twowolves 12 Posted October 5, 2013 Author Share Posted October 5, 2013 Hello.Denis.I added nav lights.But left out the shockwave beacon it didn't look as good as the stock beacon. [LIGHTS] light.0 = 10, 8.1, 0.60, -0.60, fx_twotter_vclight , light.1 = 7, 9.5, 0.0, -0.90, fx_twotter_vclightred , light.2 = 3, -00.2, -32.70, 00.96, fx_shockwave_navred, light.3 = 3, -00.2, 32.78, 00.93, fx_shockwave_navgre, light.4 = 2, -00.0, -32.6, 00.80, fx_shockwave_strobe_2, light.5 = 2, -00.0, 32.6, 00.80, fx_shockwave_strobe_3, light.6 = 5, 02.5, -11.6, -00.10, fx_shockwave_landing_light_narrow_no_flare //shockwave light light.7 = 5, 02.5, 11.6, -00.10, fx_shockwave_landing_light_narrow_no_flare //shockwave light light.8 = 6, 13.3, -00.7, -07.19, fx_shockwave_landing_light_narrow_down_22 //shockwave light Two Wolves Link to comment Share on other sites More sharing options...
obie311 20 Posted October 6, 2013 Share Posted October 6, 2013 Where to add, can you share in detail B.Regard's Sukhdeep Singh Apologies for the late reply. Family responsibilities have been intense lately. Open your panel.cfg file and find the following entry: [WindowXX] size_mm= 450, 450 window_size=0.14 windowsize_ratio=0.55 window_pos= 0.005,0.81 BACKGROUND_COLOR=0,0,0 VISIBLE=1 sizeable=1 ident=23456Type=SPECIAL gauge00=TW_Chk!Panel_sel, 0, 0, 450, 420 Best Regards, Obie Link to comment Share on other sites More sharing options...
Guest Posted October 6, 2013 Share Posted October 6, 2013 Hello.Denis.I added nav lights.But left out the shockwave beacon it didn't look as good as the stock beacon. [LIGHTS] light.0 = 10, 8.1, 0.60, -0.60, fx_twotter_vclight , light.1 = 7, 9.5, 0.0, -0.90, fx_twotter_vclightred , light.2 = 3, -00.2, -32.70, 00.96, fx_shockwave_navred, light.3 = 3, -00.2, 32.78, 00.93, fx_shockwave_navgre, light.4 = 2, -00.0, -32.6, 00.80, fx_shockwave_strobe_2, light.5 = 2, -00.0, 32.6, 00.80, fx_shockwave_strobe_3, light.6 = 5, 02.5, -11.6, -00.10, fx_shockwave_landing_light_narrow_no_flare //shockwave light light.7 = 5, 02.5, 11.6, -00.10, fx_shockwave_landing_light_narrow_no_flare //shockwave light light.8 = 6, 13.3, -00.7, -07.19, fx_shockwave_landing_light_narrow_down_22 //shockwave light Two Wolves Thanks a lot for your work! But I can't believe the original beacon looks better than that one from A2A. Have you tried several beacon effects out of the A2A package? Could you send me the position oft the beacon light? So I could try myself. Thanks and see you soon Denis Link to comment Share on other sites More sharing options...
Guest Posted October 14, 2013 Share Posted October 14, 2013 I did a workaround and now the A2A beacon is included. I also included a second beacon inside the hull so the beacon lights are visible inside the cockpit giving a very nice touch. But it's unrealistic. So if you don't want the beacon light shine inside the cockpit leave the last line: [LIGHTS] light.0 = 10, 8.1, 0.60, -0.60, fx_twotter_vclight , light.1 = 7, 9.5, 0.0, -0.90, fx_twotter_vclightred , light.2 = 3, -00.2, -32.70, 00.96, fx_shockwave_navred, light.3 = 3, -00.2, 32.78, 00.93, fx_shockwave_navgre, light.4 = 2, -00.0, -32.6, 00.80, fx_shockwave_strobe_2, light.5 = 2, -00.0, 32.6, 00.80, fx_shockwave_strobe_3, light.6 = 5, 02.5, -11.6, -00.10, fx_shockwave_landing_light_narrow_no_flare //shockwave light light.7 = 5, 02.5, 11.6, -00.10, fx_shockwave_landing_light_narrow_no_flare //shockwave light light.8 = 6, 13.3, -00.7, -07.19, fx_shockwave_landing_light_narrow_down_22 //shockwave light light.9 = 1, -28.3, 0, 9.6, fx_shockwave_beacon light.10 = 1, 0, 0, -2, fx_shockwave_beacon Link to comment Share on other sites More sharing options...
