Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 07/21/21 in all areas

  1. And while still in early stages (the effects etc are missing) but work on the animations is progressing very good. There will be a lot of animations and many are pretty damned complex.
    12 points
  2. Wednesday, picture day... Anne worked on more smallish detail for the interiors (there will be many different interiors of course) While Jae completed the Skydiver version, that we showed last week from the modeler tools (as said before Anne will still have to hack a hole for the special skydiver door): Overall, in the last 5 months of the project we just had to extend it with one week so it is pretty much smooth sailing.
    6 points
  3. Aerosoft and Orbx today announce a new partnership which sees both companies sharing distribution of their respective products. Winfried Diekmann, Aerosoft’s CEO, said: “A great partnership – both Aerosoft and Orbx are very well known brands in the flight simulation industry, and both care greatly about high quality and customer satisfaction. Together we can offer our respective customers a great variety of interesting products.” Anna Cicognani, Orbx’s CEO, said: “We are very excited to start this partnership with Aerosoft. Orbx has been developing high quality products for the major flight sim platforms for many years, and we are proud our two Companies - which share a lot of history - can offer flight simmers some of the best products from our respective catalogues.” About 15 products from each Company are going to be initially on offer with this distribution agreement, with more to be added to the catalogue in the near future.
    4 points
  4. Writing like this in a forum means shouting out loud and ranting. And this is something we do not like and what Crabby was referring to. Instead you could have been asking why this is not possible. The reason for this currently is that even when the panels state is being saved, when the aircraft is being loaded, during this process it is being several times initialized by the the sim, so that all "saved" values are overwritten. So it is a limitation of the sim and, at least, at the moment there is no solution.
    3 points
  5. Aerosoft und Orbx geben heute eine neue Vertriebspartnerschaft bekannt, beide Unternehmen werden ab sofort auch die Produkte des anderen vertreiben. Winfried Diekmann, CEO von Aerosoft, sagt: „Eine großartige Partnerschaft – sowohl Aerosoft als auch Orbx sind sehr bekannte Marken im Bereich Flugsimulation und stehen für hohe Qualität und Kundenzufriedenheit. Gemeinsam können wir unseren Kunden eine enorme Bandbreite an interessanten Produkten anbieten. Anna Cicognani, CEO von Orbx, sagte: „Wir freuen uns sehr, diese Partnerschaft mit Aerosoft zu beginnen. Orbx entwickelt seit vielen Jahren hochwertige Produkte für die führenden Flugsimulationsplattformen. Wir sind stolz darauf, dass unsere beiden Unternehmen, die eine lange Geschichte teilen, Fans der Flugsimulation einige der besten Produkte aus unseren jeweiligen Katalogen anbieten können.“ Zunächst sind jeweils etwa 15 Produkte beider Firmen in dieser Vertriebsvereinbarung enthalten. Weitere werden in naher Zukunft in den Katalog aufgenommen.
    2 points
  6. Just in time ! My brand new replica of CRJ throttles console are almost ready for delivery.
    2 points
  7. Dear friends, it is time to introduce you to a new Aerosoft development, Aerosoft One. It will be launched pretty soon and will change the way you install our products. Aerosoft One is a tool that makes extremely simple to install and update your Aerosoft products. It does more, we will get to that later, but the main task is to make sure the files on your system are always up to date. When you have bought a product (you can do so securely from the browser inside Aerosoft One) you do no longer have to download the installer, just go to Library, find your new product, and click install. The product will then be downloaded and installed. To check if there are new versions, click go to Update and click update. That is all you need to know. We like to keep things simple. As said, Aerosoft One does a bit more. You can quickly see our news, visit the shop, find all your serials, access our forums and support options and find the most important parts of our websites. It is called Aerosoft One because it is a one stop method of using all we have to offer! In the next few weeks we’ll share more information, show some more features and gladly answer any of your questions. Let me share some images that will show you how things actually are presented to you. Here you see all the MSFS products actually supported by Aerosoft One (at the start not everything will be included but we’ll quickly expand that! In this screen you can see what MSFS products you have already installed and can find more information on that product. Aerosoft One offers you complete freedom where to install the DLC, but will give you some very solid advise on what to avoid. On the Queue display you can see what you have downloads, what is being downloaded and what will be downloaded.
    1 point
  8. As soon as Mircosoft/Asobo will provide the needed variables to simobjects (other then Marshallers), we will provide a working VDGS as done for P3D years ago. But that data are still not available yet.
    1 point
  9. I know I'm in a minority, but I need to say it: Cinematic prop animations are like lens flares. They indicate that you're not really there, but watching something recorded by a camera. You might not have noticed, but your brain did. Some day, we'll get spinning props without the wagon wheel effect. But I guess the Twotter release date won't be that day.
    1 point
  10. Für mich ist dies die positivste Nachricht der letzten Jahre, natürlich neben den Nachricht, dass Microsoft/Asobo an einem neuen Flugsimulator arbeiten. Ich wünsche beiden Unternehmen sehr viel Erfolg 🙂
    1 point
  11. We do have several people who commented on this, but we had some from the release. And almost always when we asked them to clear ALL key and axis assignments and make new assignments the issue went away. Of course, if you have too much energy, have your nose pointed down and extend the flaps, physics will take over, flaps add lift and in the CRJ have a nose up effect.
    1 point
  12. Dann wende doch bitte direkt an Microsoft in deren Forum: https://forums.flightsimulator.com/ oder https://flightsimulator.zendesk.com/hc/en-us
    1 point
  13. I have the same problem as "TWOTTER". I find the response to his problem in-adequate. What are you referring to as a mixed control response? I have now attempted several ILS approcahes and the autopilot has not held any of them on centerline or glideslope. Something needs to be "tweaked" Does anyone else have this problem? What about the "Dude" his video tutorials are excellent, perhaps he has a comment. PS I love the airplane otherwise
    1 point
  14. At flightsim.to there is a small tool that claims to do this, but we have no experience with it. As Otto wrote, we do save and load the data but the sim at this moment overwrites it. This issue is discussed with Asobo and we are sure it will be fixed in some way at some time. But writing "Aerosoft fix it!" without knowing about the issue, could indeed be seen as not very polite, hence the comments about that. We would have given you a reasonable answer even if you would have just asked about the issue.
    1 point
  15. Tritt das Problem nur bei Verwendung eines speziellen Addons, z.B. Flugzeug oder Szenerie, auf oder generell auch mit den Standardflugzeugen und Szenerien?
    1 point
  16. That really sounds like mixed control assignments. We have seen this a lot.
    1 point
  17. I am not, however I do not intercept the GS with flaps fully deployed, which your post seems to allude you do. Just before intercept I am normally flying at about 180 knots with flaps 20. When the GS is about to intercept, I select gear down and flaps 30, this slows the aircraft to begin descending on the GS. Once established and about 2-3 miles out, I go full flaps and stabilize on Vref+5 (or whatever I need to add to Vref for wind). Once I have the runway environment I select AP off and fly by hand. If I hit minimums I go around.
    1 point
  18. Sorry, not possible as we use real databases.
    1 point
  19. 1 point
  20. wondering the same, I will hold off on getting for 900/1000 for now, hopefully they fix these issues. The advisory VNAV is also really wonky (incorrect) sometimes.
    1 point
  21. The modelling on this aircraft continues to amaze me!
    1 point
  22. The 550/700 cannot be saved so as to start in exactly the same configuration you left it. You only have the pre-assigned options such as cold and dark, etc.
    1 point
  23. Thanks for that. Would you be so kind as to keep us informed about your experience? I'll offer a free 900/100 in exchange.
    1 point
  24. Will the product also support Aerosoft software that has been purchased via third parties? Cheers, Herman
    1 point
  25. Version 1.0.0

