Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 10/18/20 in all areas

  1. Version 1.0.0

    466 downloads

    Recommend use with AIRAC 2011 for best result. Updates for RAD Restrictions and Directs are cumulative. Changelog Update: Route and Altitude/FL Restrictions Update: RouteCharges (Oct 2020) Update: Sub-Routes.txt Best regards David
    3 points
  2. Ist korrigiert: +53+010.dsf gehört nach simHeaven_X-Europe-1-vfr\Earth nav data\+50+010 Danke für deine Mitarbeit!
    2 points
  3. Version 1.0

    2861 downloads

    Coats Land and Queen Maud Land, Antarctica. Antarctica4XPlane - Part III The Antarctic Adventure continous! I am proud to present Part III of my Antarctica Mesh Scenery Antarctica4XPlane. It covers Coats Land and the western parts of Queen Maud Land, down to -81 degrees. Suitable add-ons as well as more regions will follow in the future: I recommend you to follow the development blog to stay up to date. Creating a Antarctica Mesh Scenery is a quite difficult and time-consuming task. That's due to missing or not accurate data in the public domain. Many parts of this mesh scenery were modeled by hand, and a lot of passion went into this project. However, this ambitious freeware project cannot keep alive without support. Thus, if you like the Antarctica4XPlane project and want to support the further development, then please visit the project's support-site and support the further development. Installation is simple: Unarchive the downloaded file and place the folder Antarctica4XPlane_3v1 into your Custom Scenery directory and add the following line near the bottom (below the research base sceneries) of your scenery_packs.ini: SCENERY_PACK Custom Scenery/Antarctica4XPlane_3v1/ I strongly recommend to switch on "runways follow terrain contours" and if you're already using X-Plane 11 then I recommend you my Antarctic Maps because X-Plane's default map doesn't cover the Antarctic Continent. To start your Antarctica Adventure with Antarctica4XPlane I suggest the Research Base Station Sceneries available on the project's website. First Sceneries are already available and hopefully many more will follow. Please note: For this Part 3 doesn't exist so far any custom sceneries. Because of that, I attach an apt.dat (unzip the archive and move the apt.dat into Custom Scenery/Antarctica4XPlane_3v1/Earth nav data/) with some skiways and helipads: EGAH (Halley Research Station), SAYB (Belgrano II Base), AT16 (Neumayer-Station III), DRE1 (Drescher Ice Camp), ABA1 (Aboa Research Station), WSA1 (Wasa Research Station), SVE1 (Svea Research Station), AT12 (Kohnen Station), AT22 (SANAE IV Research Base), AT27 (Troll Research Station) and TOR1 (Tor Research Station). Antarctica4XPlane comes exclusively for X-Plane, for free and personal use only, but without guarantee and warranty. Antarctica4XPlane is intended for flight simulation only and shall not be used for real life navigation or any other real life purposes. You are not allowed to modify, reverse-engineer or redistribute this scenery or to use any part of it in your own sceneries. Please contact me, if you have questions regarding the license or if you are interested in a cooperation or commercial applications. HAVE FUN. Thanks to The National Snow and Ice Data Center (NSIDC) for digital elevation models The Japan Aerospace Exploration Agency (JAXA) for digital elevation models OpenStreetMap Contributors for their mapping work on the antarctic continent Nino for the initial ignition of the project, dozens of ideas and his support All contributors and supporters who ensure that the development continues Laminar Research for X-Plane and the permission to use their textures apt.dat.zip
    1 point
  4. Sooo..... einfach kann die Welt sein....... man.........oh man, hab ich die Scheuklappen aufgehabt. ich war so dicht dran und denke , ich muß den Wegpunkt löschen. Geht aber nicht. Der wird überschrieben... !!! Man, danke Ron. Danke nochmal, dass du nicht nur gelesen, sondern auch gehandelt ( nachgeflogen ) hast. Toll !
    1 point
  5. Das ist auch nicht erforderlich. Du musst den NEUEN Wegepunkt AKTIVIEREN. Also: In der Legs Page NATOR ins Scratch-Pad schaufeln da LUGUS nicht "übersprungen" wurde, steht der nun an erster Stelle. Genau DAHIN dann Links1 klicken Das muss mit Exec bestätigt werden Fertig Ja, Du schreibst, der Left-turn wurde "zu spät" eingeleitet. Das ist falsch, siehe mein Screenshot.
    1 point
  6. If anyone can bring valid data. Technical structures/drawings, measurement results from wing stress tests, we will of course adapt it. Even photos/videos with all required infos for loadfactor on the wing, AoA, GW, Wind...at the time the photo was done, we will check it. All other is just it could be, in my opinion, maybe...nothing we can work with. Sorry, but that is the truth.
    1 point
  7. Wer mag, ich bräuchte noch ein paar Testpiloten, die noch heute oder morgen im Laufe des Tages mein Testgebiet (von +43+006 bis +54+022, nur OSM-only-Kacheln) probefliegen, am besten da wo ihr euch auskennt, und hier oder per E-Mail an mich kurz Bescheid geben. Die großen Änderungen, die ich oben beschrieb, verschiebe ich auf v5.3, da sind noch einige Sachen, die sich unangenehm bemerkbar machen. Doch ein paar kleinere Dinge habe ich schon umgesetzt und bevor ich den großen Rest von Europa erzeuge, möchte ich sicher sein, dass sich die Arbeit rentiert und ich nicht große Fehler irgendwo reinbrachte (was ich nicht glaube, das was Peter und ich selbst anguckte war supergut 😇) Ich habe die Datei Update Beta auf dem Server aktualisiert, die OSM-Daten sind von heute morgen, also Stand gestern Abend 22 Uhr. @Pitt153 hatte gestern noch die übergroßen Gebäude berichtigt, die immer entstehen, wenn ele und height verwechselt werden. Außerdem sind noch 2 schöne Rundkirchen auf Bornholm, die Diego spendierte, reingekommen, es sind nun 278 neue VFR-Objekte drin (Danke an @Pitt153 für seine unermüdliche Arbeit). In 5.3 kommen noch mehr Sehenswürdigkeiten wie der Kreml in Moskau rein. Was noch im Update Beta fehlt sind die farms Fassaden, das mach ich wenn während die Erzeugung läuft, doch zu 99% isses fertig ( und bis auf die fehlenden Kacheln im Layer 4-scenery). Zur Installation am besten Layer 1, 2, 3 und 7 löschen, dann alles aus diesem Archiv reinkopieren X-Europe_5.2_Update_Beta.7z (4 GB)
    1 point
  8. Version 4.0

