED 2.3 (beta) kann man einen fixen Wert über AGL (anstatt MSL) setzen, da müsste dann für das Objekt ein passender negativer Wert gesetzt werden.

In your PFPX configuration/planning options restrict UKFV, similar to this: then route find again.

I make it a bit better with mine one. The mechanism which simulates the "detents" are resilient pressure pieces (Federnde Druckschrauben in German) What I did is to unscrewed these screws a little further with small pliers. ( I used same technic with my Saitek Throttle to simulate detents) All in all i think this is a design issue. There should be better used a smaller pressure piece which fits the little room better to simlate the detents. Probably I will try to remove the original screws with others but I do that later if there are more Throttles on stock cause if I damage mine xD !!! Be aware if you manipulate on your throttle you can probably loose your Manufacturer guarantee !!! Cheers.

Strange problem. We will release today a new stable updte. maybe it's solved afterwards.

Will take a look

Of course you have !!! **Currently Grib Filter and OpenDAP applications are unavailable and we are working to restore services.** https://nomads.ncep.noaa.gov/

Hallo PilotBalu, es hat an simHeaven_X_Afrika gelegen. Ich habe die Afrika-Beta installiert und nun wird alles normal geladen, auch z.B. LEMD. Danke nochmals an diese Stelle für die schnelle, professionelle Hilfe! Gruß Rolf

Das hat bei mir nicht funktioniert.

If you haven't already seen it, this related post, specifically issue 1, sounds like what you're seeing. As Jo Erlund, the developer notes, the update should resolve it. As he's also planning to check to see when the update will hit the Marketplace, you might want to follow that post and see what Jo learns.

Actually, the idea was to make the Danube river navigable. I think it will be enough to make animated two dry cargo ships going to meet each other along the river and a small boat.

Hi Markus, 1, This issue was resolved in v1.02 and as far as I'm aware that version was submitted for approval to the marketplace, I'll check tomorrow what the status is. 2, The stands around the Terminal are labeled as "gates" and these don't have ramp connections (only large GA and Cargo parkings has them if I remember correctly), the reason for this is to avoid having GA aircraft parking at those stands. 3, I've found the issue causing this and it's going to be fixed in the next version (1.03). 4, Is that AI traffic or an online player? 5, There shouldn't be any issues capturing the localizer, as Christian already said above keep in mind is that you'll need to set the frequency manually since the automatic tuning doesn't work for 3rd party airports.

Die neue X-Europe 5.2 ist unter https://simheaven.com/simdownloads/x-europe-5/ erhältlich. Die Vegetation Library habe ich nun nicht mehr reingepackt, da hat sich auch nix geändert. Falls das jemand gelöscht haben sollte, unter https://simheaven.com/simdownloads/vegetation-library/ bekommt man sie wieder. Falls jemand manche Windturbinen nicht hoch genug sind, das dürften die sein, die in OSM keine Höhe haben. die sind in der library.txt auf 25m gesetzt, das wollte ich noch auf 50m setzen, ich hab es gestern schlicht übersehen. In Zeile 587 - 590 könnt ihr sie auf eine andere Höhe eurer Wahl setzen, mögliche Höhen sind direkt darunter. Ihr müsst alle 4 Einträge ändern, einfach nur die Zahl, denn das fett markierte ist die Höhe: Wind_turbine_onshore_0025_00_red_nolights.obj Und es gibt noch was Neues auf meiner Webseite: X-Europe Seasons Dies ändert über SAM die Texturen der Gebäude auf Winter: @FlyAgi hat sich die Mühe gemacht und alle Texturen einschließlich der VFR-Objekte nach Winter zu ändern, sowie die Steuerbarkeit über SAM zu integrieren. Danke dir Agi!!! 🥇 Die Seasons funktionieren nur ab X-Europe 5.2 und im deep winter und werden über die bestehende 5.2 kopiert. Eine kleine Anleitung liegt dem Archiv bei, Download unter https://simheaven.com/simdownloads/x-europe-seasons/

So sehen die neuen farm Fassaden aus:

It looks like I sat up late today. This is how Bratislava looks today.