Sukhdeep Singh 5 Posted October 16, 2013 Share Posted October 16, 2013 Apologies for the late reply. Family responsibilities have been intense lately. Open your panel.cfg file and find the following entry: [WindowXX] size_mm= 450, 450 window_size=0.14 windowsize_ratio=0.55 window_pos= 0.005,0.81 BACKGROUND_COLOR=0,0,0 VISIBLE=1 sizeable=1 ident=23456Type=SPECIAL gauge00=TW_Chk!Panel_sel, 0, 0, 450, 420 Best Regards, Obie Thanks Obie, for your reply Link to comment Share on other sites More sharing options...
Aditya Shah 0 Posted November 23, 2013 Share Posted November 23, 2013 Hello.Denis.I added nav lights.But left out the shockwave beacon it didn't look as good as the stock beacon. [LIGHTS] light.0 = 10, 8.1, 0.60, -0.60, fx_twotter_vclight , light.1 = 7, 9.5, 0.0, -0.90, fx_twotter_vclightred , light.2 = 3, -00.2, -32.70, 00.96, fx_shockwave_navred, light.3 = 3, -00.2, 32.78, 00.93, fx_shockwave_navgre, light.4 = 2, -00.0, -32.6, 00.80, fx_shockwave_strobe_2, light.5 = 2, -00.0, 32.6, 00.80, fx_shockwave_strobe_3, light.6 = 5, 02.5, -11.6, -00.10, fx_shockwave_landing_light_narrow_no_flare //shockwave light light.7 = 5, 02.5, 11.6, -00.10, fx_shockwave_landing_light_narrow_no_flare //shockwave light light.8 = 6, 13.3, -00.7, -07.19, fx_shockwave_landing_light_narrow_down_22 //shockwave light Two Wolves Thanks Two Wolves, for working on T.O.E. Shockwave lighting. I just wanted to know the above parameters are for all the models. I mean you have worked for wheel, tundra & floater - 300. Can we use for Amphibian - 300 & all the 100 models. Link to comment Share on other sites More sharing options...
twowolves 12 Posted November 23, 2013 Author Share Posted November 23, 2013 Hi. My friend the lights with 8 lines are for the 300 and 100 wheels. Now for the floats 300 and 100 just delete line 8 which is your taxie light you don't have a taxie lights on your floats 100 and 300. I'm glade you like the shockwave lights enjoy. two Wolves Link to comment Share on other sites More sharing options...
Aditya Shah 0 Posted November 23, 2013 Share Posted November 23, 2013 Thanks Twowolves, i appreciate your fast reply. Link to comment Share on other sites More sharing options...
marvic 183 Posted November 23, 2013 Share Posted November 23, 2013 Am I missing something, this is all I have for lights. does that mean they are now part of the model? [LIGHTS] light.0 = 10, 8.1, 0.60, -0.60, fx_twotter_vclight , light.1 = 7, 9.5, 0.0, -0.90, fx_twotter_vclightred , Link to comment Share on other sites More sharing options...
BTenhaaf 6 Posted November 25, 2013 Share Posted November 25, 2013 These two are part of the model - the other 6 lights can only be installed by yourself when you have boght ShockwaveLights from A2A (payware) Link to comment Share on other sites More sharing options...
