Deputy Sheriffs mopperle 4162 Posted November 20, 2018 Deputy Sheriffs Share Posted November 20, 2018 vor 1 minute, f.skywalker sagte: The problem is "INSTANT= load. When i load everything without "INSTAND" it is working perfect. Frank As said, works fine here Link to comment Share on other sites More sharing options...
Fragged^2 40 Posted November 20, 2018 Share Posted November 20, 2018 I tried again with hitting load on fuel first and then instant and it worked as supposed. If I just do the instant load for all, it's bugged. Just hitting fuel and then immediately hitting instant after that it works fine. I'm on 1.2.1.5. Link to comment Share on other sites More sharing options...
f.skywalker 17 Posted November 20, 2018 Share Posted November 20, 2018 Yes Sir Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted November 20, 2018 Deputy Sheriffs Share Posted November 20, 2018 And I clicked on "INIT Loadsheet" and then on "LOAD INSTANT" and it worked perfect. So hard to track down what is going on here Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted November 20, 2018 Deputy Sheriffs Share Posted November 20, 2018 I'll going to ask the dev, how the data from the txt file generated by the fuel planner are being processed, maybe we get a hint where to look at. Link to comment Share on other sites More sharing options...
f.skywalker 17 Posted November 20, 2018 Share Posted November 20, 2018 Thanks for Help. If some News write Frank Link to comment Share on other sites More sharing options...
Fragged^2 40 Posted November 20, 2018 Share Posted November 20, 2018 14 minutes ago, mopperle said: And I clicked on "INIT Loadsheet" and then on "LOAD INSTANT" and it worked perfect. So hard to track down what is going on here I just tried again in the A319 and it worked as intended. With the A321 couple minutes earlier I had the issue of loading 2.4. I don't think it's an issue with fuel planner as MCDU 3 always shows the correct values. My A321 also has an issue where it shows two of the fuel pump off lights illuminated without battery / ground power. Link to comment Share on other sites More sharing options...
ozgulkagan 18 Posted November 20, 2018 Share Posted November 20, 2018 With A320 CFM, I got the problem twice. I got it on both 1.2.1.4 and 1.2.1.5... So it might not be a 1.2.1.5 issue. Here are the screenshots. I clicked to load fuel + pax + cargo as usual. When loading of PAX completes, autoPrinted loadsheet/info shows 0.0 for fuel, but MCDU works normal. Right clicking the BLOCK, gives 5.4. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
ozgulkagan 18 Posted November 20, 2018 Share Posted November 20, 2018 I've a Guess. The problem might be with CENTER TANKS having no fuel load for the trip... Maybe, loadsheet print only shows the fuel value of center fuel tanks? Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted November 20, 2018 Share Posted November 20, 2018 I have to apologize, I thought the problem you guys were experiencing was with the Fuel Planner Values not correctly making their way to MCDU#3. So you're saying it's with the printed load sheet alone? Link to comment Share on other sites More sharing options...
ozgulkagan 18 Posted November 20, 2018 Share Posted November 20, 2018 At least in my situation, yes. I think that thread started as you said, then evolved into fuel not printing correctly. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted November 21, 2018 Deputy Sheriffs Share Posted November 21, 2018 TBH I could not recreate any of the mentioned problems with none of the models. Also the loadsheet being printed shows the correct values: Please login to display this image. Please login to display this image. But still trying to find out what might cause theproblems on your side. Link to comment Share on other sites More sharing options...
f.skywalker 17 Posted November 21, 2018 Share Posted November 21, 2018 vor 17 Stunden , DaveCT2003 sagte: I have to apologize, I thought the problem you guys were experiencing was with the Fuel Planner Values not correctly making their way to MCDU#3. So you're saying it's with the printed load sheet alone? it's not just about the printed paper. After you have loaded the Fuel manuel you can use instant Load and it works in the MCDU (Block)When does the printer print? Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted November 21, 2018 Deputy Sheriffs Share Posted November 21, 2018 As said, I can NONE of the reported problems in this topic recreat. no matter whether I use instant load or by pressing the 3 load buttons one by one. And all values are tranfered correctly to the 2nd INIT page. But as I also said I'm trying ti find out what could cause the problems on your side. vor 9 Minuten, f.skywalker sagte: When does the printer print? When you select the 3 loadings (Pax, Cargo, fuel, not "load instant"!) and when all 3 are finished, the loadsheet will be printed automatically. Link to comment Share on other sites More sharing options...
f.skywalker 17 Posted November 21, 2018 Share Posted November 21, 2018 Thanks Mopperle. I have understand all.... Link to comment Share on other sites More sharing options...
ozgulkagan 18 Posted November 25, 2018 Share Posted November 25, 2018 I think I got the problem. The printer prints the value you enter in the INIT2 page for BLOCK. If you haven't entered it when the loading of Pax / Cargo / Fuel completes, it prints ZERO. In the printed loadsheet, TIF is the value for the fuel needed for the flight (from FuelPlanner). The problem is, I was waiting for the print to come out, to enter INIT2 values, like a loadsheet is printed and I now know the ZFW and Block values and I enter them. I think this is wrong. In the example. I've entered 6.8 as Block, while Fuel planner shows 5.6. Printer got it right with TIF, copied my MCDU INIT2 BLOCK value to BLOCK. LAW value doesn't seem correct. What is the correct way of doing thins here and why is LAW incorrectly showing a very low value... Thanks. Please login to display this image. Link to comment Share on other sites More sharing options...
Fragged^2 40 Posted November 25, 2018 Share Posted November 25, 2018 20 minutes ago, ozgulkagan said: I think I got the problem. The original post doesn't mention the printer at all. The issue is that sometimes INIT B, Block Fuel loads a value of 2.4 (which is the default block fuel) instead of the actual block fuel loaded into the plane. Link to comment Share on other sites More sharing options...
Choobe 33 Posted December 4, 2018 Share Posted December 4, 2018 Hi! Regarding the LAW incorrectly shown, please upload the corresponding "Aerosoft\General\A3XX Fuel Planner\LoadSheets\LoadSheet*.txt" file from the flight when it was wrong. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.