SpeedbirdSimulation 73 Posted February 22 Share Posted February 22 im getting errartic pushbacks. i have tried different airports and unplugged all hardware https://youtu.be/CbrFUvdPu4g?si=Jra3XQ5AimsPkaL2 please see above video Edit: please see solution Link to comment Share on other sites More sharing options...
Administrator Raphael Jakob 459 Posted February 22 Administrator Share Posted February 22 different airports with different aircraft or always the A306? Link to comment Share on other sites More sharing options...
SpeedbirdSimulation 73 Posted February 22 Author Share Posted February 22 7 minutes ago, Raphael Jakob said: different airports with different aircraft or always the A306? I've tried, the 738, A306, and Fenix 320 Same issues Link to comment Share on other sites More sharing options...
Administrator Raphael Jakob 459 Posted February 22 Administrator Share Posted February 22 Can you please try it with the default Airbus. Do you have any additional software installed in this area? Link to comment Share on other sites More sharing options...
Aerosoft Sven Telljohann 500 Posted February 22 Aerosoft Share Posted February 22 Have you bound the tool with the Linker add-on? Link to comment Share on other sites More sharing options...
Dave5150 3 Posted February 22 Share Posted February 22 I was getting this too, and on a hunch decided to unload the beta of MSFS and roll back to the stable version... that fixed it for me. Pushbacks are dead on now. On MSFS beta, pushbacks were doing S-turns and 360's all over the place. Drunk tug driver! So it might still be an issue for when the current beta goes stable. 1 2 Link to comment Share on other sites More sharing options...
SpeedbirdSimulation 73 Posted February 22 Author Share Posted February 22 27 minutes ago, Dave5150 said: I was getting this too, and on a hunch decided to unload the beta of MSFS and roll back to the stable version... that fixed it for me. Pushbacks are dead on now. On MSFS beta, pushbacks were doing S-turns and 360's all over the place. Drunk tug driver! So it might still be an issue for when the current beta goes stable. Ah I forgot I was enrolled in the Beta, is there a quick fix for rolling back or does it require full reinstall? I'm on Steam and don't uave the best Internet/ time to download the whole sim again! Link to comment Share on other sites More sharing options...
Aerosoft Sven Telljohann 500 Posted February 22 Aerosoft Share Posted February 22 Yes on Steam they can just revert back to the stable version. To exit a beta on Steam, follow these steps: 1. open the Steam library. To do this, click on the "Library" tab in the Steam interface. 2. search for the game whose beta you want to exit. Enter the name of the game in the search bar or scroll through your library until you find it. 3. right-click on the game and select "Properties" from the menu. 4. switch to the "Betas" tab in the properties window. 5. select the option "None - unsubscribe from all betas" in the "Beta" drop-down menu. 6. click on "Close" to save the changes. Link to comment Share on other sites More sharing options...
SpeedbirdSimulation 73 Posted February 22 Author Share Posted February 22 8 minutes ago, Sven Telljohann said: Yes on Steam they can just revert back to the stable version. To exit a beta on Steam, follow these steps: 1. open the Steam library. To do this, click on the "Library" tab in the Steam interface. 2. search for the game whose beta you want to exit. Enter the name of the game in the search bar or scroll through your library until you find it. 3. right-click on the game and select "Properties" from the menu. 4. switch to the "Betas" tab in the properties window. 5. select the option "None - unsubscribe from all betas" in the "Beta" drop-down menu. 6. click on "Close" to save the changes. Many thanks for the information, and this 100% doesn't do a reinstall? Just a side note I will edit topic title so this reflects Beta builds, in guessing this is a change down to the ground physics that was changed, but will also be worth the dev team getting a Beta build so changes can be made when the sim enters release build Link to comment Share on other sites More sharing options...
Aerosoft Sven Telljohann 500 Posted February 22 Aerosoft Share Posted February 22 Your game will not be reinstalled. You will simply be reset to the stable version. Link to comment Share on other sites More sharing options...
Ben Trezise 0 Posted February 22 Share Posted February 22 i've had issues with the elevator controls being reversed when using an xbox controller on the latest stable msfs build Link to comment Share on other sites More sharing options...
Aerosoft Sven Telljohann 500 Posted February 22 Aerosoft Share Posted February 22 vor 39 Minuten schrieb Ben Trezise: i've had issues with the elevator controls being reversed when using an xbox controller on the latest stable msfs build There is already a report about it here. Please report it here again. So that we can keep things separate and maintain an overview. 1 Link to comment Share on other sites More sharing options...
STF-DIR 3 Posted February 29 Share Posted February 29 Am 22.2.2024 um 17:11 schrieb Sven Telljohann: Your game will not be reinstalled. You will simply be reset to the stable version. Hello, i have the Same and are also in the Beta. So it seams the only possible Option is to opt out of the Beta ? Is that correct ? What about the Sound ( Parking Brake set, starting Pushback and so on ) which i also dont get ? The ATC Sound works btw. Link to comment Share on other sites More sharing options...