marvic 183 Posted November 25, 2013 Share Posted November 25, 2013 These two are part of the model - the other 6 lights can only be installed by yourself when you have boght ShockwaveLights from A2A (payware) I have shockwave lights. As you can see, there is no light section for any other lights except the ones I posted above. I am no programmer, but it sure appears that the lights are part of the model. I was using shockwave previous to version 1.10 with above config. from Two Wolves. So my question is , where so I put the reference to Shockwave? Please be specific. [ELECTRICAL] max_battery_voltage = 28.0 generator_alternator_voltage = 29.0 max_generator_alternator_amps = 400.0 electric_always_available = 0 autopilot = 0, 0, 1 avionics_bus = 0, 0, 1 avionics = 0, 0, 1 pitot_heat = 0, 0, 1 additional_system = 0, 0, 1 marker_beacon = 0, 0, 1 gear_warning = 0, 0, 1 fuel_pump = 0, 0, 1 starter1 = 0, 0, 1 starter2 = 0, 0, 1 starter3 = 0, 0, 1 starter4 = 0, 0, 1 light_nav = 0, 0, 1 light_beacon = 0, 0, 1 light_landing = 0, 0, 1 light_taxi = 0, 0, 1 light_strobe = 0, 0, 1 light_panel = 0, 0, 1 auto_brakes = 0, 0, 1 hydraulic_pump = 0, 0, 1 fuel_transfer_pump = 0, 0, 1 light_recognition = 0, 0, 1 light_wing = 0, 0, 1 light_logo = 0, 0, 1 light_cabin = 0, 0, 1 Link to comment Share on other sites More sharing options...
bigsky10 4 Posted January 1, 2014 Share Posted January 1, 2014 Tundra with Beacon: [LIGHTS] light.0 = 10, 8.1, 0.60, -0.60, fx_twotter_vclight , light.1 = 7, 9.5, 0.0, -0.90, fx_twotter_vclightred , light.2 = 3, 10, 8.1, 0.60, -0.60, fx_shockwave_navred, light.3 = 3, 7, 9.5, 0.0, -0.90, fx_shockwave_navgre, light.4 = 2, -00.0, -32.6, 00.80, fx_shockwave_strobe_2, light.5 = 2, -00.0, 32.6, 00.80, fx_shockwave_strobe_3, light.6 = 5, 02.5, -11.6, -00.10, fx_shockwave_landing_light_narrow_no_flare //shockwave light light.7 = 5, 02.5, 11.6, -00.10, fx_shockwave_landing_light_narrow_no_flare //shockwave light light.8 = 6, 13.3, -00.7, -07.19, fx_shockwave_landing_light_narrow_down_22 //shockwave light light.9 = 1, -28.3, 0, 9.6, fx_shockwave_beacon 300 Wheel with beacon: [LIGHTS] light.0 = 10, 8.1, 0.60, -0.60, fx_twotter_vclight , light.1 = 7, 9.5, 0.0, -0.90, fx_twotter_vclightred , light.2 = 3, 10, 8.1, 0.60, -0.60, fx_shockwave_navred, light.3 = 3, 7, 9.5, 0.0, -0.90, fx_shockwave_navgre, light.4 = 2, -00.0, -32.6, 00.80, fx_shockwave_strobe_2, light.5 = 2, -00.0, 32.6, 00.80, fx_shockwave_strobe_3, light.6 = 5, 02.5, -11.6, -00.10, fx_shockwave_landing_light_narrow_no_flare //shockwave light light.7 = 5, 02.5, 11.6, -00.10, fx_shockwave_landing_light_narrow_no_flare //shockwave light light.8 = 6, 13.3, -00.7, -07.19, fx_shockwave_landing_light_narrow_down_22 //shockwave light light.9 = 1, -28.3, 0, 9.6, fx_shockwave_beacon This will work on the 100 too Link to comment Share on other sites More sharing options...
Louis8m 1 Posted January 19, 2014 Share Posted January 19, 2014 I put this one in bigsky but the landing lights , I'm not sure if they work is the landing lights cause they are not near as bright as the Duke that they redone and the defaults aircrafts with the shockwave lights but the wing beacon and the rest are unreal .Is this normal , cause I'm not sure - I stuck a file in the Skymaster also and it's the same. Link to comment Share on other sites More sharing options...
Louis8m 1 Posted January 23, 2014 Share Posted January 23, 2014 I think I was expecting too much and they do most likely work its just that when I bought the new redone Duke the landing light 's just beautiful and bright Link to comment Share on other sites More sharing options...
bigsky10 4 Posted January 24, 2014 Share Posted January 24, 2014 Louis8m, I know twowolfs lights work good. I took them and just chnged a few things that I liked. Works good for me, the best part is you can tweak them for yourself. I did changes some of the C337 values in the landing lights to make them more realisting. I think it is the resolution on your screen. I took the values from the A2A site and worked them around to fit me screen resolution. Sorry didn't work for you Link to comment Share on other sites More sharing options...
GermanRegionalPilot 68 Posted February 25, 2014 Share Posted February 25, 2014 Thanks very much, they work fine and are great! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.