jcagle 180 Posted December 7, 2014 Share Posted December 7, 2014 There have been a handful of issues that look like they may be related to be related to the throttle calibration. So here is a guide for all those using the PAID version of FSUIPC for throttle management. 0) Once assigned, go to the "Joystick Calibration" tab, and then go to page 1 of 11 for a single axis throttle or 3 of 11 for a multi-axis throttle 1) The GREEN box in Figure 1 is the output to the simulator. At IDLE it should read 0 and a MAX it should read 16384. 2) To test, you should cycle your throttle from IDLE to MAX 3-5 times and make sure that these values are reached every time. If not, then you probably need to re-calibrate the hardware axis 3) To re-calibrate, pull your throttle to idle, then move it forward 1/4" - 1/2" (6-12mm) until you see value in the RED box (Figure 2) increase by 200-300 points. Press SET so the values in the RED and BLUE box match. 4) Push the throttle to MAX, and then retract by 1/4" - 1/2" (6-12mm) until you see value in the RED box (Figure 3) decrease by 200-300 points. Press SET so the values in the RED and BROWN box 5) Cycle the throttle between IDLE and MAX 3-5 times. Check the GREEN box in Figure 1 and make sure that every time you pull the throttle IDLE = 0 and MAX = 16384 Link to comment Share on other sites More sharing options...
navyao 3 Posted December 8, 2014 Share Posted December 8, 2014 I have the Thrustmaster Warthog and Saitek combat rudder and have never used FSUIPC, I've always used Target GUI. Do I have to use FSUIPC or is there another list of keyboard key assignments for weapons, etc.? Thanks in advance for your reply. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted December 8, 2014 Aerosoft Share Posted December 8, 2014 I have the Thrustmaster Warthog and Saitek combat rudder and have never used FSUIPC, I've always used Target GUI. Do I have to use FSUIPC or is there another list of keyboard key assignments for weapons, etc.? Thanks in advance for your reply. If you are serious about sims and have tacpack you should consider FSUIPC, otherwise please do not. Link to comment Share on other sites More sharing options...
navyao 3 Posted December 8, 2014 Share Posted December 8, 2014 Seeing as I spent the money on the Thrustmaster Warthog, Saitek Combat rudder, TacPack and your product, I'd say I'm pretty serious about flight sims. I've been flying computer flight sims since Fleet Defender ws released in the mid-1990's, unfortunately I'm not very computer savy and FSUIPC looks a tad intimidating. But, I'll give it a shot sir! Link to comment Share on other sites More sharing options...
evvatc 12 Posted December 9, 2014 Share Posted December 9, 2014 Seeing as I spent the money on the Thrustmaster Warthog, Saitek Combat rudder, TacPack and your product, I'd say I'm pretty serious about flight sims. I've been flying computer flight sims since Fleet Defender ws released in the mid-1990's, unfortunately I'm not very computer savy and FSUIPC looks a tad intimidating. But, I'll give it a shot sir! navyao, Fleet Defender will always be one of my favorites! FSUIPC may look intimidating but once you install it and see how easy it is to use, you'll wonder why you didn't get it sooner. Link to comment Share on other sites More sharing options...
Sinesio 21 Posted December 9, 2014 Share Posted December 9, 2014 Hi, Once it is understood the use of FSUIPC, even if basically, it is impossible not to use it more! Cheers, Link to comment Share on other sites More sharing options...
navyao 3 Posted December 9, 2014 Share Posted December 9, 2014 Roger that guys, thanks. Today is the day then, I'll get it downloaded. Link to comment Share on other sites More sharing options...
Sabot 1 Posted December 15, 2014 Share Posted December 15, 2014 Quick noob question. When I disable the joystick in FSX in order to use the sticks and key assignments in FSUIPC for the Tomcat, I'm assuming that I need to re-check the box to use the sticks for any other bird that I fly, until I calibrate the "Common Key settings" (lights etc) in FSUIPC for all aircraft. Is that a true statement? Link to comment Share on other sites More sharing options...
jcagle 180 Posted December 15, 2014 Author Share Posted December 15, 2014 Yup, that's correct Link to comment Share on other sites More sharing options...
signmanbob 18 Posted December 26, 2014 Share Posted December 26, 2014 I have two throttles set and I use registered FSUIPC to set my throttles (which I have used for years) and set them according to your instructions above, yet my throttles in the F14 are stuck on idle. I checked all of my axis to be sure there was not duplicate axis set to throttles and I made sure that FS control axis are disabled, yet my throttles are still stuck at idle. They will move when I move my throttles, yet they bounce back to idle like they are held by rubber bands. I would appreciate your help. I can't use the sim at all like this. Thank you, Bob Link to comment Share on other sites More sharing options...
navyao 3 Posted January 7, 2015 Share Posted January 7, 2015 Regarding tactical functions like weapons, radar, etc. are the key commands in TAC Pack the same key commands currently being used for the F-14? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.