    4100 downloads

    Victoria Land and Transantarctic Mountains, Antarctica. Antarctica4XPlane - Part II I am proud to present Part II of my Antarctica Mesh Scenery Antarctica4XPlane. This second part covers the Victoria Land and the northern parts of the Transantarctic Mountains down to -81 degrees. More regions will follow in the future: I recommend you to follow the development blog to stay up to date. Antarctica4XPlane is close to its 4th anniversary. Years of joy, but also hard work on this challenging Antarctica Mesh Scenery. I'd like to continue the Antarctica4XPlane project to present further parts of the coldest and driest continent on our earth. However, that isn't possible without support. Thus, if you like the Antarctica4XPlane project and want to support the further development, then please visit the project's support-site and support the further development. Installation is simple: Unarchive the downloaded file and place the folder Antarctica4XPlane_2v4 into your Custom Scenery directory and add the following line near the bottom (below the research base sceneries) of your scenery_packs.ini: SCENERY_PACK Custom Scenery/Antarctica4XPlane_2v4/ Caution: If you are upgrading from an earlier version of Part II, then delete the directory of the old version before you start your simulator. I strongly recommend to switch on "runways follow terrain contours" and if you're already using X-Plane 11 then I recommend you my Antarctic Maps because X-Plane's default map doesn't cover the Antarctic Continent. To start your Antarctica Adventure with Antarctica4XPlane I suggest the Research Base Station Sceneries available on the project's website. First Sceneries are already available and hopefully many more will follow. Antarctica4XPlane comes exclusively for X-Plane, for free and personal use only, but without guarantee and warranty. Antarctica4XPlane is intended for flight simulation only and shall not be used for real life navigation or any other real life purposes. You are not allowed to modify, reverse-engineer or redistribute this scenery or to use any part of it in your own sceneries. Please contact me, if you have questions regarding the license or if you are interested in a cooperation or commercial applications. HAVE FUN. Thanks to The National Snow and Ice Data Center (NSIDC) for digital elevation models The Japan Aerospace Exploration Agency (JAXA) for digital elevation models The Land Information New Zealand (LINZ) for relief data resp. contour lines OpenStreetMap Contributors for their mapping work on the antarctic continent The Scientific Committee on Antarctic Research (SCAR) for additional vector data Nino for the initial ignition of the project, dozens of ideas and his support All contributors and supporters who ensure that the development continues Laminar Research for X-Plane and the permission to use their textures
    1 point
  9. Version 4.0

