João Peralta 8 Posted September 6, 2016 Share Posted September 6, 2016 1 hour ago, OPabst said: Sorry, I don't know way it happens and when it happens, but a old buggy file find his way back into the installer Until we fixed it there, please unpack the attached file to the <FSX>\Aerosoft\AES\SCENERY Folder, then the jetways are back an AES working in LEMG Fix LEMG for 243a.zip The Problem is, that the issue is not happen, when Simwings Ibiza Evo is activ in Scenery Lib. Installer is now fix too ! Thank Wonder all ok Link to comment Share on other sites More sharing options...
Ad 45 Posted September 6, 2016 Share Posted September 6, 2016 Oliver, Many thanks for your fast reaction and solution of the problem. Ad Link to comment Share on other sites More sharing options...
Peter Lund 7 Posted September 6, 2016 Share Posted September 6, 2016 10 hours ago, OPabst said: Sorry, I don't know way it happens and when it happens, but a old buggy file find his way back into the installer Until we fixed it there, please unpack the attached file to the <FSX>\Aerosoft\AES\SCENERY Folder, then the jetways are back an AES working in LEMG Fix LEMG for 243a.zip The Problem is, that the issue is not happen, when Simwings Ibiza Evo is activ in Scenery Lib. Installer is now fix too ! Thanks Oliver, that solved the problems I had. I now got jetbridges as well. Link to comment Share on other sites More sharing options...
Tobias1978 2 Posted September 8, 2016 Share Posted September 8, 2016 Why is the Samos-Scenery from Aerosoft / 29Palms not inculded in the 2.43a? Link to comment Share on other sites More sharing options...
Swisspilot 235 Posted September 11, 2016 Share Posted September 11, 2016 Hi According to the full list of supported Airports, ORBI (Baghdad) is also supported by AES. That was a reason for me to buy the scenery. Now I couldn't activate it and I saw on the release note list, that only FS9 version is supported. This is very confusing and for me a bit frustrating. Will ORBI also follow for FSX? Otherwise you have to change it on the "full list". Regards Patrick Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted September 12, 2016 Author Developer Share Posted September 12, 2016 vor 14 Stunden , Swisspilot sagte: Hi According to the full list of supported Airports, ORBI (Baghdad) is also supported by AES. That was a reason for me to buy the scenery. Now I couldn't activate it and I saw on the release note list, that only FS9 version is supported. This is very confusing and for me a bit frustrating. Will ORBI also follow for FSX? Otherwise you have to change it on the "full list". Regards Patrick The full List is correct, only the NEW is missing in the Releasenote list. Have changed it in the first post, the releasenote will be changed asap. ORBI is support for both FS Link to comment Share on other sites More sharing options...
Swisspilot 235 Posted September 12, 2016 Share Posted September 12, 2016 Ok perfect will check it later. Couldn't get activate yesterday but I'll check it again and report back. Regards Patrick Link to comment Share on other sites More sharing options...
Swisspilot 235 Posted September 12, 2016 Share Posted September 12, 2016 Ji Oliver The first thing I did after installing ORBI, was to disable the "baghdad_large.bgl" because I don't like Photosceneries without autogen. That's the reason, ORBI was not listed in my AES2.43a. After activating this bgl file, I can add AES service. Now, is this Photo.lc realy necessary for using AES, or do you have maybe a workaround for this? I can't imagine, that the jetways are in this LC file. Kind Regards Patrick Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted September 12, 2016 Author Developer Share Posted September 12, 2016 vor 32 Minuten, Swisspilot sagte: Now, is this Photo.lc realy necessary for using AES, or do you have maybe a workaround for this? I can't imagine, that the jetways are in this LC file. There are no better files in the folder naming the scenery as ORBI (ORBS), the afcad is also not a good identifier. But I have changed the cfg, maybe that helps you. Unpack the Zip to the <FS>\Aerosoft\AES\AIRPORT Folder. Fix ORBI without LC.zip Link to comment Share on other sites More sharing options...
Swisspilot 235 Posted September 13, 2016 Share Posted September 13, 2016 vor 20 Stunden , OPabst sagte: There are no better files in the folder naming the scenery as ORBI (ORBS), the afcad is also not a good identifier. But I have changed the cfg, maybe that helps you. Unpack the Zip to the <FS>\Aerosoft\AES\AIRPORT Folder. Fix ORBI without LC.zip Perfect service Oli! Thank you very much. Just tried it now and it works perfect. Kind Regards Patrick Link to comment Share on other sites More sharing options...
Jehad Hamdan 1 Posted September 25, 2016 Share Posted September 25, 2016 Hello Oliver, I can't tell you how I was waiting a lot OEJN to be included here. I checked your note regarding the FSX version and I want to ask; can't you ignore the jet way and implement all remaining features? The jet ways are located at Apron 7 which we rarely use it (for hajj season only). Main aprons are 1 to 5 and they don't have any jet ways. thanks Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted September 25, 2016 Author Developer Share Posted September 25, 2016 vor 33 Minuten, Jehad Hamdan sagte: Hello Oliver, I can't tell you how I was waiting a lot OEJN to be included here. I checked your note regarding the FSX version and I want to ask; can't you ignore the jet way and implement all remaining features? The jet ways are located at Apron 7 which we rarely use it (for hajj season only). Main aprons are 1 to 5 and they don't have any jet ways. thanks The problem is, that nobody will read a releated note and then we have support issues, because the user will ask why the Jetways don't work. But you may can ask BDOAviation, if they are willing to provide a different Mastero.dll version, where the jetways are remove, then I can make a FSX Version too. As the dll has no config file, I can't provide a different config, as it is possible for Airports useing SODE, the I can replace the XML to remove the AES related objects, without effecting other object placed via the DLL. Link to comment Share on other sites More sharing options...
Jehad Hamdan 1 Posted September 26, 2016 Share Posted September 26, 2016 On 9/25/2016 at 9:50 AM, OPabst said: The problem is, that nobody will read a releated note and then we have support issues, because the user will ask why the Jetways don't work. But you may can ask BDOAviation, if they are willing to provide a different Mastero.dll version, where the jetways are remove, then I can make a FSX Version too. As the dll has no config file, I can't provide a different config, as it is possible for Airports useing SODE, the I can replace the XML to remove the AES related objects, without effecting other object placed via the DLL. Thanks for your reply Oliver, I am going to contact BDOAviation and report your comments hope they can do something. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.