Meyerflyer 154 Posted August 17, 2018 Share Posted August 17, 2018 Hello, on every flight I made, the new A319 warns me "SPEED SPEED SPEED ..." when on final approach and when I reduced the speed to final approach speed. The approach calculation was made, all data have been inserted and the computer calculates an approach speed of 117kt. When I use this speed and even up to 125kt the warning is there. Only if I increase the speed to about 127kt, so 10kt more than calculated, the warning stops. When I fly the 117 kt the orange band on the speed display is moving into the current speed. So it seems that the calculated speed is wrong and therefore the warning is created. When flying 117kt as given, the pitch attitude is too much nose up. Does anyone have this issue too? What can I do, or is this a bug that needs to be looked at? Regards, Julian Link to comment Share on other sites More sharing options...
blahhh 41 Posted August 17, 2018 Share Posted August 17, 2018 Hi, what about the weather? I also got the low energy "speed speed" aural warning on final at vapp in windy condition, I'm prety sure that is normal and the pilot has to add manually some kts to the vapp regarding the wind. Link to comment Share on other sites More sharing options...
blahhh 41 Posted August 17, 2018 Share Posted August 17, 2018 You can use this tool to counter-check flex temp, t/o and app speed. (not yet available for the 319 cfm) http://wabpro.cz/A320/ edit: forget it, it does not consider the vapp speed. Link to comment Share on other sites More sharing options...
Meyerflyer 154 Posted August 17, 2018 Author Share Posted August 17, 2018 The weather should be no factor. Had it on all three approaches I made and the weather was quite good. I think on the first approach to runway 25 in EDDS I had a wind of 300/4kt. And I use AS4, which is quite a serious weather engine. So I agree, if the weather is bad or the wind coming from behind or so, the warning can be right, but not here in my case. Never had this with the old extended Bus. Link to comment Share on other sites More sharing options...
Meyerflyer 154 Posted August 17, 2018 Author Share Posted August 17, 2018 I think, the calculation is buggy or the range, where the SPEED warning is generated, is displaced. Aerosoft, can you check that? Link to comment Share on other sites More sharing options...
Hoffie3000 96 Posted August 17, 2018 Share Posted August 17, 2018 There is nothing to check due an approach speed of 117kias is way to llow. You should knowing this because you wrote in another thread you made more as 1000 flights with an Airbus. Normal you can count with a range,of 130 - 140kias depending of weight of course. Do you have a screenshot of the relavant MCDU page? Wolfgang Link to comment Share on other sites More sharing options...
Meyerflyer 154 Posted August 17, 2018 Author Share Posted August 17, 2018 The automated calaculation should at least be that precise, that no SPEED warning comes up. I'm always adding 1-5kt depending on wind direction and weather, but even with 122kt the warning comes. And 122kt with a low loaded A319 with only 120 pax and 1.8t of cargo should not be any faster than 120kt on final approach. Never heard before, that an A319 is landing at 130-140kt. Not even a more loaded A320 needs 140kt with wind coming from ahead... Link to comment Share on other sites More sharing options...
blahhh 41 Posted August 17, 2018 Share Posted August 17, 2018 10 minutes ago, Hoffie3000 said: There is nothing to check due an approach speed of 117kias is way to llow. You should knowing this because you wrote in another thread you made more as 1000 flights with an Airbus. Normal you can count with a range,of 130 - 140kias depending of weight of course. Do you have a screenshot of the relavant MCDU page? Wolfgang On a 320 VLS is 106-153 kts ... Link to comment Share on other sites More sharing options...
Meyerflyer 154 Posted August 17, 2018 Author Share Posted August 17, 2018 Ah, I have an idea, why the calculated speed could perhaps be wrong. Will test asap and report back. Link to comment Share on other sites More sharing options...
Meyerflyer 154 Posted August 19, 2018 Author Share Posted August 19, 2018 Okay it was perhaps my fault. I didn't enter all weight data into the MCDU. After entering the data, the correct approach speeds were generated (somewhere between 130-132kt). I had one flight, where I entered the data the absolutely same way, I did when it worked, but then I got the Vapp of 114kt again and I couldn't find out why. I will have an eye on this though. Link to comment Share on other sites More sharing options...
Hoffie3000 96 Posted August 20, 2018 Share Posted August 20, 2018 Maybe a comparison would help. The data comes from a flight EDDF-LEBB. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
mr.ocjr 3 Posted September 4, 2018 Share Posted September 4, 2018 any more thoughts on this? I also get the SPEED SPEED call out a fair amount and I want to make sure I am not doing something wrong... Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted September 5, 2018 Aerosoft Share Posted September 5, 2018 We'll have another look at it. Link to comment Share on other sites More sharing options...
Meyerflyer 154 Posted September 5, 2018 Author Share Posted September 5, 2018 Mathijs, I have to admit that I didn't have the time yet to fly the tutorial flight, but I fly and program every flight the exact same way and mostly, the bus calculates an approach speed of 114-116kt on the A319 CFM, which is way too low. When I fly this speed, the SPEED SPEED warning comes up correctly, as the Bus is flying too slow. Sometimes (like one flight yesterday) the speed seems to be right at 130-132kt. The warning then doesn't come up as expected. But the speed calculation is only right at about 1 out of 5 flights, that have, again, been programmed absolutely the same way and with a similiar approach weight. My personal opinion is, that there is an issue with the calculation of the approach speed, that seems to be inconsistend. Link to comment Share on other sites More sharing options...
MikaV 28 Posted September 18, 2018 Share Posted September 18, 2018 On 9/5/2018 at 1:10 PM, Meyerflyer said: the bus calculates an approach speed of 114-116kt on the A319 CFM, which is way too low. Very odd! I made an 22 A319 CFM flights now. Never get so lower VAPP calculations from computer? Actually 126kt is my lowest with very empty plane (from Stockholm to Helsinki) I believe. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.