SpeedbirdSimulation 73 Posted March 5 Author Share Posted March 5 On 2/29/2024 at 12:02 PM, STF-DIR said: Hello, i have the Same and are also in the Beta. So it seams the only possible Option is to opt out of the Beta ? Is that correct ? What about the Sound ( Parking Brake set, starting Pushback and so on ) which i also dont get ? The ATC Sound works btw. Correct then only way to use as intended at this juncture is to opt out of the Beta As for sounds I can't speak about that as have had no issue Link to comment Share on other sites More sharing options...
STF-DIR 3 Posted March 5 Share Posted March 5 What about Aerosoft ?? Any Updates or statements ? Link to comment Share on other sites More sharing options...
Administrator Tom 392 Posted March 5 Administrator Share Posted March 5 Hello, Apologies for the delay - This is currently due to a SU15 Beta issue. At this time, the only option is to indeed opt out of the beta, but the issue should be resolved upon the full SU15 update being released. Link to comment Share on other sites More sharing options...
STF-DIR 3 Posted March 5 Share Posted March 5 ...ok, i dont want to do that because my sim is running very good right now and i dont want to take the Risk. You can not do anything for the meantime until the final SU15 ? Link to comment Share on other sites More sharing options...
Administrator Tom 392 Posted March 7 Administrator Share Posted March 7 Could you give the latest update a try? Full patch notes can be found below. Link to comment Share on other sites More sharing options...
STF-DIR 3 Posted March 9 Share Posted March 9 Hello, the new Version works so far...thanks for the Update. But i have still problems to create a Profile for my Aircraft ?? As you see in the Picture, the Name is prosim-b738-2023 Please login to display this image. Because of that i created a profile called "prosim_b738_2023.json" and put something in to see if it works, but it does not. What is the correct Name for the Profile ? I am sure you know the Prosim737 Suite Aircraft, if not, it can be downloaded here just to test. I need to know the right name to get it working please. I added the profile too. Matthias prosim_b738_2023.json Link to comment Share on other sites More sharing options...
Administrator Tom 392 Posted March 11 Administrator Share Posted March 11 On 3/9/2024 at 9:53 PM, STF-DIR said: - Snip - prosim_b738_2023.json 1.88 kB · 0 downloads Hi, It looks like there was a missing comma on line 22 which resulted in an invalid JSON format. I've quickly added this. Could you give the attached file below a try?prosim_b738_2023.json Link to comment Share on other sites More sharing options...
STF-DIR 3 Posted March 11 Share Posted March 11 Hello, thanks, found it ... that fixed it. Sometimes no the Truck is not connecting like it should. It tries to connect but comes from 90 degrees not from the Nose direction...? Hard to explain. I will record a video if it happens next time. But for now it works, but the Doors are not working together with Prosim. To open a Door running with Prosim737, you have to change a Variable ( via Prosim SDK ) in Prosim to get the Door opened. I am not sure if Aerosoft is willing to implement this...normally it is very easy and i could help if needed. Matthias Link to comment Share on other sites More sharing options...
grizzly_m 0 Posted March 20 Share Posted March 20 Hello everyone. The update works well with the simupdate 15 beta... But not in VR. When in VR, the erratic pusback is still present on my system. If I leave the VR mode, everything works well. Any idea ? Link to comment Share on other sites More sharing options...
gimbalaxis 0 Posted March 31 Share Posted March 31 Hi, today (March 31, 2024) I have a new install of MSFS SU15 Beta 1.37.11.0 on a factory reset Xbox X, with Premium Deluxe and all World Updates. I purchased and installed the Pushback Toolbar Pro from the in-sim Marketplace, and using "Planned Pushback", and getting VERY strange pushbacks, extreme S-curves, like the tug driver is drunk. Is this because MSFS is in beta, or...? Testing the Longitude, 787-10, A320neo at KLAS. (I know one normally doesn't push a smaller plane like the Longitude, but sometimes planes spawn in awkward places, and pushback should work...) Please login to display this image. Link to comment Share on other sites More sharing options...
TomReborn 429 Posted March 31 Share Posted March 31 You're in a beta so it's expected to have bugs, beta sim updates affect a lot of aircraft too in terms of performance and behaviour Link to comment Share on other sites More sharing options...
Mark Huskison 0 Posted April 1 Share Posted April 1 On 3/7/2024 at 1:31 PM, Tom said: Could you give the latest update a try? Full patch notes can be found below. At this time, It does not appear that update 1.0.2 has fixed the sim update 15 S-turns/erratic pushback issue. I tried it with multiple aircraft - Asobo/stock A320, PMDG 737-700/800/900, Asobo 787-10. With planned pushback, I got an erratic, S-turning pushback path. It typically takes a small turn in the wrong direction on starting pushback, then an oscillating S-turning path, with oscillations get larger until it's making sudden, sharp 90+ degree turns over the course of 30-60 seconds or so. Manual pushback mode seems to work fine - it only seems to be happening in Planned Pushback mode. I also tried with the new V2 A320 from Inbuilds - and oddly enough it behaved fine with both planned and manual pushback in that aircraft. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now