Just completed a round trip zurich-JFK. flight out was fine absolutely zero issues & the flight back was fine until the approach when i ran in to some problems...   Once established on the ILS i put the gear down and got 3 green indicated but then had a warning that the landing gear wasn't down on short final, after a go around I seen the landing gear was down on visual inspection but the doors had not fully shut back up. On my 2nd attempt at landing I had the same issue and once landed realised I also had no reverse thrust with both hardware & then keyboard commands, once I came to a stop and checked the outside view seen the aircraft itself was slightly sunk into the ground and the wheels despite being down were clearly having some issues with the rear ones not in the horizontal position as you can see from the photos attached, I then tried to taxi off the runway to find I also had no nose wheel steering.   after having a search of the forum I see I'm not the only person to run into this exact same issue and that thread lacked any sort of solution or answer to why it happened & frankly was annoying to read as all the replies from anyone associated with aerosoft seemed to suggest it was a user problem over an aircraft problem which it certainly isn't, calibration issues don't cause what I experienced with the gear indication and the aircraft being sunk into the ground with a rear gear not in the horizontal position..., especially when I'd already completed a trip with no issues and didn't restart the sim between flights, nor did I use time acceleration.   aircraft - A330-300 RR variant (Swiss livery) (latest version installed as I only bought it about a week ago & double checked via the aerosoft updater) sim - P3d 4.5 (just had a full system restore & re-install 2-3 weeks ago)      

Please login to display this image.

Please login to display this image.

Es funktionieren einige Provider aus dem 1.30-Bestand nicht mehr. Oscarpilote hat das in seinen Notes zur Alpha-Version 1.40 vermerkt und eine Überprüfung in Aussicht gestellt. "Here" scheint im Gegensatz zu den anderen großen Foto-Providern allerdings ziemlich restriktiv zu sein und ändert laufend die eigenen Zugangsprozeduren, vielleicht auch nur, um den sicher nicht im "Here"-Unternehmenskonzept vorgesehenen, kostenfreien Datenabgriff durch uns XPlaner abzudrosseln. 

Hallo @FW_R,   schaue mal im Installationsordner von X-Plane 12 nach, dort müsste der XP12-Installer X-Plane 12 Installer.exe vorhanden sein. Ggf. kann man ihn auch unter https://www.x-plane.com/desktop/try-it/ herunterladen (Free Demo). Diesen starten und mit Update X-Plane das Programm aktualisieren. Hier müsste X-Plane dann auf die letzte finale Version 12.0.9-rc-5 installiert werden.   Das Menü in der DVD-Version kann etwas abweichen, dies ist von der Download-Version.  

Please login to display this image.

  Wenn man Beta-Versionen ausprobieren möchte, kann man im nächsten Fenster den Haken für "Sowohl auf neue Betas als auch Updates überprüfen" setzen.   Gruß Horst

Hallo,   habe am Freitag, den 10.05.2024 die X-Plane 12 Box (DVD) bestellt und am Samstag (Vorgestern), den 11.05. per DHl, als Paket schon erhalten.   Vielen Dank schon einmal dafür!   Installation ist ohne Probleme in der vom Setup vorgegebenen kleineren Bereiches der Szeneriedateien vonstatten gegangen.   Nun stellt sich heraus, da die Version 12.03 der gelieferten X-Plane 12 Box (DVD) nicht updatebar ist, ich auf ein favorisiertes   Wetter Addon von HIFI Technologies Active Sky XP 12, Version B8795, das ab einer X-Plane  12 Version 12.04 vermarktet wird,   mit der X-Plane 12 Box (DVD) Version 12.03 Verzicht üben muß.   Mit freundlichen Grüßen      

Hi Dave Things not gone too well,  did a system reset from local disk (Disconnected data Hard Drive) and cleared files from C:, installed FSX to C:, TacPack and F6. I knew I was on a sticky wicked when the LightningF6.dll wasn't even recognised on first run of F6. I did have a few issues installing FSX but it seem to sort itself out... a bit of fiddling and I got the DLL recognised.   Anyway nothing worked, to say I was dissappointed would be a t.!otal underestimate!   So next I went for a PC reset using a USB created by the Media Creation Tool.. I ddn't quite go as far as reformatting the C drive. The reset went OK with no problems, I installed FSX on the D drive with no issue, I didn't insatall TacPack as to be the same as my spare PC, installed SP1 and 2 with no issue, installed F6 with no issue. But.... again nothing worked although the dll registered OK.   I think this is the end of the line, I will have another look at my spare PC tomorrow just to check I haven't done anything silly as I am in robot mode.. but I am sure I didn't do anything special other than change the ferrytank panel.   I think then I will have rest from it and rebuild in slow time...   Anyway thanks again for your help, pity the outcome is not as expected. It now makes me think whether it has worked at all on my current PC and only on my previous one as I did have a spell on the Airbus...  Cheers Chris