P3R1 1 Posted August 13, 2015 Share Posted August 13, 2015 HiWhen flying into this Airport from a distance i get this weird elevation anomaly:Only happens when flying into this Airport from a distance, lets say a flight from ENVA, ENBR and so on.All is fine if i start from this Airport.If i then disable this file A_ENGM_FTX_Norway_Fix.BGL the elevation problem is gone but then i get some Airportobjects elevated in the air, some barriers and train tunnel objects at the end of the new Pier and probably some other stuff aswell.Tried manually disabling all ENGM related files in FTX Norway, Set Mesh Res to 5 and 1m, Executed FTX Vector elevation tool, disabled mesh, Checked for other ENGM ALT files, made sure the scenery is on top in scenery library, even did a clean install to no avail.Never had this issue with earlier versions of Mega Airport Oslo V2.0--------------------------------------------------------------------------------------------------------------------------------------------Also i have to disable this file: Alpha_Flatten.bgl to get GSX Ground Services X working correctly at this Airport?Also missing the Safedocks in P3D.--------------------------------------------------------------------------------------------------------------------------------------------Software:Win7x64P3D v2.5.12946.0Mega Airport Oslo V2.0 (FSX+P3D) v1.06FTX Global Base, LatestFTX Global Vector, LatestFTX Global OpenLc Europe, LatestFTX EU Norway, LatestFTX Libraries, LatestPilots Ultimate Mesh.GSX Ground services XPMDG NGX.BrPer Please login to display this image. Link to comment Share on other sites More sharing options...
VidHl 1 Posted August 14, 2015 Share Posted August 14, 2015 This particular issue is mentioned in this thread in the german language forum: http://forum.aerosoft.com/index.php?/topic/97390-engm-v20-106-höhenproblem/Probably a good idea to have a post here in the english language as well. I have noticed this problem after I installed v 1.06 in P3Dv2.5.Strangely it doesn't happen when I start a flight from ENGM. It happens for me only when ENGM is the destination airport.I did not notice this in previous versions, which lead me to believe this is a bug introduced in the 1.06 version.I might also mention that I have Norway mesh installed, but ENGM is at higher priority. MESH_RESOLUTION=22. This is very strange indeed, could it be something with third party mesh? Link to comment Share on other sites More sharing options...
P3R1 1 Posted August 15, 2015 Author Share Posted August 15, 2015 Tested with mesh on and off to no avail.FTX Norway comes with mesh also i believe but it wont make sense because this particular file: A_ENGM_FTX_Norway_Fix.BGL was made to make this airport compatible with exactly FTX Norway. Link to comment Share on other sites More sharing options...
Erling Torstensen 5 Posted August 26, 2015 Share Posted August 26, 2015 I have this probloem as well. I had it on Windows 74 64 bit. I reinstalled my computer and upgraded to Windows 10 64 bit, and I still have the same problem. I can fix it by resyncing my AES before I start FSX. So every time I am going for a flight out or in to ENGM, I have to resync my AES, and it works. Hope you guys sort this problem out. Thanks! Link to comment Share on other sites More sharing options...
Aerosoft Jonas S. 466 Posted August 27, 2015 Aerosoft Share Posted August 27, 2015 Do you all have AES installed? Jonas Link to comment Share on other sites More sharing options...
VidHl 1 Posted August 27, 2015 Share Posted August 27, 2015 I do not have AES installed Link to comment Share on other sites More sharing options...
Peter Lund 7 Posted August 27, 2015 Share Posted August 27, 2015 I got the same issue with the elevated Airport object (tunnel and blast fence at the end of the new pier). But for me it´s always when I start from ENGM. If returning or flying into ENGM it´s normal.I use ORBX FTX Norway, ORBX Europe and ORBX vectors with Airport Elevation Corrections checked. I have AES installed and using it./Peter 2015-7-2_13-3-43-991.BMP 2015-7-2_10-47-31-156.BMP Link to comment Share on other sites More sharing options...
Rudderduck 3 Posted August 28, 2015 Share Posted August 28, 2015 I wonder if Jo Erlend could take a closer look at the elevation of the building behind gate 173.This is the only object I've seen that levels down to the same elevation as the ditches I get. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Erling Torstensen 5 Posted August 30, 2015 Share Posted August 30, 2015 I have the exact same problem as Peter Lund, with same addons installed. 2015-8-29_6-26-38-536.BMP 2015-8-29_6-26-48-436.BMP 2015-8-29_6-46-31-363.BMP Link to comment Share on other sites More sharing options...
Beardyman 17 Posted August 30, 2015 Share Posted August 30, 2015 I've bought Oslo scenery just today ( v106 )So far made 2 test flights, and on both have elevation and/or texturing problems.Runways and taxiways are partly covered by some green ground textures, tunnel entry is hovering in the air.My system - FSX SP2 + ORBX Global + Vector + DX10 Steve Fixer ( no FTX Norway, no AES )I have checked Oslo scenery by Vector Configuration Tool, but scan show no problem with this scenery.Interesting thing is that if start flight from Oslo airport, moving around and land, then everything is fine, if make short trip starting from different airport and Oslo is trip destination then all elevation/texturing problems pop up. Hope scenery author is able to figure out problem as right now with mentioned issues Oslo is out of my destination.That is a pity as scenery is nicely done and extremely fps friendly BR/Beardyman Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Beardyman 17 Posted September 6, 2015 Share Posted September 6, 2015 WOW, Aerosoft - what a brilliant customer support !One week passed and not a single word from developer team ...In such case for me Oslo was first and last scenery from Aerosoft. Link to comment Share on other sites More sharing options...