    6319 downloads

    South Orkney Islands and Antarctic Peninsula, Antarctica. Antarctica4XPlane - Part I I am proud to present Part I of my Antarctica Mesh Scenery Antarctica4XPlane. This first part of my mesh scenery covers the South Orkney Islands and the Antarctic Peninsula down to -76 degrees. More regions will follow in the future: I recommend you to follow the development blog to stay up to date. Antarctica4XPlane is close to its 4th anniversary. Years of joy, but also hard work on this challenging Antarctica Mesh Scenery. I'd like to continue the Antarctica4XPlane project to present further parts of the coldest and driest continent on our earth. However, that isn't possible without support. Thus, if you like the Antarctica4XPlane project and want to support the further development, then please visit the project's support-site and support the further development. Installation is simple: Unarchive the downloaded file and place the folder Antarctica4XPlane_1v4 into your Custom Scenery directory and add the following line near the bottom (below the research base sceneries) of your scenery_packs.ini: SCENERY_PACK Custom Scenery/Antarctica4XPlane_1v4/ Caution: If you are upgrading from an earlier version of Part I, then delete the directory of the old version before you start your simulator. I strongly recommend to switch on "runways follow terrain contours" and if you're already using X-Plane 11 then I recommend you my Antarctic Maps because X-Plane's default map doesn't cover the Antarctic Continent. To start your Antarctica Adventure with Antarctica4XPlane I suggest the Research Base Station Sceneries available on the project's website. First Sceneries are already available and hopefully many more will follow. Antarctica4XPlane comes exclusively for X-Plane, for free and personal use only, but without guarantee and warranty. Antarctica4XPlane is intended for flight simulation only and shall not be used for real life navigation or any other real life purposes. You are not allowed to modify, reverse-engineer or redistribute this scenery or to use any part of it in your own sceneries. Please contact me, if you have questions regarding the license or if you are interested in a cooperation or commercial applications. HAVE FUN. Thanks to The National Snow and Ice Data Center (NSIDC) for digital elevation models The Japan Aerospace Exploration Agency (JAXA) for digital elevation models OpenStreetMap Contributors for their mapping work on the antarctic continent The Scientific Committee on Antarctic Research (SCAR) for additional vector data Nino for the initial ignition of the project, dozens of ideas and his support All contributors and supporters who ensure that the development continues Laminar Research for X-Plane and the permission to use their textures
    1 point
  10. Most likely never. The developer I.D.S. is gone. Here is a screenshot of KSMF in v5. I reworked the groundpoly (SCASM to v4.4) so it should maybe work in P3Dv4 (but I compiled the other files with v5). Adde the v5 exclude patch from iniBuilds and their DL patch. https://www.inibuilds.com/p3d-v5-scenery-compatibility-files https://www.inibuilds.com/dynamic-lighting In ORBX disable the KSMF files, replace in folder "SMF_LC\Scenery" CVX_PROJECT.BGL by KSMF_ADEP5_Bob_CVX.bgl, replace in folder "Sacramento International Airport\Scenery" SMF_GP_MARKINGS.BGL SMF_GP_SUR_P1.BGL SMF_GP_SUR_P2.BGL by KSMF_ground_v44.BGL, and add this file to "Scenery/World/Scenery": KSMF_ADEP5_Bob_ALT.bgl
    1 point
  11. Always about 20 to 25nm.awa6 from airport. Mathijs suggestion to disable mesh is not going to happen. No other 3rd party airports in Europe have this problem. I have a bunch from numerous dev's installed all without issue including other Aerosoft airports. This bug is with LSGG, not my system. I'm uninstalling it. Waste of money.
    1 point
×
×
  • Create New...