P.S. Kamzik in the simulator. The bridges are also ready. Starting tomorrow, I will start working on City Panoramas. I think that I will need to work with the city for two or three weeks and then I will return to the airport. By the end of this year, I plan to complete the Bratislava project. The organizational work will remain with the release and I hope that in January 2021 we will see Bratislava.

Great! Åke

Die Fehler kommen aus der X-Africa, die oben drüber steht und deren Library dieselben Objekte zuweist. Disable mal die X-Africa komplett, wenn es dann läuft guck nach ob im Ordner simHeaven_X-Africa-4-scenery\objects\camping 57 Objekte sind, laut log.txt scheint da was zu fehlen und nicht nur da. Guck auch beispielhaft ob das Objekt F:\simHeaven_X_Africa_beta\00a v. 0.9\simHeaven_X-Africa-4-scenery/objects/camping/Wohnwagen7.obj vorhanden ist.

I thought about how best to make Kamzik. And I decided to cut Kamzik like a pie Of course, I will remove everything superfluous

Shalom and greetings all my pals, Presenting a nice Alaska Airlines Hercules action via flight from PAAQ Palmer Municipal Airport located 1 mile southeast of the central business district of Palmer in Matanuska-Susitna Borough of Alaska to PAHO Homer Airport located two miles east of the central business district of Homer in the Kenai Peninsula Borough of Alaska. Getting ready for fight to Homer that is considered and known as the Halibut Fishing Capital of the World. Starting engines!! Right engines started and revved up Starting left engines Gauges indicating that engines are ready for taxi! Starting to taxi to short of runway 34 Entering into taxiway on way to runway 34 Still taxiing on taxiway towards the runway Nice cockpit view of mountains of Chugach State Park Holding short of runway 34 to check for any GA plane Entering into runway 34 with background view of Buffalo Soapstone mountain range Cockpit view of entering into runway 34 Ready for take off!! Roaring down the runway Airborne on climb to fl200 making sharp left turn to avoid high mountains ahead You can see how high the mountains are that the plane managed to avoid after successful sharp left turn after take off Still climbing to fl200 Now cruising southbound at fl200 Passing PAED Elmendorf Air Force Base located north of Anchorage Passing Port of Anchroge seen off tip of right wing where you can see three cargo ships docked at and passing Anchorage suburb of Wilson Village seen on left side of the left wing Passing PAMR Merrill Field airport located one mile east of downtown Anchorage where you can see waters of Westchester lagoon on left side of the screenshot Passing PANC Ted Stevens Anchorage International Airport 5 miles outhwest of downtown Anchorage where you can see frozen water of lake Spenard behind right wing Passing entire landscape of the same airport leaving the airport grounds where you can see Kincaid Park in front of left wing Passing Fire island off Anchorage where you can see unpaved and unnamed runway Cruising through clouds across waters of Cook Inlet Descending through clouds At 5,000 ft flying through clouds to get ready for runway approach to runway 03 On final runway approach 30 seconds before runway passing view of waters of Beluga Slough where you can see lake street road in front of the plane nose 5 seconds before touchdown TOUCHDOWN Front landing gear gliding down in most graceful manner Front wheels making runway contact Braking down Taxiing to cargo apron Thank you for viewing. Please stay tuned for next exciting flight Regards, Aharon

Hi, thank you very much for your work. I loved the CRJ for FSX and can't wait to fly this one. I have one question on the autopilot, will it be custom or based on the MSFS one? One of the weakest points for me in MSFS2020 is that the autopilot is extremely buggy and totally unreliable. I am really hoping that the CRJ will solve this problem. I am sorry to say that Asobo doesn't seem able to address this. It gets worse at every release

When can we expect the patch for the Madrid Professional Scenery (P3D V4)? To my surprise I see for runway R14R touchdown markings and for runway R36L touchdown markings and the aiming point marking. wrote on Aug 28, 2019 Yes, this markings needs to be remove with the next patch. The groundlayout was based on a version from 2008 and was change to the actual status, but this markings gone lost by the remove. Strange that no one answers

läuft eh noch nicht

I think they said it’s delayed 6-9 months, so summer 2021.