Peter Lund 7 Posted September 6, 2015 Share Posted September 6, 2015 I have the exact same problem as Peter Lund, with same addons installed. 2015-8-29_6-26-38-536.BMP2015-8-29_6-26-48-436.BMP2015-8-29_6-46-31-363.BMPSolved by installing v.106.WOW, Aerosoft - what a brilliant customer support !One week passed and not a single word from developer team ...In such case for me Oslo was first and last scenery from Aerosoft.Try to run it again and also flush the scenery.cfg. Link to comment Share on other sites More sharing options...
Beardyman 17 Posted September 7, 2015 Share Posted September 7, 2015 Peter, what do you mean by "flush scenery.cfg" ? Link to comment Share on other sites More sharing options...
Peter Lund 7 Posted September 7, 2015 Share Posted September 7, 2015 In FTX Central there is under one of the menu a possibility to flush the scenery.cfg where a new one will be made when you start FSX again. Link to comment Share on other sites More sharing options...
Beardyman 17 Posted September 7, 2015 Share Posted September 7, 2015 Hmm... I have recent version of FTX Central and cannot find this option Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted September 7, 2015 Deputy Sheriffs Share Posted September 7, 2015 Also never heard about such an option. You can delete the scenery.cfg and FSX will use the default one, but this will have no addon sceneries included.I'll try to recreate your issue later this evening. Link to comment Share on other sites More sharing options...
Boeing 707 8 Posted September 7, 2015 Share Posted September 7, 2015 HiAre you using ORBX FXT Global?Make sure that OSLO does have higher priority than ORBX FXT Global in the addon scenery (where you can change up / down in the scenery list)The go to the FTX Vector Configurator and to the tab Airport Elevation Corrections and run the auto configurator.You can also try to go to the manuel configuration and find ENGM and and disable it.I had a similar problem with the Vilnius International addon and i just run the Airport Elevation Corrections and the i choose the manuel configuration and disable EYVIThat solved the Elevation problem for meHope that you will solve the problem CheersDennis Link to comment Share on other sites More sharing options...
Peter Lund 7 Posted September 8, 2015 Share Posted September 8, 2015 Okay,I thought flushing / deleting the Scenery.cfg would help, but it only help in the short term. The problem remain.I got both Orbx Global, Vectors and FTX Norway. Oslo is the second highest and all the ORBX products are very low in the chain. AEC have also been run after installing Oslo.I have also tried what they suggested in this topic http://www.orbxsystems.com/forum/topic/100841-norway-elevation-problem/?hl=engm#entry911797/Peter Link to comment Share on other sites More sharing options...
Beardyman 17 Posted September 8, 2015 Share Posted September 8, 2015 Strange thing is that Vector Configurator does not see ENGM. Link to comment Share on other sites More sharing options...
Peter Lund 7 Posted September 8, 2015 Share Posted September 8, 2015 Just landed after a roundtrip to ENZV and the problem is back. Link to comment Share on other sites More sharing options...
Peter Lund 7 Posted September 12, 2015 Share Posted September 12, 2015 + when loading FSX with the aircraft at the gate it elevated. But if I load FSX with the aircraft on the runway there are no problem. Link to comment Share on other sites More sharing options...
Beardyman 17 Posted September 12, 2015 Share Posted September 12, 2015 Peter, do not bother reporting issues, nobody from Aerosoft deal with it - no answer, no interest... Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted September 12, 2015 Deputy Sheriffs Share Posted September 12, 2015 The fact that you do not get a response every day doesn't mean nobody from Aerosoft is interested.I tested it meanwhile and found the following:I can recreate the problem with FTX Central set to Europe, which means that (in my case) FTX Norway is active.I can not recreate it, when FTX Central is set to Global, which means FTX Norway is not active.So it looks like as if FTX Norway is causing some trouble, which leads my to the question why you guys always blame Aerosoft? Go over to the Orbx forum and ask JV how to solve it.In the meantime I'll try to do some other tests by deactivating various files. But as it is very time consuming, it will take a while. Link to comment Share on other sites More sharing options...
PatrickM 49 Posted September 12, 2015 Share Posted September 12, 2015 I also get the issue 'Global'. FS Global Ultimate is also installed.. Could that be a mesh priority issue? Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted September 12, 2015 Deputy Sheriffs Share Posted September 12, 2015 Well, I also have FSGlobal Ultimate and do not see an issue. But if your scenery order is not correct, maybe it is an issue. Usually FSGlobal is placed with a very low priority in the library, somewhere directly above the "Basis" scenery entries. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.