    274 downloads

    Recommend use with AIRAC 2107 for best results. Updates for RAD Restrictions and Directs are cumulative. Changelog Update: Route and Altitude/FL Restrictions Update: RouteCharges (July 2021) Best regards David
    1 point
  26. You must be such a pleasant person to be around...
    1 point
  27. "Aerosoft fix it!" What kind of culture were you raised in? Just because you sit behind a keyboard does not mean that you can act like a kid in the cereal aisle. If you truly want to learn something, make the time to do it just like you would anything else. Would you like someone from Aerosoft to come out to your house and make sure you finish your CRJ lessons?
    0 points
  28. To make sure we can focus on the open issues we close topics when we feel the issue of the topic starter is either fixed or explained. This make sure we do not loose track of people who posted something that is still open. Now if you added something to that post that is exactly the same issue it is most likely also 'resolved or explained' at that point. If you posted something in that thread that is NOT about what the topic starter was on about it could be your specific issue is not solved. That is why it is so important NOT to go offtopic. Your issue gets lost that way.
    -1 points
  29. I come into this forum every day. I see a lot of things reported as issues with the CRJ. 99% of the reports are utter crap and caused by people who can't read a manual. The majority of the rest are sim related and could be fixed and or understood as a sim issue by doing something miraculous. It goes by many names. Google and Bing are probably the two most used. Here is how it works. Let's say you seek an answer or solution to a problem. You just go to www.google.com and in the little blank bar, type in your question. After a few seconds you will see possible solutions presented to you! It is freaking awesome! Let's say you and a buddy are talking and he says "Gee, I wonder how far the moon is from the earth?" If you type in "how far is the moon from the earth", without the quotes, you will get an ANSWER. Then you can tell your buddy what the answer is and he will think you are a genius! Over the years, I have found it works for almost anything from a recipe to figuring out how much powder to load in to a S&W 40 Cal case for a 180 grain bullet. It will even give you directions to places! It is amazing. Apparently Google connects ups to something called the World Wide Web, invented by a guy named Al Gore (at least according to him). On the world wide web, at least a couple of hundred people (or so it seems) put up answers to stuff. I just searched for best Italian Restaurant near me and got 5 different options! My wife thinks I am an immortal genius. People are amazed by how much stuff I know. They don't realize it's the Google thing. I guess it is some type of secret, probably protected by the Illuminati. Hope they don't find out I cracked their code. The used to say that ignorance is bliss, when in actuality it is not. In reality, if you have an opportunity to solve your ignorance and don't, well that is called stupid. No one wants to be ignorant, much less stupid. Now I know some of you are going to be upset that I discovered this top secret stash of nearly unlimited knowledge. The good thing is if you go to google and search "Caution tape and teddy bears" you will be able to create your own little safe zone free from the mean people. In the mean time, I will fly another 4-6 hours on the CRJ, with zero issues that I can't control and have fun!
    -1 points
  30. Pleaser use the support sections of the forum for this.
    -1 points


  • Newsletter

    Want to keep up to date with all our latest news and information?
    Sign Up
×
×
  • Create New...